lkml.org 
[lkml]   [2011]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ASoC: codecs: Max98095: Fix logging of hardware revision.
Date
The base hardware revision of the Maxim 98095 part is 0x40; the code
which outputs the revision of the hardware has been updated to
properly use uppercase alphabetic values for the revision numbers.

Also, the use of a constant for the length 'max98095_dai' has been
replaced with ARRAY_SIZE().

Signed-off-by: Taylor Hutt <thutt@chromium.org>
---
sound/soc/codecs/max98095.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/max98095.c b/sound/soc/codecs/max98095.c
index e1d282d..9a793b3 100644
--- a/sound/soc/codecs/max98095.c
+++ b/sound/soc/codecs/max98095.c
@@ -2261,11 +2261,11 @@ static int max98095_probe(struct snd_soc_codec *codec)

ret = snd_soc_read(codec, M98095_0FF_REV_ID);
if (ret < 0) {
- dev_err(codec->dev, "Failed to read device revision: %d\n",
+ dev_err(codec->dev, "Failure reading hardware revision: %d\n",
ret);
goto err_access;
}
- dev_info(codec->dev, "revision %c\n", ret + 'A');
+ dev_info(codec->dev, "Hardware revision: %c\n", ret - 0x40 + 'A');

snd_soc_write(codec, M98095_097_PWR_SYS, M98095_PWRSV);

@@ -2342,8 +2342,8 @@ static int max98095_i2c_probe(struct i2c_client *i2c,
max98095->control_data = i2c;
max98095->pdata = i2c->dev.platform_data;

- ret = snd_soc_register_codec(&i2c->dev,
- &soc_codec_dev_max98095, &max98095_dai[0], 3);
+ ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_max98095,
+ max98095_dai, ARRAY_SIZE(max98095_dai));
if (ret < 0)
kfree(max98095);
return ret;
--
1.7.3.1


\
 
 \ /
  Last update: 2011-06-20 20:57    [W:0.081 / U:0.880 seconds]
©2003-2014 Jasper Spaans. Advertise on this site