lkml.org 
[lkml]   [2011]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v5] misc: adds support the FSA9480 USB Switch
From
As i don't know much about this driver so just commenting on coding
style.

On Wed, Jun 29, 2011 at 7:14 PM, Donggeun Kim <dg77.kim@samsung.com> wrote:
> The FSA9480 is a USB port accessory detector and switch.
> This patch adds support the FSA9480 USB Switch.
>
> Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
>
> --
> v5:
>  remove compiler error message due to the wrong header file location
> v4:
>  move header file to include/linux/platform_data
>  change write permission for sysfs node
> v3:
>  add sysfs document
>  update the licence
>  remove export symbol (will update)
> v2:
>  use the threaded irq
>  fix the sysfs
>
> Resending after no comments for three months.
> ---
>  .../ABI/testing/sysfs-bus-i2c-devices-fsa9480      |   21 +
>  drivers/misc/Kconfig                               |    9 +
>  drivers/misc/Makefile                              |    1 +
>  drivers/misc/fsa9480.c                             |  557 ++++++++++++++++++++
>  include/linux/platform_data/fsa9480.h              |   27 +
>  5 files changed, 615 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480
>  create mode 100644 drivers/misc/fsa9480.c
>  create mode 100644 include/linux/platform_data/fsa9480.h
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480 b/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480
> new file mode 100644
> index 0000000..9de269b
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480
> @@ -0,0 +1,21 @@
> +What:          /sys/bus/i2c/devices/.../device
> +Date:          February 2011
> +Contact:       Minkyu Kang <mk7.kang@samsung.com>
> +Description:
> +               show what device is attached
> +               NONE - no device
> +               USB - USB device is attached
> +               UART - UART is attached
> +               CHARGER - Charger is attaced
> +               JIG - JIG is attached
> +
> +What:          /sys/bus/i2c/devices/.../switch
> +Date:          February 2011
> +Contact:       Minkyu Kang <mk7.kang@samsung.com>
> +Description:
> +               show or set the state of manual switch
> +               VAUDIO - switch to VAUDIO path
> +               UART - switch to UART path
> +               AUDIO - switch to AUDIO path
> +               DHOST - switch to DHOST path
> +               AUTO - switch automatically by device
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index 4e349cd..393ecfd 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -490,6 +490,15 @@ config PCH_PHUB
>          To compile this driver as a module, choose M here: the module will
>          be called pch_phub.
>
> +config USB_SWITCH_FSA9480
> +       tristate "FSA9480 USB Switch"
> +       depends on I2C
> +       help
> +         The FSA9480 is a USB port accessory detector and switch.
> +         The FSA9480 is fully controlled using I2C and enables USB data,
> +         stereo and mono audio, video, microphone and UART data to use
> +         a common connector port.
> +
>  source "drivers/misc/c2port/Kconfig"
>  source "drivers/misc/eeprom/Kconfig"
>  source "drivers/misc/cb710/Kconfig"
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index 5f03172..3328215 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -46,3 +46,4 @@ obj-y                         += ti-st/
>  obj-$(CONFIG_AB8500_PWM)       += ab8500-pwm.o
>  obj-y                          += lis3lv02d/
>  obj-y                          += carma/
> +obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
> diff --git a/drivers/misc/fsa9480.c b/drivers/misc/fsa9480.c
> new file mode 100644
> index 0000000..5d4b660
> --- /dev/null
> +++ b/drivers/misc/fsa9480.c
> @@ -0,0 +1,557 @@
> +/*
> + * fsa9480.c - FSA9480 micro USB switch device driver
> + *
> + * Copyright (C) 2010 Samsung Electronics
> + * Minkyu Kang <mk7.kang@samsung.com>
> + * Wonguk Jeong <wonguk.jeong@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/platform_data/fsa9480.h>
> +#include <linux/irq.h>
> +#include <linux/interrupt.h>
> +#include <linux/workqueue.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/pm_runtime.h>
> +
> +/* FSA9480 I2C registers */
> +#define FSA9480_REG_DEVID              0x01
> +#define FSA9480_REG_CTRL               0x02
> +#define FSA9480_REG_INT1               0x03
> +#define FSA9480_REG_INT2               0x04
> +#define FSA9480_REG_INT1_MASK          0x05
> +#define FSA9480_REG_INT2_MASK          0x06
> +#define FSA9480_REG_ADC                        0x07
> +#define FSA9480_REG_TIMING1            0x08
> +#define FSA9480_REG_TIMING2            0x09
> +#define FSA9480_REG_DEV_T1             0x0a
> +#define FSA9480_REG_DEV_T2             0x0b
> +#define FSA9480_REG_BTN1               0x0c
> +#define FSA9480_REG_BTN2               0x0d
> +#define FSA9480_REG_CK                 0x0e
> +#define FSA9480_REG_CK_INT1            0x0f
> +#define FSA9480_REG_CK_INT2            0x10
> +#define FSA9480_REG_CK_INTMASK1                0x11
> +#define FSA9480_REG_CK_INTMASK2                0x12
> +#define FSA9480_REG_MANSW1             0x13
> +#define FSA9480_REG_MANSW2             0x14
> +
> +/* Control */
> +#define CON_SWITCH_OPEN                (1 << 4)
> +#define CON_RAW_DATA           (1 << 3)
> +#define CON_MANUAL_SW          (1 << 2)
> +#define CON_WAIT               (1 << 1)
> +#define CON_INT_MASK           (1 << 0)
> +#define CON_MASK               (CON_SWITCH_OPEN | CON_RAW_DATA | \
> +                               CON_MANUAL_SW | CON_WAIT)
> +
> +/* Device Type 1 */
> +#define DEV_USB_OTG            (1 << 7)
> +#define DEV_DEDICATED_CHG      (1 << 6)
> +#define DEV_USB_CHG            (1 << 5)
> +#define DEV_CAR_KIT            (1 << 4)
> +#define DEV_UART               (1 << 3)
> +#define DEV_USB                        (1 << 2)
> +#define DEV_AUDIO_2            (1 << 1)
> +#define DEV_AUDIO_1            (1 << 0)
> +
> +#define DEV_T1_USB_MASK                (DEV_USB_OTG | DEV_USB)
> +#define DEV_T1_UART_MASK       (DEV_UART)
> +#define DEV_T1_CHARGER_MASK    (DEV_DEDICATED_CHG | DEV_USB_CHG)
> +
> +/* Device Type 2 */
> +#define DEV_AV                 (1 << 6)
> +#define DEV_TTY                        (1 << 5)
> +#define DEV_PPD                        (1 << 4)
> +#define DEV_JIG_UART_OFF       (1 << 3)
> +#define DEV_JIG_UART_ON                (1 << 2)
> +#define DEV_JIG_USB_OFF                (1 << 1)
> +#define DEV_JIG_USB_ON         (1 << 0)
> +
> +#define DEV_T2_USB_MASK                (DEV_JIG_USB_OFF | DEV_JIG_USB_ON)
> +#define DEV_T2_UART_MASK       (DEV_JIG_UART_OFF | DEV_JIG_UART_ON)
> +#define DEV_T2_JIG_MASK                (DEV_JIG_USB_OFF | DEV_JIG_USB_ON | \
> +                               DEV_JIG_UART_OFF | DEV_JIG_UART_ON)
> +
> +/*
> + * Manual Switch
> + * D- [7:5] / D+ [4:2]
> + * 000: Open all / 001: USB / 010: AUDIO / 011: UART / 100: V_AUDIO
> + */
> +#define SW_VAUDIO              ((4 << 5) | (4 << 2))
> +#define SW_UART                        ((3 << 5) | (3 << 2))
> +#define SW_AUDIO               ((2 << 5) | (2 << 2))
> +#define SW_DHOST               ((1 << 5) | (1 << 2))
> +#define SW_AUTO                        ((0 << 5) | (0 << 2))
> +
> +/* Interrupt 1 */
> +#define INT_DETACH             (1 << 1)
> +#define INT_ATTACH             (1 << 0)
> +
> +struct fsa9480_usbsw {
> +       struct i2c_client               *client;
> +       struct fsa9480_platform_data    *pdata;
> +       int                             dev1;
> +       int                             dev2;
> +       int                             mansw;
> +};
> +
> +static struct fsa9480_usbsw *chip;
> +
> +static int fsa9480_write_reg(struct i2c_client *client,
> +               int reg, int value)
> +{
> +       int ret;
> +
> +       ret = i2c_smbus_write_byte_data(client, reg, value);
> +
> +       if (ret < 0)
> +               dev_err(&client->dev, "%s: err %d\n", __func__, ret);
> +
> +       return ret;
> +}
> +
> +static int fsa9480_read_reg(struct i2c_client *client, int reg)
> +{
> +       int ret;
> +
> +       ret = i2c_smbus_read_byte_data(client, reg);
> +
> +       if (ret < 0)
> +               dev_err(&client->dev, "%s: err %d\n", __func__, ret);
> +
> +       return ret;
> +}
> +
> +static int fsa9480_read_irq(struct i2c_client *client, int *value)
> +{
> +       int ret;
> +
> +       ret = i2c_smbus_read_i2c_block_data(client,
> +                       FSA9480_REG_INT1, 2, (u8 *)value);
> +       *value &= 0xffff;
For my knowledge can you tell me why is this required?
> +
> +       if (ret < 0)
> +               dev_err(&client->dev, "%s: err %d\n", __func__, ret);
> +
> +       return ret;
If we are not checking this return value,why are we taking
pain to return this?
> +}
> +
> +void fsa9480_set_switch(const char *buf)
> +{
> +       struct fsa9480_usbsw *usbsw = chip;
> +       struct i2c_client *client = usbsw->client;
> +       unsigned int value;
> +       unsigned int path = 0;
> +
> +       value = fsa9480_read_reg(client, FSA9480_REG_CTRL);
> +
> +       if (!strncmp(buf, "VAUDIO", 6)) {
> +               path = SW_VAUDIO;
> +               value &= ~CON_MANUAL_SW;
> +       } else if (!strncmp(buf, "UART", 4)) {
> +               path = SW_UART;
> +               value &= ~CON_MANUAL_SW;
> +       } else if (!strncmp(buf, "AUDIO", 5)) {
> +               path = SW_AUDIO;
> +               value &= ~CON_MANUAL_SW;
> +       } else if (!strncmp(buf, "DHOST", 5)) {
> +               path = SW_DHOST;
> +               value &= ~CON_MANUAL_SW;
> +       } else if (!strncmp(buf, "AUTO", 4)) {
> +               path = SW_AUTO;
> +               value |= CON_MANUAL_SW;
> +       } else {
> +               printk(KERN_ERR "Wrong command\n");
> +               return;
IMHO,this looks not good.I think you should send return value
and check return value from this function.Anyway if choose
not to do so,it would be ok as you are printing KERN_ERR.
> +       }
> +
> +       usbsw->mansw = path;
> +       fsa9480_write_reg(client, FSA9480_REG_MANSW1, path);
> +       fsa9480_write_reg(client, FSA9480_REG_CTRL, value);
> +}
> +
> +ssize_t fsa9480_get_switch(char *buf)
> +{
> +       struct fsa9480_usbsw *usbsw = chip;
> +       struct i2c_client *client = usbsw->client;
> +       unsigned int value;
> +
> +       value = fsa9480_read_reg(client, FSA9480_REG_MANSW1);
> +
> +       if (value == SW_VAUDIO)
> +               return sprintf(buf, "VAUDIO\n");
> +       else if (value == SW_UART)
> +               return sprintf(buf, "UART\n");
> +       else if (value == SW_AUDIO)
> +               return sprintf(buf, "AUDIO\n");
> +       else if (value == SW_DHOST)
> +               return sprintf(buf, "DHOST\n");
> +       else if (value == SW_AUTO)
> +               return sprintf(buf, "AUTO\n");
> +       else
> +               return sprintf(buf, "%x", value);
switch case?
> +}
> +
> +static ssize_t fsa9480_show_device(struct device *dev,
> +                                  struct device_attribute *attr,
> +                                  char *buf)
> +{
> +       struct fsa9480_usbsw *usbsw = dev_get_drvdata(dev);
> +       struct i2c_client *client = usbsw->client;
> +       int dev1, dev2;
> +
> +       dev1 = fsa9480_read_reg(client, FSA9480_REG_DEV_T1);
> +       dev2 = fsa9480_read_reg(client, FSA9480_REG_DEV_T2);
shouldn't we initialize dev1 and dev2?As below condition then only
would make sense right?
> +
> +       if (!dev1 && !dev2)
> +               return sprintf(buf, "NONE\n");
> +
> +       /* USB */
> +       if (dev1 & DEV_T1_USB_MASK || dev2 & DEV_T2_USB_MASK)
> +               return sprintf(buf, "USB\n");
> +
> +       /* UART */
> +       if (dev1 & DEV_T1_UART_MASK || dev2 & DEV_T2_UART_MASK)
> +               return sprintf(buf, "UART\n");
> +
> +       /* CHARGER */
> +       if (dev1 & DEV_T1_CHARGER_MASK)
> +               return sprintf(buf, "CHARGER\n");
> +
> +       /* JIG */
> +       if (dev2 & DEV_T2_JIG_MASK)
> +               return sprintf(buf, "JIG\n");
> +
> +       return sprintf(buf, "UNKNOWN\n");
> +}
> +
> +static ssize_t fsa9480_show_manualsw(struct device *dev,
> +               struct device_attribute *attr, char *buf)
> +{
> +       return fsa9480_get_switch(buf);
> +
> +}
> +
> +static ssize_t fsa9480_set_manualsw(struct device *dev,
> +                                   struct device_attribute *attr,
> +                                   const char *buf, size_t count)
> +{
> +       fsa9480_set_switch(buf);
> +
> +       return count;
> +}
> +
> +static DEVICE_ATTR(device, S_IRUGO, fsa9480_show_device, NULL);
> +static DEVICE_ATTR(switch, S_IRUGO | S_IWUSR,
> +               fsa9480_show_manualsw, fsa9480_set_manualsw);
> +
> +static struct attribute *fsa9480_attributes[] = {
> +       &dev_attr_device.attr,
> +       &dev_attr_switch.attr,
> +       NULL
> +};
> +
> +static const struct attribute_group fsa9480_group = {
> +       .attrs = fsa9480_attributes,
> +};
> +
> +static void fsa9480_detect_dev(struct fsa9480_usbsw *usbsw, int intr)
> +{
> +       int val1, val2, ctrl;
> +       struct fsa9480_platform_data *pdata = usbsw->pdata;
> +       struct i2c_client *client = usbsw->client;
> +
> +       val1 = fsa9480_read_reg(client, FSA9480_REG_DEV_T1);
> +       val2 = fsa9480_read_reg(client, FSA9480_REG_DEV_T2);
> +       ctrl = fsa9480_read_reg(client, FSA9480_REG_CTRL);
> +
> +       dev_info(&client->dev, "intr: 0x%x, dev1: 0x%x, dev2: 0x%x\n",
> +                       intr, val1, val2);
> +
> +       if (!intr)
> +               goto out;
> +
> +       if (intr & INT_ATTACH) {        /* Attached */
> +               /* USB */
> +               if (val1 & DEV_T1_USB_MASK || val2 & DEV_T2_USB_MASK) {
> +                       if (pdata->usb_cb)
> +                               pdata->usb_cb(FSA9480_ATTACHED);
> +
> +                       if (usbsw->mansw) {
> +                               fsa9480_write_reg(client,
> +                                       FSA9480_REG_MANSW1, usbsw->mansw);
> +                       }
> +               }
> +
> +               /* UART */
> +               if (val1 & DEV_T1_UART_MASK || val2 & DEV_T2_UART_MASK) {
> +                       if (pdata->uart_cb)
> +                               pdata->uart_cb(FSA9480_ATTACHED);
> +
> +                       if (!(ctrl & CON_MANUAL_SW)) {
> +                               fsa9480_write_reg(client,
> +                                       FSA9480_REG_MANSW1, SW_UART);
> +                       }
> +               }
> +
> +               /* CHARGER */
> +               if (val1 & DEV_T1_CHARGER_MASK) {
> +                       if (pdata->charger_cb)
> +                               pdata->charger_cb(FSA9480_ATTACHED);
> +               }
> +
> +               /* JIG */
> +               if (val2 & DEV_T2_JIG_MASK) {
> +                       if (pdata->jig_cb)
> +                               pdata->jig_cb(FSA9480_ATTACHED);
> +               }
> +       } else if (intr & INT_DETACH) { /* Detached */
> +               /* USB */
> +               if (usbsw->dev1 & DEV_T1_USB_MASK ||
> +                       usbsw->dev2 & DEV_T2_USB_MASK) {
> +                       if (pdata->usb_cb)
> +                               pdata->usb_cb(FSA9480_DETACHED);
> +               }
> +
> +               /* UART */
> +               if (usbsw->dev1 & DEV_T1_UART_MASK ||
> +                       usbsw->dev2 & DEV_T2_UART_MASK) {
> +                       if (pdata->uart_cb)
> +                               pdata->uart_cb(FSA9480_DETACHED);
> +               }
> +
> +               /* CHARGER */
> +               if (usbsw->dev1 & DEV_T1_CHARGER_MASK) {
> +                       if (pdata->charger_cb)
> +                               pdata->charger_cb(FSA9480_DETACHED);
> +               }
> +
> +               /* JIG */
> +               if (usbsw->dev2 & DEV_T2_JIG_MASK) {
> +                       if (pdata->jig_cb)
> +                               pdata->jig_cb(FSA9480_DETACHED);
> +               }
> +       }
> +
> +       usbsw->dev1 = val1;
> +       usbsw->dev2 = val2;
> +
> +out:
> +       ctrl &= ~CON_INT_MASK;
> +       fsa9480_write_reg(client, FSA9480_REG_CTRL, ctrl);
> +}
> +
> +static irqreturn_t fsa9480_irq_handler(int irq, void *data)
> +{
> +       struct fsa9480_usbsw *usbsw = data;
> +       struct i2c_client *client = usbsw->client;
> +       int intr;
> +
> +       /* clear interrupt */
> +       fsa9480_read_irq(client, &intr);
> +
> +       /* device detection */
> +       fsa9480_detect_dev(usbsw, intr);
> +
> +       return IRQ_HANDLED;
> +}
> +
> +static int fsa9480_irq_init(struct fsa9480_usbsw *usbsw)
> +{
> +       struct fsa9480_platform_data *pdata = usbsw->pdata;
> +       struct i2c_client *client = usbsw->client;
> +       int ret;
shouldn't ret be initialized?
> +       int intr;
> +       unsigned int ctrl = CON_MASK;
> +
> +       /* clear interrupt */
> +       fsa9480_read_irq(client, &intr);
> +
> +       /* unmask interrupt (attach/detach only) */
> +       fsa9480_write_reg(client, FSA9480_REG_INT1_MASK, 0xfc);
> +       fsa9480_write_reg(client, FSA9480_REG_INT2_MASK, 0x1f);
> +
> +       usbsw->mansw = fsa9480_read_reg(client, FSA9480_REG_MANSW1);
> +
> +       if (usbsw->mansw)
> +               ctrl &= ~CON_MANUAL_SW; /* Manual Switching Mode */
> +
> +       fsa9480_write_reg(client, FSA9480_REG_CTRL, ctrl);
> +
> +       if (pdata && pdata->cfg_gpio)
> +               pdata->cfg_gpio();
> +
> +       if (client->irq) {
> +               ret = request_threaded_irq(client->irq, NULL,
> +                               fsa9480_irq_handler,
> +                               IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> +                               "fsa9480 micro USB", usbsw);
> +               if (ret) {
> +                       dev_err(&client->dev, "failed to reqeust IRQ\n");
> +                       return ret;
> +               }
> +
> +               device_init_wakeup(&client->dev, pdata->wakeup);
> +       }
> +
> +       return 0;
> +}
> +
> +static int __devinit fsa9480_probe(struct i2c_client *client,
> +                        const struct i2c_device_id *id)
> +{
> +       struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
> +       struct fsa9480_usbsw *usbsw;
> +       int ret = 0;
> +
> +       if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
> +               return -EIO;
> +
> +       usbsw = kzalloc(sizeof(struct fsa9480_usbsw), GFP_KERNEL);
> +       if (!usbsw) {
> +               dev_err(&client->dev, "failed to allocate driver data\n");
> +               return -ENOMEM;
> +       }
> +
> +       usbsw->client = client;
> +       usbsw->pdata = client->dev.platform_data;
> +
> +       chip = usbsw;
> +
> +       i2c_set_clientdata(client, usbsw);
> +
> +       ret = fsa9480_irq_init(usbsw);
> +       if (ret)
> +               goto fail1;
> +
> +       ret = sysfs_create_group(&client->dev.kobj, &fsa9480_group);
> +       if (ret) {
> +               dev_err(&client->dev,
> +                               "failed to create fsa9480 attribute group\n");
> +               goto fail2;
> +       }
> +
> +       /* ADC Detect Time: 500ms */
> +       fsa9480_write_reg(client, FSA9480_REG_TIMING1, 0x6);
> +
> +       if (chip->pdata->reset_cb)
> +               chip->pdata->reset_cb();
> +
> +       /* device detection */
> +       fsa9480_detect_dev(usbsw, INT_ATTACH);
> +
> +       pm_runtime_set_active(&client->dev);
> +
> +       return 0;
> +
> +fail2:
> +       if (client->irq)
> +               free_irq(client->irq, NULL);
> +fail1:
> +       i2c_set_clientdata(client, NULL);
> +       kfree(usbsw);
> +       return ret;
> +}
> +
> +static int __devexit fsa9480_remove(struct i2c_client *client)
> +{
> +       struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client);
> +       if (client->irq)
> +               free_irq(client->irq, NULL);
> +       i2c_set_clientdata(client, NULL);
> +
> +       sysfs_remove_group(&client->dev.kobj, &fsa9480_group);
> +       device_init_wakeup(&client->dev, 0);
> +       kfree(usbsw);
> +       return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +
> +static int fsa9480_suspend(struct i2c_client *client, pm_message_t state)
> +{
> +       struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client);
> +       struct fsa9480_platform_data *pdata = usbsw->pdata;
> +
> +       if (device_may_wakeup(&client->dev) && client->irq)
> +               enable_irq_wake(client->irq);
> +
> +       if (pdata->usb_power)
> +               pdata->usb_power(0);
> +
> +       return 0;
> +}
> +
> +static int fsa9480_resume(struct i2c_client *client)
> +{
> +       struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client);
> +       int dev1, dev2;
i think it should be initialized.
> +
> +       if (device_may_wakeup(&client->dev) && client->irq)
> +               disable_irq_wake(client->irq);
> +
> +       /*
> +        * Clear Pending interrupt. Note that detect_dev does what
> +        * the interrupt handler does. So, we don't miss pending and
> +        * we reenable interrupt if there is one.
> +        */
> +       fsa9480_read_reg(client, FSA9480_REG_INT1);
> +       fsa9480_read_reg(client, FSA9480_REG_INT2);
> +
> +       dev1 = fsa9480_read_reg(client, FSA9480_REG_DEV_T1);
> +       dev2 = fsa9480_read_reg(client, FSA9480_REG_DEV_T2);
> +
> +       /* device detection */
> +       fsa9480_detect_dev(usbsw, (dev1 || dev2) ? INT_ATTACH : INT_DETACH);
> +
> +       return 0;
> +}
> +
> +#else
> +
> +#define fsa9480_suspend NULL
> +#define fsa9480_resume NULL
> +
> +#endif /* CONFIG_PM */
> +
> +static const struct i2c_device_id fsa9480_id[] = {
> +       {"fsa9480", 0},
> +       {}
> +};
> +MODULE_DEVICE_TABLE(i2c, fsa9480_id);
> +
> +static struct i2c_driver fsa9480_i2c_driver = {
> +       .driver = {
> +               .name = "fsa9480",
> +       },
> +       .probe = fsa9480_probe,
> +       .remove = __devexit_p(fsa9480_remove),
> +       .resume = fsa9480_resume,
> +       .suspend = fsa9480_suspend,
> +       .id_table = fsa9480_id,
> +};
> +
> +static int __init fsa9480_init(void)
> +{
> +       return i2c_add_driver(&fsa9480_i2c_driver);
> +}
> +module_init(fsa9480_init);
> +
> +static void __exit fsa9480_exit(void)
> +{
> +       i2c_del_driver(&fsa9480_i2c_driver);
> +}
> +module_exit(fsa9480_exit);
> +
> +MODULE_AUTHOR("Minkyu Kang <mk7.kang@samsung.com>");
> +MODULE_DESCRIPTION("FSA9480 USB Switch driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/platform_data/fsa9480.h b/include/linux/platform_data/fsa9480.h
> new file mode 100644
> index 0000000..72dddcb
> --- /dev/null
> +++ b/include/linux/platform_data/fsa9480.h
> @@ -0,0 +1,27 @@
> +/*
> + * Copyright (C) 2010 Samsung Electronics
> + * Minkyu Kang <mk7.kang@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef _FSA9480_H_
> +#define _FSA9480_H_
> +
> +#define FSA9480_ATTACHED       1
> +#define FSA9480_DETACHED       0
> +
> +struct fsa9480_platform_data {
> +       void (*cfg_gpio) (void);
> +       void (*usb_cb) (u8 attached);
> +       void (*uart_cb) (u8 attached);
> +       void (*charger_cb) (u8 attached);
> +       void (*jig_cb) (u8 attached);
> +       void (*reset_cb) (void);
> +       void (*usb_power) (u8 on);
> +       int wakeup;
> +};
> +
> +#endif /* _FSA9480_H_ */
> --
> 1.7.4.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2011-06-29 13:37    [W:0.072 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site