lkml.org 
[lkml]   [2011]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: kernel panic in spi_complete() on spitz (PXA270)
On 06/30/11 17:45, Stanislav Brabec wrote:

> Marek Vasut wrote:
>> On Thursday, June 23, 2011 06:09:40 PM Stanislav Brabec wrote:
>>> Hallo.
>>>
>>> These Oops and kernel panic were observed on a Zaurus (spitz) machine
>>> (ARMv5, PXA270).
>> Looks similar to "Re: [PATCH v2] Input: Make ADS7846 independent on regulator"
> I don't see any trace in that thread. But yes, I was testing your patch
> from this thread. Without it, ADS7846 does not work on spitz (ADS7846
> does not have any dedicated regulator there). I want to
> add .needs_regulator bool to ads7846.c and send the patch again to the
> list.

Please, don't...
I thought we've finished discussing the regulator issue...

Instead of patching the driver and the platform data and the board file,
you should do _either_ of the following:
1) add regulator definition for ads7846 into the board file
2) enable the CONFIG_REGULATOR_DUMMY in your kernel configuration
3) use regulator_use_dummy_regulator() call in the board file.

Using either of the above, you will not need the patch for ads7846, only for the board file.


--
Regards,
Igor.



\
 
 \ /
  Last update: 2011-06-30 17:29    [W:0.057 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site