lkml.org 
[lkml]   [2011]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 09/19] ktest: Add POST/PRE_BUILD options
From: Steven Rostedt <srostedt@redhat.com>

There are some cases that a patch may be needed to apply to the kernel
in patchcheck or bisect tests. Adding a PRE_BUILD option to apply the
patch and POST_BUILD to remove it, allows for this to be done easily.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
tools/testing/ktest/ktest.pl | 31 ++++++++++++++++++++++++++++---
tools/testing/ktest/sample.conf | 32 ++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+), 3 deletions(-)

diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index fb46e12..d0e1de6 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -63,6 +63,10 @@ my $output_config;
my $test_type;
my $build_type;
my $build_options;
+my $pre_build;
+my $post_build;
+my $pre_build_die;
+my $post_build_die;
my $reboot_type;
my $reboot_script;
my $power_cycle;
@@ -1189,6 +1193,14 @@ sub build {

unlink $buildlog;

+ if (defined($pre_build)) {
+ my $ret = run_command $pre_build;
+ if (!$ret && defined($pre_build_die) &&
+ $pre_build_die) {
+ dodie "failed to pre_build\n";
+ }
+ }
+
if ($type =~ /^useconfig:(.*)/) {
run_command "cp $1 $output_config" or
dodie "could not copy $1 to .config";
@@ -1236,13 +1248,22 @@ sub build {
make_oldconfig;

$redirect = "$buildlog";
- if (!run_command "$make $build_options") {
- undef $redirect;
+ my $build_ret = run_command "$make $build_options";
+ undef $redirect;
+
+ if (defined($post_build)) {
+ my $ret = run_command $post_build;
+ if (!$ret && defined($post_build_die) &&
+ $post_build_die) {
+ dodie "failed to post_build\n";
+ }
+ }
+
+ if (!$build_ret) {
# bisect may need this to pass
return 0 if ($in_bisect);
fail "failed build" and return 0;
}
- undef $redirect;

return 1;
}
@@ -2244,6 +2265,10 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
$test_type = set_test_option("TEST_TYPE", $i);
$build_type = set_test_option("BUILD_TYPE", $i);
$build_options = set_test_option("BUILD_OPTIONS", $i);
+ $pre_build = set_test_option("PRE_BUILD", $i);
+ $post_build = set_test_option("POST_BUILD", $i);
+ $pre_build_die = set_test_option("PRE_BUILD_DIE", $i);
+ $post_build_die = set_test_option("POST_BUILD_DIE", $i);
$power_cycle = set_test_option("POWER_CYCLE", $i);
$reboot = set_test_option("REBOOT", $i);
$noclean = set_test_option("BUILD_NOCLEAN", $i);
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
index 0e5f764..1092e47 100644
--- a/tools/testing/ktest/sample.conf
+++ b/tools/testing/ktest/sample.conf
@@ -293,6 +293,38 @@
# or on some systems:
#POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION

+# If there is a script that you require to run before the build is done
+# you can specify it with PRE_BUILD.
+#
+# One example may be if you must add a temporary patch to the build to
+# fix a unrelated bug to perform a patchcheck test. This will apply the
+# patch before each build that is made. Use the POST_BUILD to do a git reset --hard
+# to remove the patch.
+#
+# (default undef)
+#PRE_BUILD = cd ${BUILD_DIR} && patch -p1 < /tmp/temp.patch
+
+# To specify if the test should fail if the PRE_BUILD fails,
+# PRE_BUILD_DIE needs to be set to 1. Otherwise the PRE_BUILD
+# result is ignored.
+# (default 0)
+# PRE_BUILD_DIE = 1
+
+# If there is a script that should run after the build is done
+# you can specify it with POST_BUILD.
+#
+# As the example in PRE_BUILD, POST_BUILD can be used to reset modifications
+# made by the PRE_BUILD.
+#
+# (default undef)
+#POST_BUILD = cd ${BUILD_DIR} && git reset --hard
+
+# To specify if the test should fail if the POST_BUILD fails,
+# POST_BUILD_DIE needs to be set to 1. Otherwise the POST_BUILD
+# result is ignored.
+# (default 0)
+#POST_BUILD_DIE = 1
+
# Way to reboot the box to the test kernel.
# Only valid options so far are "grub" and "script"
# (default grub)
--
1.7.5.4



\
 
 \ /
  Last update: 2011-07-26 03:31    [W:0.122 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site