lkml.org 
[lkml]   [2011]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/1] HWMON: TMP102 - Added support for 12 bit data
On Wed, 22 Jun 2011 07:51:39 +0530, Ankur Patel wrote:
> From: Ankur Patel <ankur.patel@quipment.in>
>
> In the tmp102.ko driver support for 12 bit data is added. Also, the
> sysfs names are replaced with the actual chip supported fuctionality
> names.

Nack. These attribute names are standard, see
Documentation/hwmon/sysfs-interface. You don't get to change them.

What problem were you trying to solve? libsensors expects the attribute
names which are in use today.

>
> Signed-off-by: Ankur Patel <ankur.patel@quipment.in>
> ---
> drivers/hwmon/tmp102.c | 40 ++++++++++++++++++++++++++--------------
> 1 files changed, 26 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c
> index 5bd1949..a13b572 100644
> --- a/drivers/hwmon/tmp102.c
> +++ b/drivers/hwmon/tmp102.c
> @@ -47,6 +47,9 @@
> #define TMP102_TLOW_REG 0x02
> #define TMP102_THIGH_REG 0x03
>
> +#define TMP102_CONFIG (TMP102_CONF_TM | TMP102_CONF_EM | TMP102_CONF_CR1)
> +#define TMP102_CONFIG_RD_ONLY (TMP102_CONF_R0 | TMP102_CONF_R1 | TMP102_CONF_AL)
> +
> struct tmp102 {
> struct device *hwmon_dev;
> struct mutex lock;
> @@ -68,16 +71,26 @@ static inline int tmp102_write_reg(struct i2c_client *client, u8 reg, u16 val)
> return i2c_smbus_write_word_data(client, reg, swab16(val));
> }
>
> -/* convert left adjusted 13-bit TMP102 register value to milliCelsius */
> +/* convert left adjusted TMP102 register value to milliCelsius for 13 bit &
> + * 12 bit by dividing with 128 & 256 respectively*/
> static inline int tmp102_reg_to_mC(s16 val)
> {
> - return ((val & ~0x01) * 1000) / 128;
> + #if TMP102_CONFIG & TMP102_CONF_EM
> + return ((val & ~0x01) * 1000) / 128;
> + #else
> + return ((val & ~0x01) * 1000) / 256;
> + #endif
> }
>
> -/* convert milliCelsius to left adjusted 13-bit TMP102 register value */
> +/* convert milliCelsius to left adjusted TMP102 register value for 13 bit &
> + * 12 bit by multiplying with 128 & 256 respectivley*/
> static inline u16 tmp102_mC_to_reg(int val)
> {
> - return (val * 128) / 1000;
> + #if TMP102_CONFIG & TMP102_CONF_EM
> + return (val * 128) / 1000;
> + #else
> + return (val * 256) / 1000;
> + #endif
> }
>
> static const u8 tmp102_reg[] = {
> @@ -126,7 +139,9 @@ static ssize_t tmp102_set_temp(struct device *dev,
>
> if (strict_strtol(buf, 10, &val) < 0)
> return -EINVAL;
> - val = SENSORS_LIMIT(val, -256000, 255000);
> + /* It will limit the Input temperature range to -55 Deg. Cel to
> + * 150 Deg. Cel */
> + val = val = SENSORS_LIMIT(val, -55000, 150000);
>
> mutex_lock(&tmp102->lock);
> tmp102->temp[sda->index] = val;
> @@ -138,16 +153,16 @@ static ssize_t tmp102_set_temp(struct device *dev,
>
> static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, tmp102_show_temp, NULL , 0);
>
> -static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, tmp102_show_temp,
> - tmp102_set_temp, 1);
> +static SENSOR_DEVICE_ATTR(temp1_low_thresold, S_IWUSR | S_IRUGO,
> + tmp102_show_temp, tmp102_set_temp, 1);
>
> -static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, tmp102_show_temp,
> - tmp102_set_temp, 2);
> +static SENSOR_DEVICE_ATTR(temp1_max_thresold, S_IWUSR | S_IRUGO,
> +\ tmp102_show_temp, tmp102_set_temp, 2);
>
> static struct attribute *tmp102_attributes[] = {
> &sensor_dev_attr_temp1_input.dev_attr.attr,
> - &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
> - &sensor_dev_attr_temp1_max.dev_attr.attr,
> + &sensor_dev_attr_temp1_low_thresold.dev_attr.attr,
> + &sensor_dev_attr_temp1_max_thresold.dev_attr.attr,
> NULL
> };
>
> @@ -155,9 +170,6 @@ static const struct attribute_group tmp102_attr_group = {
> .attrs = tmp102_attributes,
> };
>
> -#define TMP102_CONFIG (TMP102_CONF_TM | TMP102_CONF_EM | TMP102_CONF_CR1)
> -#define TMP102_CONFIG_RD_ONLY (TMP102_CONF_R0 | TMP102_CONF_R1 | TMP102_CONF_AL)
> -
> static int __devinit tmp102_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {


--
Jean Delvare


\
 
 \ /
  Last update: 2011-06-23 10:09    [W:0.024 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site