lkml.org 
[lkml]   [2011]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRE: [Linaro-mm-sig] [PATCH 6/8] drivers: add Contiguous Memory Allocator
Hello,

On Saturday, July 09, 2011 4:57 PM Janusz Krzysztofik wrote:

> On Wed, 6 Jul 2011 at 16:59:45 Arnd Bergmann wrote:
> > On Wednesday 06 July 2011, Nicolas Pitre wrote:
> > > On Wed, 6 Jul 2011, Russell King - ARM Linux wrote:
> > > > Another issue is that when a platform has restricted DMA regions,
> > > > they typically don't fall into the highmem zone. As the
> > > > dmabounce code allocates from the DMA coherent allocator to
> > > > provide it with guaranteed DMA-able memory, that would be rather
> > > > inconvenient.
> > >
> > > Do we encounter this in practice i.e. do those platforms requiring
> > > large contiguous allocations motivating this work have such DMA
> > > restrictions?
> >
> > You can probably find one or two of those, but we don't have to
> > optimize for that case. I would at least expect the maximum size of
> > the allocation to be smaller than the DMA limit for these, and
> > consequently mandate that they define a sufficiently large
> > CONSISTENT_DMA_SIZE for the crazy devices, or possibly add a hack to
> > unmap some low memory and call
> > dma_declare_coherent_memory() for the device.
>
> Once found that Russell has dropped his "ARM: DMA: steal memory for DMA
> coherent mappings" for now, let me get back to this idea of a hack that
> would allow for safely calling dma_declare_coherent_memory() in order to
> assign a device with a block of contiguous memory for exclusive use.

We tested such approach and finally with 3.0-rc1 it works fine. You can find
an example for dma_declare_coherent() together with required memblock_remove()
calls in the following patch series:
http://www.spinics.net/lists/linux-samsung-soc/msg05026.html
"[PATCH 0/3 v2] ARM: S5P: Add support for MFC device on S5PV210 and EXYNOS4"

> Assuming there should be no problem with successfully allocating a large
> continuous block of coherent memory at boot time with
> dma_alloc_coherent(), this block could be reserved for the device. The
> only problem is with the dma_declare_coherent_memory() calling
> ioremap(), which was designed with a device's dedicated physical memory
> in mind, but shouldn't be called on a memory already mapped.

All these issues with ioremap has been finally resolved in 3.0-rc1. Like
Russell pointed me in http://www.spinics.net/lists/arm-kernel/msg127644.html,
ioremap can be fixed to work on early reserved memory areas by selecting
ARCH_HAS_HOLES_MEMORYMODEL Kconfig option.

> There were three approaches proposed, two of them in August 2010:
> http://www.spinics.net/lists/linux-media/msg22179.html,
> http://www.spinics.net/lists/arm-kernel/msg96318.html,
> and a third one in January 2011:
> http://www.spinics.net/lists/linux-arch/msg12637.html.
>
> As far as I can understand the reason why both of the first two were
> NAKed, it was suggested that videobuf-dma-contig shouldn't use coherent
> if all it requires is a contiguous memory, and a new API should be
> invented, or dma_pool API extended, for providing contiguous memory.

This is another story. DMA-mapping framework definitely needs some
extensions to allow more detailed specification of the allocated memory
(currently we have only coherent and nearly ARM-specific writecombine).
During Linaro Memory Management summit we agreed that the
dma_alloc_attrs() function might be needed to clean-up the API and
provide a nice way of adding new memory parameters. Having a possibility
to allocate contiguous cached buffers might be one of the new DMA
attributes. Here are some details of my proposal:
http://www.spinics.net/lists/linux-mm/msg21235.html

> The
> CMA was pointed out as a new work in progress contiguous memory API.

That was probably the biggest mistake at the beginning. We definitely
should have learned dma-mapping framework and its internals.

> Now
> it turns out it's not, it's only a helper to ensure that
> dma_alloc_coherent() always succeeds, and videobuf2-dma-contig is still
> going to allocate buffers from coherent memory.

I hope that once the dma_alloc_attrs() API will be accepted, I will add
support for memory attributes to videobuf2-dma-contig allocator.

> (CCing both authors, Marin Mitov and Guennadi Liakhovetski, and their
> main opponent, FUJITA Tomonori)
>
> The third solution was not discussed much after it was pointed out as
> being not very different from those two in terms of the above mentioned
> rationale.
>
> All three solutions was different from now suggested method of unmapping
> some low memory and then calling dma_declare_coherent_memory() which
> ioremaps it in that those tried to reserve some boot time allocated
> coherent memory, already mapped correctly, without (io)remapping it.
>
> If there are still problems with the CMA on one hand, and a need for a
> hack to handle "crazy devices" is still seen, regardless of CMA
> available and working or not, on the other, maybe we should get back to
> the idea of adopting coherent API to new requirements, review those
> three proposals again and select one which seems most acceptable to
> everyone? Being a submitter of the third, I'll be happy to refresh it if
> selected.

I'm open to discussion.

Best regards
--
Marek Szyprowski
Samsung Poland R&D Center




\
 
 \ /
  Last update: 2011-07-11 15:49    [W:0.097 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site