lkml.org 
[lkml]   [2011]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] mfd: ab5500 chip register access
Date
The analog baseband chip ab5500 is a multi functional chip
containing regulators, charging, gpio, USB and accessory detect.
It also contain various multimedia functionalities like digital
encoder and audio codec.
The core driver added with this patch provides register access via
i2c via PRCMU. Event handling implemented as irq_chip will come in
future patches since it depends on PRCMU functionality not yet
implemented.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/mfd/Kconfig | 9 +
drivers/mfd/Makefile | 1 +
drivers/mfd/ab5500-core.c | 2312 +++++++++++++++++++++++++++++++++++++
include/linux/mfd/ab5500/ab5500.h | 140 +++
include/linux/mfd/abx500.h | 4 +-
5 files changed, 2464 insertions(+), 2 deletions(-)
create mode 100644 drivers/mfd/ab5500-core.c
create mode 100644 include/linux/mfd/ab5500/ab5500.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 0f09c05..12d1184 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -539,6 +539,15 @@ config EZX_PCAP
This enables the PCAP ASIC present on EZX Phones. This is
needed for MMC, TouchScreen, Sound, USB, etc..

+config AB5500_CORE
+ bool "ST-Ericsson AB5500 Mixed Signal Power Management chip"
+ depends on ABX500_CORE && MFD_DB5500_PRCMU
+ select MFD_CORE
+ help
+ Select this option to enable access to AB5500 power management
+ chip. This connects to the db5500 chip via the I2C bus via PRCMU.
+ This chip embeds various other multimedia funtionalities as well.
+
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
depends on GENERIC_HARDIRQS && ABX500_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index efe3cc3..53a96d5 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -73,6 +73,7 @@ obj-$(CONFIG_ABX500_CORE) += abx500-core.o
obj-$(CONFIG_AB3100_CORE) += ab3100-core.o
obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o
obj-$(CONFIG_AB3550_CORE) += ab3550-core.o
+obj-$(CONFIG_AB5500_CORE) += ab5500-core.o
obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o
obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o
obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o
diff --git a/drivers/mfd/ab5500-core.c b/drivers/mfd/ab5500-core.c
new file mode 100644
index 0000000..afec0f2
--- /dev/null
+++ b/drivers/mfd/ab5500-core.c
@@ -0,0 +1,2312 @@
+/*
+ * Copyright (C) 2007-2011 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Low-level core for exclusive access to the AB5500 IC on the I2C bus
+ * and some basic chip-configuration.
+ * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
+ * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ * Author: Karl Komierowski <karl.komierowski@stericsson.com>
+ * Author: Bibek Basu <bibek.basu@stericsson.com>
+ *
+ * TODO: Event handling with irq_chip. Waiting for PRCMU fw support.
+ */
+
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/random.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+#include <linux/mfd/ab5500/ab5500.h>
+#include <linux/mfd/abx500.h>
+#include <linux/list.h>
+#include <linux/bitops.h>
+#include <linux/spinlock.h>
+#include <linux/mfd/core.h>
+#include <linux/version.h>
+#include <linux/mfd/db5500-prcmu.h>
+
+#define AB5500_NUM_EVENT_REG 23
+#define AB5500_IT_LATCH0_REG 0x40
+#define AB5500_IT_MASK0_REG 0x60
+
+/* Read/write operation values. */
+#define AB5500_PERM_RD (0x01)
+#define AB5500_PERM_WR (0x02)
+
+/* Read/write permissions. */
+#define AB5500_PERM_RO (AB5500_PERM_RD)
+#define AB5500_PERM_RW (AB5500_PERM_RD | AB5500_PERM_WR)
+
+#define AB5500_MASK_BASE (0x60)
+#define AB5500_MASK_END (0x79)
+#define AB5500_CHIP_ID (0x20)
+
+/**
+ * struct ab5500_bank
+ * @slave_addr: I2C slave_addr found in AB5500 specification
+ * @name: Documentation name of the bank. For reference
+ */
+struct ab5500_bank {
+ u8 slave_addr;
+ const char *name;
+};
+
+static const struct ab5500_bank bankinfo[AB5500_NUM_BANKS] = {
+ [AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = {
+ AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP, "VIT_IO_I2C_CLK_TST_OTP"},
+ [AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = {
+ AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST, "VDDDIG_IO_I2C_CLK_TST"},
+ [AB5500_BANK_VDENC] = {AB5500_ADDR_VDENC, "VDENC"},
+ [AB5500_BANK_SIM_USBSIM] = {AB5500_ADDR_SIM_USBSIM, "SIM_USBSIM"},
+ [AB5500_BANK_LED] = {AB5500_ADDR_LED, "LED"},
+ [AB5500_BANK_ADC] = {AB5500_ADDR_ADC, "ADC"},
+ [AB5500_BANK_RTC] = {AB5500_ADDR_RTC, "RTC"},
+ [AB5500_BANK_STARTUP] = {AB5500_ADDR_STARTUP, "STARTUP"},
+ [AB5500_BANK_DBI_ECI] = {AB5500_ADDR_DBI_ECI, "DBI-ECI"},
+ [AB5500_BANK_CHG] = {AB5500_ADDR_CHG, "CHG"},
+ [AB5500_BANK_FG_BATTCOM_ACC] = {
+ AB5500_ADDR_FG_BATTCOM_ACC, "FG_BATCOM_ACC"},
+ [AB5500_BANK_USB] = {AB5500_ADDR_USB, "USB"},
+ [AB5500_BANK_IT] = {AB5500_ADDR_IT, "IT"},
+ [AB5500_BANK_VIBRA] = {AB5500_ADDR_VIBRA, "VIBRA"},
+ [AB5500_BANK_AUDIO_HEADSETUSB] = {
+ AB5500_ADDR_AUDIO_HEADSETUSB, "AUDIO_HEADSETUSB"},
+};
+
+/**
+ * struct ab5500_reg_range
+ * @first: the first address of the range
+ * @last: the last address of the range
+ * @perm: access permissions for the range
+ */
+struct ab5500_reg_range {
+ u8 first;
+ u8 last;
+ u8 perm;
+};
+
+/**
+ * struct ab5500_i2c_ranges
+ * @count: the number of ranges in the list
+ * @range: the list of register ranges
+ */
+struct ab5500_i2c_ranges {
+ u8 nranges;
+ u8 bankid;
+ const struct ab5500_reg_range *range;
+};
+
+/**
+ * struct ab5500_i2c_banks
+ * @count: the number of ranges in the list
+ * @range: the list of register ranges
+ */
+struct ab5500_i2c_banks {
+ u8 nbanks;
+ const struct ab5500_i2c_ranges *bank;
+};
+
+/*
+ * Permissible register ranges for reading and writing per device and bank.
+ *
+ * The ranges must be listed in increasing address order, and no overlaps are
+ * allowed. It is assumed that write permission implies read permission
+ * (i.e. only RO and RW permissions should be used). Ranges with write
+ * permission must not be split up.
+ */
+
+#define NO_RANGE {.count = 0, .range = NULL,}
+static struct ab5500_i2c_banks ab5500_bank_ranges[AB5500_NUM_DEVICES] = {
+ [AB5500_DEVID_USB] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_USB,
+ .nranges = 12,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x01,
+ .last = 0x01,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x80,
+ .last = 0x83,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x87,
+ .last = 0x8A,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x8B,
+ .last = 0x8B,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x91,
+ .last = 0x92,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x93,
+ .last = 0x93,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x94,
+ .last = 0x94,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xA8,
+ .last = 0xB0,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xB2,
+ .last = 0xB2,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xB4,
+ .last = 0xBC,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xBF,
+ .last = 0xBF,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xC1,
+ .last = 0xC5,
+ .perm = AB5500_PERM_RO,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_ADC] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_ADC,
+ .nranges = 6,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x1F,
+ .last = 0x22,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x23,
+ .last = 0x24,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x26,
+ .last = 0x2D,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x2F,
+ .last = 0x34,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x37,
+ .last = 0x57,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x58,
+ .last = 0x58,
+ .perm = AB5500_PERM_RO,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_LEDS] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_LED,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x0C,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_VIDEO] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_VDENC,
+ .nranges = 12,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x08,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x09,
+ .last = 0x09,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x0A,
+ .last = 0x12,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x15,
+ .last = 0x19,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x1B,
+ .last = 0x21,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x27,
+ .last = 0x2C,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x41,
+ .last = 0x41,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x45,
+ .last = 0x5B,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x5D,
+ .last = 0x5D,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x69,
+ .last = 0x69,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x6C,
+ .last = 0x6D,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x80,
+ .last = 0x81,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_REGULATORS] = {
+ .nbanks = 2,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_STARTUP,
+ .nranges = 12,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x01,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x1F,
+ .last = 0x1F,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x2E,
+ .last = 0x2E,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x2F,
+ .last = 0x30,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x50,
+ .last = 0x51,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x60,
+ .last = 0x61,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x66,
+ .last = 0x8A,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x8C,
+ .last = 0x96,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xAA,
+ .last = 0xB4,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xB7,
+ .last = 0xBF,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xC1,
+ .last = 0xCA,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xD3,
+ .last = 0xE0,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ {
+ .bankid = AB5500_BANK_SIM_USBSIM,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x13,
+ .last = 0x19,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_SIM] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_SIM_USBSIM,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x13,
+ .last = 0x19,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_RTC] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_RTC,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x04,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x06,
+ .last = 0x0C,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_CHARGER] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_CHG,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x11,
+ .last = 0x11,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x12,
+ .last = 0x1B,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_FUELGAUGE] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_FG_BATTCOM_ACC,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x0B,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x0C,
+ .last = 0x10,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_VIBRATOR] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_VIBRA,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x10,
+ .last = 0x13,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xFE,
+ .last = 0xFE,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_CODEC] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_AUDIO_HEADSETUSB,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x48,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xEB,
+ .last = 0xFB,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_POWER] = {
+ .nbanks = 2,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_STARTUP,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x30,
+ .last = 0x30,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ {
+ .bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x01,
+ .last = 0x01,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+};
+
+#define AB5500_IRQ(bank, bit) ((bank) * 8 + (bit))
+
+/* I appologize for the resource names beeing a mix of upper case
+ * and lower case but I want them to be exact as the documentation */
+static struct mfd_cell ab5500_devs[AB5500_NUM_DEVICES] = {
+ [AB5500_DEVID_LEDS] = {
+ .name = "ab5500-leds",
+ .id = AB5500_DEVID_LEDS,
+ },
+ [AB5500_DEVID_POWER] = {
+ .name = "ab5500-power",
+ .id = AB5500_DEVID_POWER,
+ },
+ [AB5500_DEVID_REGULATORS] = {
+ .name = "ab5500-regulator",
+ .id = AB5500_DEVID_REGULATORS,
+ },
+ [AB5500_DEVID_SIM] = {
+ .name = "ab5500-sim",
+ .id = AB5500_DEVID_SIM,
+ .num_resources = 1,
+ .resources = (struct resource[]) {
+ {
+ .name = "SIMOFF",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(2, 0), /*rising*/
+ .end = AB5500_IRQ(2, 1), /*falling*/
+ },
+ },
+ },
+ [AB5500_DEVID_RTC] = {
+ .name = "ab5500-rtc",
+ .id = AB5500_DEVID_RTC,
+ .num_resources = 1,
+ .resources = (struct resource[]) {
+ {
+ .name = "RTC_Alarm",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(1, 7),
+ .end = AB5500_IRQ(1, 7),
+ }
+ },
+ },
+ [AB5500_DEVID_CHARGER] = {
+ .name = "ab5500-charger",
+ .id = AB5500_DEVID_CHARGER,
+ },
+ [AB5500_DEVID_ADC] = {
+ .name = "ab5500-adc",
+ .id = AB5500_DEVID_ADC,
+ .num_resources = 10,
+ .resources = (struct resource[]) {
+ {
+ .name = "TRIGGER-0",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 0),
+ .end = AB5500_IRQ(0, 0),
+ },
+ {
+ .name = "TRIGGER-1",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 1),
+ .end = AB5500_IRQ(0, 1),
+ },
+ {
+ .name = "TRIGGER-2",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 2),
+ .end = AB5500_IRQ(0, 2),
+ },
+ {
+ .name = "TRIGGER-3",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 3),
+ .end = AB5500_IRQ(0, 3),
+ },
+ {
+ .name = "TRIGGER-4",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 4),
+ .end = AB5500_IRQ(0, 4),
+ },
+ {
+ .name = "TRIGGER-5",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 5),
+ .end = AB5500_IRQ(0, 5),
+ },
+ {
+ .name = "TRIGGER-6",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 6),
+ .end = AB5500_IRQ(0, 6),
+ },
+ {
+ .name = "TRIGGER-7",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 7),
+ .end = AB5500_IRQ(0, 7),
+ },
+ {
+ .name = "TRIGGER-VBAT",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 8),
+ .end = AB5500_IRQ(0, 8),
+ },
+ {
+ .name = "TRIGGER-VBAT-TXON",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 9),
+ .end = AB5500_IRQ(0, 9),
+ },
+ },
+ },
+ [AB5500_DEVID_FUELGAUGE] = {
+ .name = "ab5500-fuelgauge",
+ .id = AB5500_DEVID_FUELGAUGE,
+ .num_resources = 6,
+ .resources = (struct resource[]) {
+ {
+ .name = "Batt_attach",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(7, 5),
+ .end = AB5500_IRQ(7, 5),
+ },
+ {
+ .name = "Batt_removal",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(7, 6),
+ .end = AB5500_IRQ(7, 6),
+ },
+ {
+ .name = "UART_framing",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(7, 7),
+ .end = AB5500_IRQ(7, 7),
+ },
+ {
+ .name = "UART_overrun",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 0),
+ .end = AB5500_IRQ(8, 0),
+ },
+ {
+ .name = "UART_Rdy_RX",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 1),
+ .end = AB5500_IRQ(8, 1),
+ },
+ {
+ .name = "UART_Rdy_TX",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 2),
+ .end = AB5500_IRQ(8, 2),
+ },
+ },
+ },
+ [AB5500_DEVID_VIBRATOR] = {
+ .name = "ab5500-vibrator",
+ .id = AB5500_DEVID_VIBRATOR,
+ },
+ [AB5500_DEVID_CODEC] = {
+ .name = "ab5500-codec",
+ .id = AB5500_DEVID_CODEC,
+ .num_resources = 3,
+ .resources = (struct resource[]) {
+ {
+ .name = "audio_spkr1_ovc",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 5),
+ .end = AB5500_IRQ(9, 5),
+ },
+ {
+ .name = "audio_plllocked",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 6),
+ .end = AB5500_IRQ(9, 6),
+ },
+ {
+ .name = "audio_spkr2_ovc",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(17, 4),
+ .end = AB5500_IRQ(17, 4),
+ },
+ },
+ },
+ [AB5500_DEVID_USB] = {
+ .name = "ab5500-usb",
+ .id = AB5500_DEVID_USB,
+ .num_resources = 36,
+ .resources = (struct resource[]) {
+ {
+ .name = "Link_Update",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(22, 1),
+ .end = AB5500_IRQ(22, 1),
+ },
+ {
+ .name = "DCIO",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 3),
+ .end = AB5500_IRQ(8, 4),
+ },
+ {
+ .name = "VBUS_R",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 5),
+ .end = AB5500_IRQ(8, 5),
+ },
+ {
+ .name = "VBUS_F",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 6),
+ .end = AB5500_IRQ(8, 6),
+ },
+ {
+ .name = "CHGstate_10_PCVBUSchg",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 7),
+ .end = AB5500_IRQ(8, 7),
+ },
+ {
+ .name = "DCIOreverse_ovc",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 0),
+ .end = AB5500_IRQ(9, 0),
+ },
+ {
+ .name = "USBCharDetDone",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 1),
+ .end = AB5500_IRQ(9, 1),
+ },
+ {
+ .name = "DCIO_no_limit",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 2),
+ .end = AB5500_IRQ(9, 2),
+ },
+ {
+ .name = "USB_suspend",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 3),
+ .end = AB5500_IRQ(9, 3),
+ },
+ {
+ .name = "DCIOreverse_fwdcurrent",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 4),
+ .end = AB5500_IRQ(9, 4),
+ },
+ {
+ .name = "Vbus_Imeasmax_change",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 5),
+ .end = AB5500_IRQ(9, 6),
+ },
+ {
+ .name = "OVV",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 5),
+ .end = AB5500_IRQ(14, 5),
+ },
+ {
+ .name = "USBcharging_NOTok",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(15, 3),
+ .end = AB5500_IRQ(15, 3),
+ },
+ {
+ .name = "usb_adp_sensoroff",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(15, 6),
+ .end = AB5500_IRQ(15, 6),
+ },
+ {
+ .name = "usb_adp_probeplug",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(15, 7),
+ .end = AB5500_IRQ(15, 7),
+ },
+ {
+ .name = "usb_adp_sinkerror",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(16, 0),
+ .end = AB5500_IRQ(16, 6),
+ },
+ {
+ .name = "usb_adp_sourceerror",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(16, 1),
+ .end = AB5500_IRQ(16, 1),
+ },
+ {
+ .name = "usb_idgnd_r",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(16, 2),
+ .end = AB5500_IRQ(16, 2),
+ },
+ {
+ .name = "usb_idgnd_f",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(16, 3),
+ .end = AB5500_IRQ(16, 3),
+ },
+ {
+ .name = "usb_iddetR1",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(16, 4),
+ .end = AB5500_IRQ(16, 5),
+ },
+ {
+ .name = "usb_iddetR2",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(16, 6),
+ .end = AB5500_IRQ(16, 7),
+ },
+ {
+ .name = "usb_iddetR3",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(17, 0),
+ .end = AB5500_IRQ(17, 1),
+ },
+ {
+ .name = "usb_iddetR4",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(17, 2),
+ .end = AB5500_IRQ(17, 3),
+ },
+ {
+ .name = "CharTempWindowOk",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(17, 7),
+ .end = AB5500_IRQ(18, 0),
+ },
+ {
+ .name = "USB_SprDetect",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(18, 1),
+ .end = AB5500_IRQ(18, 1),
+ },
+ {
+ .name = "usb_adp_probe_unplug",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(18, 2),
+ .end = AB5500_IRQ(18, 2),
+ },
+ {
+ .name = "VBUSChDrop",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(18, 3),
+ .end = AB5500_IRQ(18, 4),
+ },
+ {
+ .name = "dcio_char_rec_done",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(18, 5),
+ .end = AB5500_IRQ(18, 5),
+ },
+ {
+ .name = "Charging_stopped_by_temp",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(18, 6),
+ .end = AB5500_IRQ(18, 6),
+ },
+ {
+ .name = "CHGstate_11_SafeModeVBUS",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 1),
+ .end = AB5500_IRQ(21, 2),
+ },
+ {
+ .name = "CHGstate_12_comletedVBUS",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 2),
+ .end = AB5500_IRQ(21, 2),
+ },
+ {
+ .name = "CHGstate_13_completedVBUS",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 3),
+ .end = AB5500_IRQ(21, 3),
+ },
+ {
+ .name = "CHGstate_14_FullChgDCIO",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 4),
+ .end = AB5500_IRQ(21, 4),
+ },
+ {
+ .name = "CHGstate_15_SafeModeDCIO",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 5),
+ .end = AB5500_IRQ(21, 5),
+ },
+ {
+ .name = "CHGstate_16_OFFsuspendDCIO",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 6),
+ .end = AB5500_IRQ(21, 6),
+ },
+ {
+ .name = "CHGstate_17_completedDCIO",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 7),
+ .end = AB5500_IRQ(21, 7),
+ },
+ },
+ },
+ [AB5500_DEVID_OTP] = {
+ .name = "ab5500-otp",
+ .id = AB5500_DEVID_OTP,
+ },
+ [AB5500_DEVID_VIDEO] = {
+ .name = "ab5500-video",
+ .id = AB5500_DEVID_VIDEO,
+ .num_resources = 1,
+ .resources = (struct resource[]) {
+ {
+ .name = "plugTVdet",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(22, 2),
+ .end = AB5500_IRQ(22, 2),
+ },
+ },
+ },
+ [AB5500_DEVID_DBIECI] = {
+ .name = "ab5500-dbieci",
+ .id = AB5500_DEVID_DBIECI,
+ .num_resources = 10,
+ .resources = (struct resource[]) {
+ {
+ .name = "COLL",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 0),
+ .end = AB5500_IRQ(14, 0),
+ },
+ {
+ .name = "RESERR",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 1),
+ .end = AB5500_IRQ(14, 1),
+ },
+ {
+ .name = "FRAERR",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 2),
+ .end = AB5500_IRQ(14, 2),
+ },
+ {
+ .name = "COMERR",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 3),
+ .end = AB5500_IRQ(14, 3),
+ },
+ {
+ .name = "BSI_indicator",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 4),
+ .end = AB5500_IRQ(14, 4),
+ },
+ {
+ .name = "SPDSET",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 6),
+ .end = AB5500_IRQ(14, 6),
+ },
+ {
+ .name = "DSENT",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 7),
+ .end = AB5500_IRQ(14, 7),
+ },
+ {
+ .name = "DREC",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(15, 0),
+ .end = AB5500_IRQ(15, 0),
+ },
+ {
+ .name = "ACCINT",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(15, 1),
+ .end = AB5500_IRQ(15, 1),
+ },
+ {
+ .name = "NOPINT",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(15, 2),
+ .end = AB5500_IRQ(15, 2),
+ },
+ },
+ },
+ [AB5500_DEVID_ONSWA] = {
+ .name = "ab5500-onswa",
+ .id = AB5500_DEVID_ONSWA,
+ .num_resources = 2,
+ .resources = (struct resource[]) {
+ {
+ .name = "ONSWAn_rising",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(1, 3),
+ .end = AB5500_IRQ(1, 3),
+ },
+ {
+ .name = "ONSWAn_falling",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(1, 4),
+ .end = AB5500_IRQ(1, 4),
+ },
+ },
+ },
+};
+
+/*
+ * Functionality for getting/setting register values.
+ */
+static int get_register_interruptible(struct ab5500 *ab, u8 bank, u8 reg,
+ u8 *value)
+{
+ int err;
+
+ if (bank >= AB5500_NUM_BANKS)
+ return -EINVAL;
+
+ err = mutex_lock_interruptible(&ab->access_mutex);
+ if (err)
+ return err;
+ err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, reg, value, 1);
+
+ mutex_unlock(&ab->access_mutex);
+ return err;
+}
+
+static int get_register_page_interruptible(struct ab5500 *ab, u8 bank,
+ u8 first_reg, u8 *regvals, u8 numregs)
+{
+ int err;
+
+ if (bank >= AB5500_NUM_BANKS)
+ return -EINVAL;
+
+ err = mutex_lock_interruptible(&ab->access_mutex);
+ if (err)
+ return err;
+
+ while (numregs) {
+ /* The hardware limit for get page is 4 */
+ u8 curnum = min_t(u8, numregs, 4u);
+
+ err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr,
+ first_reg, regvals, curnum);
+ if (err)
+ goto out;
+
+ numregs -= curnum;
+ first_reg += curnum;
+ regvals += curnum;
+ }
+
+out:
+ mutex_unlock(&ab->access_mutex);
+ return err;
+}
+
+static int mask_and_set_register_interruptible(struct ab5500 *ab, u8 bank,
+ u8 reg, u8 bitmask, u8 bitvalues)
+{
+ int err = 0;
+
+ if (bank >= AB5500_NUM_BANKS)
+ return -EINVAL;
+
+ if (bitmask) {
+ u8 buf;
+
+ err = mutex_lock_interruptible(&ab->access_mutex);
+ if (err)
+ return err;
+
+ if (bitmask == 0xFF) /* No need to read in this case. */
+ buf = bitvalues;
+ else { /* Read and modify the register value. */
+ err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr,
+ reg, &buf, 1);
+ if (err)
+ return err;
+
+ buf = ((~bitmask & buf) | (bitmask & bitvalues));
+ }
+ /* Write the new value. */
+ err = db5500_prcmu_abb_write(bankinfo[bank].slave_addr, reg,
+ &buf, 1);
+
+ mutex_unlock(&ab->access_mutex);
+ }
+ return err;
+}
+
+static int
+set_register_interruptible(struct ab5500 *ab, u8 bank, u8 reg, u8 value)
+{
+ return mask_and_set_register_interruptible(ab, bank, reg, 0xff, value);
+}
+
+/*
+ * Read/write permission checking functions.
+ */
+static const struct ab5500_i2c_ranges *get_bankref(u8 devid, u8 bank)
+{
+ u8 i;
+
+ if (devid < AB5500_NUM_DEVICES) {
+ for (i = 0; i < ab5500_bank_ranges[devid].nbanks; i++) {
+ if (ab5500_bank_ranges[devid].bank[i].bankid == bank)
+ return &ab5500_bank_ranges[devid].bank[i];
+ }
+ }
+ return NULL;
+}
+
+static bool page_write_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg)
+{
+ u8 i; /* range loop index */
+ const struct ab5500_i2c_ranges *bankref;
+
+ bankref = get_bankref(devid, bank);
+ if (bankref == NULL || last_reg < first_reg)
+ return false;
+
+ for (i = 0; i < bankref->nranges; i++) {
+ if (first_reg < bankref->range[i].first)
+ break;
+ if ((last_reg <= bankref->range[i].last) &&
+ (bankref->range[i].perm & AB5500_PERM_WR))
+ return true;
+ }
+ return false;
+}
+
+static bool reg_write_allowed(u8 devid, u8 bank, u8 reg)
+{
+ return page_write_allowed(devid, bank, reg, reg);
+}
+
+static bool page_read_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg)
+{
+ u8 i;
+ const struct ab5500_i2c_ranges *bankref;
+
+ bankref = get_bankref(devid, bank);
+ if (bankref == NULL || last_reg < first_reg)
+ return false;
+
+
+ /* Find the range (if it exists in the list) that includes first_reg. */
+ for (i = 0; i < bankref->nranges; i++) {
+ if (first_reg < bankref->range[i].first)
+ return false;
+ if (first_reg <= bankref->range[i].last)
+ break;
+ }
+ /* Make sure that the entire range up to and including last_reg is
+ * readable. This may span several of the ranges in the list.
+ */
+ while ((i < bankref->nranges) &&
+ (bankref->range[i].perm & AB5500_PERM_RD)) {
+ if (last_reg <= bankref->range[i].last)
+ return true;
+ if ((++i >= bankref->nranges) ||
+ (bankref->range[i].first !=
+ (bankref->range[i - 1].last + 1))) {
+ break;
+ }
+ }
+ return false;
+}
+
+static bool reg_read_allowed(u8 devid, u8 bank, u8 reg)
+{
+ return page_read_allowed(devid, bank, reg, reg);
+}
+
+
+/*
+ * The exported register access functionality.
+ */
+static int ab5500_get_chip_id(struct device *dev)
+{
+ struct ab5500 *ab = dev_get_drvdata(dev->parent);
+
+ return (int)ab->chip_id;
+}
+
+static int ab5500_mask_and_set_register_interruptible(struct device *dev,
+ u8 bank, u8 reg, u8 bitmask, u8 bitvalues)
+{
+ struct ab5500 *ab;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if ((AB5500_NUM_BANKS <= bank) ||
+ !reg_write_allowed(pdev->id, bank, reg))
+ return -EINVAL;
+
+ ab = dev_get_drvdata(dev->parent);
+ return mask_and_set_register_interruptible(ab, bank, reg,
+ bitmask, bitvalues);
+}
+
+static int ab5500_set_register_interruptible(struct device *dev, u8 bank,
+ u8 reg, u8 value)
+{
+ return ab5500_mask_and_set_register_interruptible(dev, bank, reg, 0xFF,
+ value);
+}
+
+static int ab5500_get_register_interruptible(struct device *dev, u8 bank,
+ u8 reg, u8 *value)
+{
+ struct ab5500 *ab;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if ((AB5500_NUM_BANKS <= bank) ||
+ !reg_read_allowed(pdev->id, bank, reg))
+ return -EINVAL;
+
+ ab = dev_get_drvdata(dev->parent);
+ return get_register_interruptible(ab, bank, reg, value);
+}
+
+static int ab5500_get_register_page_interruptible(struct device *dev, u8 bank,
+ u8 first_reg, u8 *regvals, u8 numregs)
+{
+ struct ab5500 *ab;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if ((AB5500_NUM_BANKS <= bank) ||
+ !page_read_allowed(pdev->id, bank,
+ first_reg, (first_reg + numregs - 1)))
+ return -EINVAL;
+
+ ab = dev_get_drvdata(dev->parent);
+ return get_register_page_interruptible(ab, bank, first_reg, regvals,
+ numregs);
+}
+
+static int
+ab5500_event_registers_startup_state_get(struct device *dev, u8 *event)
+{
+ struct ab5500 *ab;
+
+ ab = dev_get_drvdata(dev->parent);
+ if (!ab->startup_events_read)
+ return -EAGAIN; /* Try again later */
+
+ memcpy(event, ab->startup_events, AB5500_NUM_EVENT_REG);
+ return 0;
+}
+
+static struct abx500_ops ab5500_ops = {
+ .get_chip_id = ab5500_get_chip_id,
+ .get_register = ab5500_get_register_interruptible,
+ .set_register = ab5500_set_register_interruptible,
+ .get_register_page = ab5500_get_register_page_interruptible,
+ .set_register_page = NULL,
+ .mask_and_set_register = ab5500_mask_and_set_register_interruptible,
+ .event_registers_startup_state_get =
+ ab5500_event_registers_startup_state_get,
+ .startup_irq_enabled = NULL,
+};
+
+#ifdef CONFIG_DEBUG_FS
+static struct ab5500_i2c_ranges ab5500_reg_ranges[AB5500_NUM_BANKS] = {
+ [AB5500_BANK_LED] = {
+ .bankid = AB5500_BANK_LED,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x0C,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_ADC] = {
+ .bankid = AB5500_BANK_ADC,
+ .nranges = 6,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x1F,
+ .last = 0x22,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x23,
+ .last = 0x24,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x26,
+ .last = 0x2D,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x2F,
+ .last = 0x34,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x37,
+ .last = 0x57,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x58,
+ .last = 0x58,
+ .perm = AB5500_PERM_RO,
+ },
+ },
+ },
+ [AB5500_BANK_RTC] = {
+ .bankid = AB5500_BANK_RTC,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x04,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x06,
+ .last = 0x0C,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_STARTUP] = {
+ .bankid = AB5500_BANK_STARTUP,
+ .nranges = 12,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x01,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x1F,
+ .last = 0x1F,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x2E,
+ .last = 0x2E,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x2F,
+ .last = 0x30,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x50,
+ .last = 0x51,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x60,
+ .last = 0x61,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x66,
+ .last = 0x8A,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x8C,
+ .last = 0x96,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xAA,
+ .last = 0xB4,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xB7,
+ .last = 0xBF,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xC1,
+ .last = 0xCA,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xD3,
+ .last = 0xE0,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_DBI_ECI] = {
+ .bankid = AB5500_BANK_DBI_ECI,
+ .nranges = 3,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x07,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x10,
+ .last = 0x10,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x13,
+ .last = 0x13,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_CHG] = {
+ .bankid = AB5500_BANK_CHG,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x11,
+ .last = 0x11,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x12,
+ .last = 0x1B,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_FG_BATTCOM_ACC] = {
+ .bankid = AB5500_BANK_FG_BATTCOM_ACC,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x0B,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x0C,
+ .last = 0x10,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_USB] = {
+ .bankid = AB5500_BANK_USB,
+ .nranges = 12,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x01,
+ .last = 0x01,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x80,
+ .last = 0x83,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x87,
+ .last = 0x8A,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x8B,
+ .last = 0x8B,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x91,
+ .last = 0x92,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x93,
+ .last = 0x93,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x94,
+ .last = 0x94,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xA8,
+ .last = 0xB0,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xB2,
+ .last = 0xB2,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xB4,
+ .last = 0xBC,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xBF,
+ .last = 0xBF,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xC1,
+ .last = 0xC5,
+ .perm = AB5500_PERM_RO,
+ },
+ },
+ },
+ [AB5500_BANK_IT] = {
+ .bankid = AB5500_BANK_IT,
+ .nranges = 4,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x02,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x20,
+ .last = 0x36,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x40,
+ .last = 0x56,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x60,
+ .last = 0x76,
+ .perm = AB5500_PERM_RO,
+ },
+ },
+ },
+ [AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = {
+ .bankid = AB5500_BANK_VDDDIG_IO_I2C_CLK_TST,
+ .nranges = 7,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x02,
+ .last = 0x02,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x12,
+ .last = 0x12,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x30,
+ .last = 0x34,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x40,
+ .last = 0x44,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x50,
+ .last = 0x54,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x60,
+ .last = 0x64,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x70,
+ .last = 0x74,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = {
+ .bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
+ .nranges = 13,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x01,
+ .last = 0x01,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x02,
+ .last = 0x02,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x0D,
+ .last = 0x0F,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x1C,
+ .last = 0x1C,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x1E,
+ .last = 0x1E,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x20,
+ .last = 0x21,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x25,
+ .last = 0x25,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x28,
+ .last = 0x2A,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x30,
+ .last = 0x33,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x40,
+ .last = 0x43,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x50,
+ .last = 0x53,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x60,
+ .last = 0x63,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x70,
+ .last = 0x73,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_VIBRA] = {
+ .bankid = AB5500_BANK_VIBRA,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x10,
+ .last = 0x13,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xFE,
+ .last = 0xFE,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_AUDIO_HEADSETUSB] = {
+ .bankid = AB5500_BANK_AUDIO_HEADSETUSB,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x48,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xEB,
+ .last = 0xFB,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_SIM_USBSIM] = {
+ .bankid = AB5500_BANK_SIM_USBSIM,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x13,
+ .last = 0x19,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_VDENC] = {
+ .bankid = AB5500_BANK_VDENC,
+ .nranges = 12,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x08,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x09,
+ .last = 0x09,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x0A,
+ .last = 0x12,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x15,
+ .last = 0x19,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x1B,
+ .last = 0x21,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x27,
+ .last = 0x2C,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x41,
+ .last = 0x41,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x45,
+ .last = 0x5B,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x5D,
+ .last = 0x5D,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x69,
+ .last = 0x69,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x6C,
+ .last = 0x6D,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x80,
+ .last = 0x81,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+};
+static int ab5500_registers_print(struct seq_file *s, void *p)
+{
+ struct ab5500 *ab = s->private;
+ unsigned int i;
+ u8 bank = (u8)ab->debug_bank;
+
+ seq_printf(s, "ab5500 register values:\n");
+ for (bank = 0; bank < AB5500_NUM_BANKS; bank++) {
+ seq_printf(s, " bank %u, %s (0x%x):\n", bank,
+ bankinfo[bank].name,
+ bankinfo[bank].slave_addr);
+ for (i = 0; i < ab5500_reg_ranges[bank].nranges; i++) {
+ u8 reg;
+ int err;
+
+ for (reg = ab5500_reg_ranges[bank].range[i].first;
+ reg <= ab5500_reg_ranges[bank].range[i].last;
+ reg++) {
+ u8 value;
+
+ err = get_register_interruptible(ab, bank, reg,
+ &value);
+ if (err < 0) {
+ dev_err(ab->dev, "get_reg failed %d"
+ "bank 0x%x reg 0x%x\n",
+ err, bank, reg);
+ return err;
+ }
+
+ err = seq_printf(s, "[%d/0x%02X]: 0x%02X\n",
+ bank, reg, value);
+ if (err < 0) {
+ dev_err(ab->dev,
+ "seq_printf overflow\n");
+ /*
+ * Error is not returned here since
+ * the output is wanted in any case
+ */
+ return 0;
+ }
+ }
+ }
+ }
+ return 0;
+}
+
+static int ab5500_registers_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab5500_registers_print, inode->i_private);
+}
+
+static const struct file_operations ab5500_registers_fops = {
+ .open = ab5500_registers_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab5500_bank_print(struct seq_file *s, void *p)
+{
+ struct ab5500 *ab = s->private;
+
+ seq_printf(s, "%d\n", ab->debug_bank);
+ return 0;
+}
+
+static int ab5500_bank_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab5500_bank_print, inode->i_private);
+}
+
+static ssize_t ab5500_bank_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
+ char buf[32];
+ int buf_size;
+ unsigned long user_bank;
+ int err;
+
+ /* Get userspace string and assure termination */
+ buf_size = min(count, (sizeof(buf) - 1));
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ buf[buf_size] = 0;
+
+ err = strict_strtoul(buf, 0, &user_bank);
+ if (err)
+ return -EINVAL;
+
+ if (user_bank >= AB5500_NUM_BANKS) {
+ dev_err(ab->dev,
+ "debugfs error input > number of banks\n");
+ return -EINVAL;
+ }
+
+ ab->debug_bank = user_bank;
+
+ return buf_size;
+}
+
+static int ab5500_address_print(struct seq_file *s, void *p)
+{
+ struct ab5500 *ab = s->private;
+
+ seq_printf(s, "0x%02X\n", ab->debug_address);
+ return 0;
+}
+
+static int ab5500_address_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab5500_address_print, inode->i_private);
+}
+
+static ssize_t ab5500_address_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
+ char buf[32];
+ int buf_size;
+ unsigned long user_address;
+ int err;
+
+ /* Get userspace string and assure termination */
+ buf_size = min(count, (sizeof(buf) - 1));
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ buf[buf_size] = 0;
+
+ err = strict_strtoul(buf, 0, &user_address);
+ if (err)
+ return -EINVAL;
+ if (user_address > 0xff) {
+ dev_err(ab->dev,
+ "debugfs error input > 0xff\n");
+ return -EINVAL;
+ }
+ ab->debug_address = user_address;
+ return buf_size;
+}
+
+static int ab5500_val_print(struct seq_file *s, void *p)
+{
+ struct ab5500 *ab = s->private;
+ int err;
+ u8 regvalue;
+
+ err = get_register_interruptible(ab, (u8)ab->debug_bank,
+ (u8)ab->debug_address, &regvalue);
+ if (err) {
+ dev_err(ab->dev, "get_reg failed %d, bank 0x%x"
+ ", reg 0x%x\n", err, ab->debug_bank,
+ ab->debug_address);
+ return -EINVAL;
+ }
+ seq_printf(s, "0x%02X\n", regvalue);
+
+ return 0;
+}
+
+static int ab5500_val_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab5500_val_print, inode->i_private);
+}
+
+static ssize_t ab5500_val_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
+ char buf[32];
+ int buf_size;
+ unsigned long user_val;
+ int err;
+ u8 regvalue;
+
+ /* Get userspace string and assure termination */
+ buf_size = min(count, (sizeof(buf)-1));
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ buf[buf_size] = 0;
+
+ err = strict_strtoul(buf, 0, &user_val);
+ if (err)
+ return -EINVAL;
+ if (user_val > 0xff) {
+ dev_err(ab->dev,
+ "debugfs error input > 0xff\n");
+ return -EINVAL;
+ }
+ err = mask_and_set_register_interruptible(
+ ab, (u8)ab->debug_bank,
+ (u8)ab->debug_address, 0xFF, (u8)user_val);
+ if (err)
+ return -EINVAL;
+
+ get_register_interruptible(ab, (u8)ab->debug_bank,
+ (u8)ab->debug_address, &regvalue);
+ if (err)
+ return -EINVAL;
+
+ return buf_size;
+}
+
+static const struct file_operations ab5500_bank_fops = {
+ .open = ab5500_bank_open,
+ .write = ab5500_bank_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static const struct file_operations ab5500_address_fops = {
+ .open = ab5500_address_open,
+ .write = ab5500_address_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static const struct file_operations ab5500_val_fops = {
+ .open = ab5500_val_open,
+ .write = ab5500_val_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static struct dentry *ab5500_dir;
+static struct dentry *ab5500_reg_file;
+static struct dentry *ab5500_bank_file;
+static struct dentry *ab5500_address_file;
+static struct dentry *ab5500_val_file;
+
+static inline void ab5500_setup_debugfs(struct ab5500 *ab)
+{
+ ab->debug_bank = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP;
+ ab->debug_address = AB5500_CHIP_ID;
+
+ ab5500_dir = debugfs_create_dir("ab5500", NULL);
+ if (!ab5500_dir)
+ goto exit_no_debugfs;
+
+ ab5500_reg_file = debugfs_create_file("all-bank-registers",
+ S_IRUGO, ab5500_dir, ab, &ab5500_registers_fops);
+ if (!ab5500_reg_file)
+ goto exit_destroy_dir;
+
+ ab5500_bank_file = debugfs_create_file("register-bank",
+ (S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_bank_fops);
+ if (!ab5500_bank_file)
+ goto exit_destroy_reg;
+
+ ab5500_address_file = debugfs_create_file("register-address",
+ (S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_address_fops);
+ if (!ab5500_address_file)
+ goto exit_destroy_bank;
+
+ ab5500_val_file = debugfs_create_file("register-value",
+ (S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_val_fops);
+ if (!ab5500_val_file)
+ goto exit_destroy_address;
+
+ return;
+
+exit_destroy_address:
+ debugfs_remove(ab5500_address_file);
+exit_destroy_bank:
+ debugfs_remove(ab5500_bank_file);
+exit_destroy_reg:
+ debugfs_remove(ab5500_reg_file);
+exit_destroy_dir:
+ debugfs_remove(ab5500_dir);
+exit_no_debugfs:
+ dev_err(ab->dev, "failed to create debugfs entries.\n");
+ return;
+}
+
+static inline void ab5500_remove_debugfs(void)
+{
+ debugfs_remove(ab5500_val_file);
+ debugfs_remove(ab5500_address_file);
+ debugfs_remove(ab5500_bank_file);
+ debugfs_remove(ab5500_reg_file);
+ debugfs_remove(ab5500_dir);
+}
+
+#else /* !CONFIG_DEBUG_FS */
+static inline void ab5500_setup_debugfs(struct ab5500 *ab)
+{
+}
+static inline void ab5500_remove_debugfs(void)
+{
+}
+#endif
+
+/*
+ * ab5500_setup : Basic set-up, datastructure creation/destruction
+ * and I2C interface.This sets up a default config
+ * in the AB5500 chip so that it will work as expected.
+ * @ab : Pointer to ab5500 structure
+ * @settings : Pointer to struct abx500_init_settings
+ * @size : Size of init data
+ */
+static int __init ab5500_setup(struct ab5500 *ab,
+ struct abx500_init_settings *settings, unsigned int size)
+{
+ int err = 0;
+ int i;
+
+ for (i = 0; i < size; i++) {
+ err = mask_and_set_register_interruptible(ab,
+ settings[i].bank,
+ settings[i].reg,
+ 0xFF, settings[i].setting);
+ if (err)
+ goto exit_no_setup;
+
+ /* If event mask register update the event mask in ab5500 */
+ if ((settings[i].bank == AB5500_BANK_IT) &&
+ (AB5500_MASK_BASE <= settings[i].reg) &&
+ (settings[i].reg <= AB5500_MASK_END)) {
+ ab->mask[settings[i].reg - AB5500_MASK_BASE] =
+ settings[i].setting;
+ }
+ }
+exit_no_setup:
+ return err;
+}
+
+struct ab_family_id {
+ u8 id;
+ char *name;
+};
+
+static const struct ab_family_id ids[] __initdata = {
+ /* AB5500 */
+ {
+ .id = AB5500_1_0,
+ .name = "1.0"
+ },
+ {
+ .id = AB5500_1_1,
+ .name = "1.1"
+ },
+ /* Terminator */
+ {
+ .id = 0x00,
+ }
+};
+
+static int __init ab5500_probe(struct platform_device *pdev)
+{
+ struct ab5500 *ab;
+ struct ab5500_platform_data *ab5500_plf_data =
+ pdev->dev.platform_data;
+ int err;
+ int i;
+
+ ab = kzalloc(sizeof(struct ab5500), GFP_KERNEL);
+ if (!ab) {
+ dev_err(&pdev->dev,
+ "could not allocate ab5500 device\n");
+ return -ENOMEM;
+ }
+
+ /* Initialize data structure */
+ mutex_init(&ab->access_mutex);
+ mutex_init(&ab->irq_lock);
+ ab->dev = &pdev->dev;
+
+ platform_set_drvdata(pdev, ab);
+
+ /* Read chip ID register */
+ err = get_register_interruptible(ab, AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
+ AB5500_CHIP_ID, &ab->chip_id);
+ if (err) {
+ dev_err(&pdev->dev, "could not communicate with the analog "
+ "baseband chip\n");
+ goto exit_no_detect;
+ }
+
+ for (i = 0; ids[i].id != 0x0; i++) {
+ if (ids[i].id == ab->chip_id) {
+ snprintf(&ab->chip_name[0], sizeof(ab->chip_name) - 1,
+ "AB5500 %s", ids[i].name);
+ break;
+ }
+ }
+ if (ids[i].id == 0x0) {
+ dev_err(&pdev->dev, "unknown analog baseband chip id: 0x%x\n",
+ ab->chip_id);
+ dev_err(&pdev->dev, "driver not started!\n");
+ goto exit_no_detect;
+ }
+
+ /* Clear and mask all interrupts */
+ for (i = 0; i < AB5500_NUM_IRQ_REGS; i++) {
+ u8 latchreg = AB5500_IT_LATCH0_REG + i;
+ u8 maskreg = AB5500_IT_MASK0_REG + i;
+ u8 val;
+
+ get_register_interruptible(ab, AB5500_BANK_IT, latchreg, &val);
+ set_register_interruptible(ab, AB5500_BANK_IT, maskreg, 0xff);
+ ab->mask[i] = ab->oldmask[i] = 0xff;
+ }
+
+ err = abx500_register_ops(&pdev->dev, &ab5500_ops);
+ if (err) {
+ dev_err(&pdev->dev, "ab5500_register ops error\n");
+ goto exit_no_detect;
+ }
+
+ /* Set up and register the platform devices. */
+ for (i = 0; i < AB5500_NUM_DEVICES; i++) {
+ ab5500_devs[i].platform_data = ab5500_plf_data->dev_data[i];
+ ab5500_devs[i].pdata_size =
+ sizeof(ab5500_plf_data->dev_data[i]);
+ }
+
+ err = mfd_add_devices(&pdev->dev, 0, ab5500_devs,
+ ARRAY_SIZE(ab5500_devs), NULL,
+ ab5500_plf_data->irq.base);
+ if (err) {
+ dev_err(&pdev->dev, "ab5500_mfd_add_device error\n");
+ goto exit_no_detect;
+ }
+
+ err = ab5500_setup(ab, ab5500_plf_data->init_settings,
+ ab5500_plf_data->init_settings_sz);
+ if (err) {
+ dev_err(&pdev->dev, "ab5500_setup error\n");
+ goto exit_no_detect;
+ }
+
+ ab5500_setup_debugfs(ab);
+
+ dev_info(&pdev->dev, "detected AB chip: %s\n", &ab->chip_name[0]);
+ return 0;
+
+exit_no_detect:
+ kfree(ab);
+ return err;
+}
+
+static int __exit ab5500_remove(struct platform_device *pdev)
+{
+ struct ab5500 *ab = platform_get_drvdata(pdev);
+
+ ab5500_remove_debugfs();
+ mfd_remove_devices(&pdev->dev);
+ kfree(ab);
+ return 0;
+}
+
+static struct platform_driver ab5500_driver = {
+ .driver = {
+ .name = "ab5500-core",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(ab5500_remove),
+};
+
+static int __init ab5500_core_init(void)
+{
+ return platform_driver_probe(&ab5500_driver, ab5500_probe);
+}
+
+static void __exit ab5500_core_exit(void)
+{
+ platform_driver_unregister(&ab5500_driver);
+}
+
+subsys_initcall(ab5500_core_init);
+module_exit(ab5500_core_exit);
+
+MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
+MODULE_DESCRIPTION("AB5500 core driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/ab5500/ab5500.h b/include/linux/mfd/ab5500/ab5500.h
new file mode 100644
index 0000000..a720051
--- /dev/null
+++ b/include/linux/mfd/ab5500/ab5500.h
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) ST-Ericsson 2011
+ *
+ * License Terms: GNU General Public License v2
+ */
+#ifndef MFD_AB5500_H
+#define MFD_AB5500_H
+
+#include <linux/device.h>
+
+enum ab5500_devid {
+ AB5500_DEVID_ADC,
+ AB5500_DEVID_LEDS,
+ AB5500_DEVID_POWER,
+ AB5500_DEVID_REGULATORS,
+ AB5500_DEVID_SIM,
+ AB5500_DEVID_RTC,
+ AB5500_DEVID_CHARGER,
+ AB5500_DEVID_FUELGAUGE,
+ AB5500_DEVID_VIBRATOR,
+ AB5500_DEVID_CODEC,
+ AB5500_DEVID_USB,
+ AB5500_DEVID_OTP,
+ AB5500_DEVID_VIDEO,
+ AB5500_DEVID_DBIECI,
+ AB5500_DEVID_ONSWA,
+ AB5500_NUM_DEVICES,
+};
+
+enum ab5500_banks {
+ AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP = 0,
+ AB5500_BANK_VDDDIG_IO_I2C_CLK_TST = 1,
+ AB5500_BANK_VDENC = 2,
+ AB5500_BANK_SIM_USBSIM = 3,
+ AB5500_BANK_LED = 4,
+ AB5500_BANK_ADC = 5,
+ AB5500_BANK_RTC = 6,
+ AB5500_BANK_STARTUP = 7,
+ AB5500_BANK_DBI_ECI = 8,
+ AB5500_BANK_CHG = 9,
+ AB5500_BANK_FG_BATTCOM_ACC = 10,
+ AB5500_BANK_USB = 11,
+ AB5500_BANK_IT = 12,
+ AB5500_BANK_VIBRA = 13,
+ AB5500_BANK_AUDIO_HEADSETUSB = 14,
+ AB5500_NUM_BANKS = 15,
+};
+
+enum ab5500_banks_addr {
+ AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP = 0x4A,
+ AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST = 0x4B,
+ AB5500_ADDR_VDENC = 0x06,
+ AB5500_ADDR_SIM_USBSIM = 0x04,
+ AB5500_ADDR_LED = 0x10,
+ AB5500_ADDR_ADC = 0x0A,
+ AB5500_ADDR_RTC = 0x0F,
+ AB5500_ADDR_STARTUP = 0x03,
+ AB5500_ADDR_DBI_ECI = 0x07,
+ AB5500_ADDR_CHG = 0x0B,
+ AB5500_ADDR_FG_BATTCOM_ACC = 0x0C,
+ AB5500_ADDR_USB = 0x05,
+ AB5500_ADDR_IT = 0x0E,
+ AB5500_ADDR_VIBRA = 0x02,
+ AB5500_ADDR_AUDIO_HEADSETUSB = 0x0D,
+};
+
+/*
+ * Interrupt register offsets
+ * Bank : 0x0E
+ */
+#define AB5500_IT_SOURCE0_REG 0x20
+#define AB5500_IT_SOURCE1_REG 0x21
+#define AB5500_IT_SOURCE2_REG 0x22
+#define AB5500_IT_SOURCE3_REG 0x23
+#define AB5500_IT_SOURCE4_REG 0x24
+#define AB5500_IT_SOURCE5_REG 0x25
+#define AB5500_IT_SOURCE6_REG 0x26
+#define AB5500_IT_SOURCE7_REG 0x27
+#define AB5500_IT_SOURCE8_REG 0x28
+#define AB5500_IT_SOURCE9_REG 0x29
+#define AB5500_IT_SOURCE10_REG 0x2A
+#define AB5500_IT_SOURCE11_REG 0x2B
+#define AB5500_IT_SOURCE12_REG 0x2C
+#define AB5500_IT_SOURCE13_REG 0x2D
+#define AB5500_IT_SOURCE14_REG 0x2E
+#define AB5500_IT_SOURCE15_REG 0x2F
+#define AB5500_IT_SOURCE16_REG 0x30
+#define AB5500_IT_SOURCE17_REG 0x31
+#define AB5500_IT_SOURCE18_REG 0x32
+#define AB5500_IT_SOURCE19_REG 0x33
+#define AB5500_IT_SOURCE20_REG 0x34
+#define AB5500_IT_SOURCE21_REG 0x35
+#define AB5500_IT_SOURCE22_REG 0x36
+#define AB5500_IT_SOURCE23_REG 0x37
+
+#define AB5500_NUM_IRQ_REGS 23
+
+/**
+ * struct ab5500
+ * @access_mutex: lock out concurrent accesses to the AB registers
+ * @dev: a pointer to the device struct for this chip driver
+ * @ab5500_irq: the analog baseband irq
+ * @irq_base: the platform configuration irq base for subdevices
+ * @chip_name: name of this chip variant
+ * @chip_id: 8 bit chip ID for this chip variant
+ * @irq_lock: a lock to protect the mask
+ * @abb_events: a local bit mask of the prcmu wakeup events
+ * @event_mask: a local copy of the mask event registers
+ * @last_event_mask: a copy of the last event_mask written to hardware
+ * @startup_events: a copy of the first reading of the event registers
+ * @startup_events_read: whether the first events have been read
+ */
+struct ab5500 {
+ struct mutex access_mutex;
+ struct device *dev;
+ unsigned int ab5500_irq;
+ unsigned int irq_base;
+ char chip_name[32];
+ u8 chip_id;
+ struct mutex irq_lock;
+ u32 abb_events;
+ u8 mask[AB5500_NUM_IRQ_REGS];
+ u8 oldmask[AB5500_NUM_IRQ_REGS];
+ u8 startup_events[AB5500_NUM_IRQ_REGS];
+ bool startup_events_read;
+#ifdef CONFIG_DEBUG_FS
+ unsigned int debug_bank;
+ unsigned int debug_address;
+#endif
+};
+
+struct ab5500_platform_data {
+ struct {unsigned int base; unsigned int count; } irq;
+ void *dev_data[AB5500_NUM_DEVICES];
+ struct abx500_init_settings *init_settings;
+ unsigned int init_settings_sz;
+ bool pm_power_off;
+};
+
+#endif /* MFD_AB5500_H */
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index 896b5e4..79ec2c7 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -31,8 +31,8 @@
#define AB3100_R2B 0xc8
#define AB3550_P1A 0x10
#define AB5500_1_0 0x20
-#define AB5500_2_0 0x21
-#define AB5500_2_1 0x22
+#define AB5500_1_1 0x21
+#define AB5500_2_0 0x24

/* AB8500 CIDs*/
#define AB8500_CUTEARLY 0x00
--
1.7.4.3


\
 
 \ /
  Last update: 2011-06-09 13:25    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site