lkml.org 
[lkml]   [2011]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] ARM: vexpress: Add clock definition for the SP805.
Date
It seems that an entry for the SP805 watchdog in the table of clocks was
missing. This results in the sp805_wdt driver rejecting the device with
the following errors:

sp805-wdt mb:wdt: Clock not found
sp805-wdt mb:wdt: Probe Failed!!!
sp805-wdt: probe of mb:wdt failed with error -2

While not obviously stated in the hardware docs, the onboard SP810's
"REFCLK" is connected to a 32.768KHz crystal, and this drives the
watchdog. Add a struct clk and corresponding lookup entry for it.

Signed-off-by: Nick Bowler <nbowler@elliptictech.com>
---
arch/arm/mach-vexpress/v2m.c | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 9e6b93b..d0d267a 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -318,6 +318,10 @@ static struct clk v2m_sp804_clk = {
.rate = 1000000,
};

+static struct clk v2m_ref_clk = {
+ .rate = 32768,
+};
+
static struct clk dummy_apb_pclk;

static struct clk_lookup v2m_lookups[] = {
@@ -348,6 +352,9 @@ static struct clk_lookup v2m_lookups[] = {
}, { /* CLCD */
.dev_id = "mb:clcd",
.clk = &osc1_clk,
+ }, { /* SP805 WDT */
+ .dev_id = "mb:wdt",
+ .clk = &v2m_ref_clk,
}, { /* SP804 timers */
.dev_id = "sp804",
.con_id = "v2m-timer0",
--
1.7.3.4


\
 
 \ /
  Last update: 2011-07-15 17:07    [W:0.078 / U:0.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site