lkml.org 
[lkml]   [2011]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 3/3] PM: Limit race conditions between runtime PM and system sleep
Date
Hi,

On Friday, July 01, 2011, Kevin Hilman wrote:
> "Rafael J. Wysocki" <rjw@sisk.pl> writes:
>
> > From: Rafael J. Wysocki <rjw@sisk.pl>
> >
> > One of the roles of the PM core is to prevent different PM callbacks
> > executed for the same device object from racing with each other.
> > Unfortunately, after commit e8665002477f0278f84f898145b1f141ba26ee26
> > (PM: Allow pm_runtime_suspend() to succeed during system suspend)
> > runtime PM callbacks may be executed concurrently with system
> > suspend/resume callbacks for the same device.
> >
> > The main reason for commit e8665002477f0278f84f898145b1f141ba26ee26
> > was that some subsystems and device drivers wanted to use runtime PM
> > helpers, pm_runtime_suspend() and pm_runtime_put_sync() in
> > particular, for carrying out the suspend of devices in their
> > .suspend() callbacks. However, as it's been determined recently,
> > there are multiple reasons not to do so, inlcuding:
> >
> > * The caller really doesn't control the runtime PM usage counters,
> > because user space can access them through sysfs and effectively
> > block runtime PM. That means using pm_runtime_suspend() or
> > pm_runtime_get_sync() to suspend devices during system suspend
> > may or may not work.
> >
> > * If a driver calls pm_runtime_suspend() from its .suspend()
> > callback, it causes the subsystem's .runtime_suspend() callback to
> > be executed, which leads to the call sequence:
> >
> > subsys->suspend(dev)
> > driver->suspend(dev)
> > pm_runtime_suspend(dev)
> > subsys->runtime_suspend(dev)
> >
> > recursive from the subsystem's point of view. For some subsystems
> > that may actually work (e.g. the platform bus type), but for some
> > it will fail in a rather spectacular fashion (e.g. PCI). In each
> > case it means a layering violation.
> >
> > * Both the subsystem and the driver can provide .suspend_noirq()
> > callbacks for system suspend that can do whatever the
> > .runtime_suspend() callbacks do just fine, so it really isn't
> > necessary to call pm_runtime_suspend() during system suspend.
> >
> > * The runtime PM's handling of wakeup devices is usually different
> > from the system suspend's one, so .runtime_suspend() may simply be
> > inappropriate for system suspend.
> >
> > * System suspend is supposed to work even if CONFIG_PM_RUNTIME is
> > unset.
> >
> > * The runtime PM workqueue is frozen before system suspend, so if
> > whatever the driver is going to do during system suspend depends
> > on it, that simply won't work.
>
> Thanks for the thorough description of all these reasons.

Well, I thought I had to document them before I would forget again.

> > Still, there is a good reason to allow pm_runtime_resume() to
> > succeed during system suspend and resume (for instance, some
> > subsystems and device drivers may legitimately use it to ensure that
> > their devices are in full-power states before suspending them).
> > Moreover, there is no reason to prevent runtime PM callbacks from
> > being executed in parallel with the system suspend/resume .prepare()
> > and .complete() callbacks and the code removed by commit
> > e8665002477f0278f84f898145b1f141ba26ee26 went too far in this
> > respect. On the other hand, runtime PM callbacks, including
> > .runtime_resume(), must not be executed during system suspend's
> > "late" stage of suspending devices and during system resume's "early"
> > device resume stage.
> >
> > Taking all of the above into consideration, make the PM core
> > acquire a runtime PM reference to every device and resume it if
> > there's a runtime PM resume request pending right before executing
> > the subsystem-level .suspend() callback for it. Make the PM core
> > drop references to all devices right after executing the
> > subsystem-level .resume() callbacks for them. Additionally,
> > make the PM core disable the runtime PM framework for all devices
> > during system suspend, after executing the subsystem-level .suspend()
> > callbacks for them, and enable the runtime PM framework for all
> > devices during system resume, right before executing the
> > subsystem-level .resume() callbacks for them.
> >
> > Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
>
> OK, I'm convinced. :)
>
> Acked-by: Kevin Hilman <khilman@ti.com>

Cool, thanks. :-)

> Minor documentation comment below...
>
> > Documentation/power/runtime_pm.txt | 20 ++++++++++++++++++++
> > drivers/base/power/main.c | 27 ++++++++++++++++++++++-----
> > 2 files changed, 42 insertions(+), 5 deletions(-)
> >
> > Index: linux-2.6/drivers/base/power/main.c
> > ===================================================================
> > --- linux-2.6.orig/drivers/base/power/main.c
> > +++ linux-2.6/drivers/base/power/main.c
> > @@ -505,6 +505,7 @@ static int legacy_resume(struct device *
> > static int device_resume(struct device *dev, pm_message_t state, bool async)
> > {
> > int error = 0;
> > + bool put = false;
> >
> > TRACE_DEVICE(dev);
> > TRACE_RESUME(0);
> > @@ -521,6 +522,9 @@ static int device_resume(struct device *
> > if (!dev->power.is_suspended)
> > goto Unlock;
> >
> > + pm_runtime_enable(dev);
> > + put = true;
> > +
> > if (dev->pm_domain) {
> > pm_dev_dbg(dev, state, "power domain ");
> > error = pm_op(dev, &dev->pm_domain->ops, state);
> > @@ -563,6 +567,10 @@ static int device_resume(struct device *
> > complete_all(&dev->power.completion);
> >
> > TRACE_RESUME(error);
> > +
> > + if (put)
> > + pm_runtime_put_sync(dev);
> > +
> > return error;
> > }
> >
> > @@ -843,16 +851,22 @@ static int __device_suspend(struct devic
> > int error = 0;
> >
> > dpm_wait_for_children(dev, async);
> > - device_lock(dev);
> >
> > if (async_error)
> > - goto Unlock;
> > + return 0;
> > +
> > + pm_runtime_get_noresume(dev);
> > + if (pm_runtime_barrier(dev) && device_may_wakeup(dev))
> > + pm_wakeup_event(dev, 0);
> > if (pm_wakeup_pending()) {
> > + pm_runtime_put_sync(dev);
> > async_error = -EBUSY;
> > - goto Unlock;
> > + return 0;
> > }
> >
> > + device_lock(dev);
> > +
> > if (dev->pm_domain) {
> > pm_dev_dbg(dev, state, "power domain ");
> > error = pm_op(dev, &dev->pm_domain->ops, state);
> > @@ -890,12 +904,15 @@ static int __device_suspend(struct devic
> > End:
> > dev->power.is_suspended = !error;
> >
> > - Unlock:
> > device_unlock(dev);
> > complete_all(&dev->power.completion);
> >
> > - if (error)
> > + if (error) {
> > + pm_runtime_put_sync(dev);
> > async_error = error;
> > + } else if (dev->power.is_suspended) {
> > + __pm_runtime_disable(dev, false);
> > + }
> >
> > return error;
> > }
> > Index: linux-2.6/Documentation/power/runtime_pm.txt
> > ===================================================================
> > --- linux-2.6.orig/Documentation/power/runtime_pm.txt
> > +++ linux-2.6/Documentation/power/runtime_pm.txt
> > @@ -567,6 +567,11 @@ this is:
> > pm_runtime_set_active(dev);
> > pm_runtime_enable(dev);
> >
> > +The PM core always increments the run-time usage counter before calling the
> > +->suspend() callback and decrements it after calling the ->resume() callback.
> > +Hence disabling run-time PM temporarily like this will not cause any run-time
> > +suspend callbacks to be lost.
> > +
> > On some systems, however, system sleep is not entered through a global firmware
> > or hardware operation. Instead, all hardware components are put into low-power
> > states directly by the kernel in a coordinated way. Then, the system sleep
> > @@ -579,6 +584,21 @@ place (in particular, if the system is n
> > be more efficient to leave the devices that had been suspended before the system
> > suspend began in the suspended state.
> >
> > +The PM core does its best to reduce the probability of race conditions between
> > +the runtime PM and system suspend/resume (and hibernation) callbacks by carrying
> > +out the following operations:
> > +
> > + * During system suspend it acquires a runtime PM reference to every device
> > + and resume it if there's a runtime PM resume request pending right before
>
> minor: s/resume/resumes/

That has been changed in the latest version:
https://patchwork.kernel.org/patch/919622/

Thanks,
Rafael


\
 
 \ /
  Last update: 2011-07-01 21:53    [W:0.169 / U:0.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site