lkml.org 
[lkml]   [2011]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/6 v2] gpio-pch: Save register value in suspend()
Date
Currently, when suspend is occurred, register im0/1 and gpio_use_sel are not
saved.
This patch modifies so that register im0/1 and gpio_use_sel are saved.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
---
drivers/gpio/gpio-pch.c | 22 +++++++++++++++++++++-
1 files changed, 21 insertions(+), 1 deletions(-)
diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c
index 4ac69bd..7f773af 100644
--- a/drivers/gpio/gpio-pch.c
+++ b/drivers/gpio/gpio-pch.c
@@ -30,7 +30,8 @@ struct pch_regs {
u32 pm;
u32 im0;
u32 im1;
- u32 reserved[4];
+ u32 reserved[3];
+ u32 gpio_use_sel;
u32 reset;
};

@@ -51,10 +52,17 @@ static int gpio_pins[] = {
* struct pch_gpio_reg_data - The register store data.
* @po_reg: To store contents of PO register.
* @pm_reg: To store contents of PM register.
+ * @im0_reg: To store contents of IM0 register.
+ * @im1_reg: To store contents of IM1 register.
+ * @gpio_use_sel_reg : To store contents of GPIO_USE_SEL register.
+ * (Only ML7223 Bus-n)
*/
struct pch_gpio_reg_data {
u32 po_reg;
u32 pm_reg;
+ u32 im0_reg;
+ u32 im1_reg;
+ u32 gpio_use_sel_reg;
};

/**
@@ -149,6 +157,12 @@ static void pch_gpio_save_reg_conf(struct pch_gpio *chip)
{
chip->pch_gpio_reg.po_reg = ioread32(&chip->reg->po);
chip->pch_gpio_reg.pm_reg = ioread32(&chip->reg->pm);
+ chip->pch_gpio_reg.im0_reg = ioread32(&chip->reg->im0);
+ if (chip->ioh == INTEL_EG20T_PCH)
+ chip->pch_gpio_reg.im1_reg = ioread32(&chip->reg->im1);
+ if (chip->ioh == OKISEMI_ML7223n_IOH)
+ chip->pch_gpio_reg.gpio_use_sel_reg =\
+ ioread32(&chip->reg->gpio_use_sel);
}

/*
@@ -160,6 +174,12 @@ static void pch_gpio_restore_reg_conf(struct pch_gpio *chip)
iowrite32(chip->pch_gpio_reg.po_reg, &chip->reg->po);
/* to store contents of PM register */
iowrite32(chip->pch_gpio_reg.pm_reg, &chip->reg->pm);
+ iowrite32(chip->pch_gpio_reg.im0_reg, &chip->reg->im0);
+ if (chip->ioh == INTEL_EG20T_PCH)
+ iowrite32(chip->pch_gpio_reg.im1_reg, &chip->reg->im1);
+ if (chip->ioh == OKISEMI_ML7223n_IOH)
+ iowrite32(chip->pch_gpio_reg.gpio_use_sel_reg,
+ &chip->reg->gpio_use_sel);
}

static void pch_gpio_setup(struct pch_gpio *chip)
--
1.7.4.4


\
 
 \ /
  Last update: 2011-07-21 02:25    [W:0.238 / U:0.980 seconds]
©2003-2014 Jasper Spaans. Advertise on this site