lkml.org 
[lkml]   [2011]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
DateMon, 6 Jun 2011 14:39:30 +0530
SubjectSeeing DMAR errors after multiple load/unload with SR-IOV
Frompadmanabh ratnakar <>
Hi,
I am using linux kernel 2.6.39. I have a IBM x3650 M3 system.
I have used following boot options -
intel_iommu=on iommu=pt

I was loading/unloading my NIC driver(be2net) with num_vfs=7.

After some iterations I get following DMAR errors -
Jun 4 03:50:20 rhel6 kernel: Uhhuh. NMI received for unknown reason
2d on CPU 0.
Jun 4 03:50:20 rhel6 kernel: Do you have a strange power saving mode enabled?
Jun 4 03:50:20 rhel6 kernel: Dazed and confused, but trying to continue
Jun 4 03:50:20 rhel6 kernel: DRHD: handling fault status reg 2
Jun 4 03:50:20 rhel6 kernel: DMAR:[DMA Read] Request device [1a:00.2]
fault addr 78077000
Jun 4 03:50:20 rhel6 kernel: DMAR:[fault reason 02] Present bit in
context entry is clear

I was trying to debug this. I dont understand iommu code much.
The physical address belongs the printed PCI function and there should
not have been an error.

I am unable to see pci_dev(pdev) of VFs getting removed from
si_domain->devices list(intel-iommu.c)
when driver gets unloaded calling pci_disable_sriov() freeing VF pdevs.
Looks like issue happens when when freed pdev is allocated again and
as it is already in list,
required initializations dont happen.

I dont know if my understanding is correct. Can anyone point me to
what the issue may be?

Thanks,
Padmanabh


\
 
 \ /
  Last update: 2011-06-06 11:11    [from the cache]
©2003-2010