lkml.org 
[lkml]   [2011]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/8] xen/pci: Shuffle code around.
Date
That file is hard to read. Move the code around so that
the contents of it follows a uniform format:
- setup GSIs - PV, HVM, and initial domain case
- then MSI/MSI-x setup - PV, HVM and then initial domain case.
- then MSI/MSI-x teardown - same order.
- lastly, the __init functions in PV, HVM, and initial domain order.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
arch/x86/pci/xen.c | 343 ++++++++++++++++++++++++++--------------------------
1 files changed, 172 insertions(+), 171 deletions(-)
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index 8214724..a2a8e2e 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -19,6 +19,44 @@
#include <xen/events.h>
#include <asm/xen/pci.h>

+
+static int xen_pcifront_enable_irq(struct pci_dev *dev)
+{
+ int rc;
+ int share = 1;
+ int pirq;
+ u8 gsi;
+
+ rc = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &gsi);
+ if (rc < 0) {
+ dev_warn(&dev->dev, "Xen PCI: failed to read interrupt line: %d\n",
+ rc);
+ return rc;
+ }
+
+ rc = xen_allocate_pirq_gsi(gsi);
+ if (rc < 0) {
+ dev_warn(&dev->dev, "Xen PCI: failed to allocate a PIRQ for GSI%d: %d\n",
+ gsi, rc);
+ return rc;
+ }
+ pirq = rc;
+
+ if (gsi < NR_IRQS_LEGACY)
+ share = 0;
+
+ rc = xen_bind_pirq_gsi_to_irq(gsi, pirq, share, "pcifront");
+ if (rc < 0) {
+ dev_warn(&dev->dev, "Xen PCI: failed to bind GSI%d (PIRQ%d) to IRQ: %d\n",
+ gsi, pirq, rc);
+ return rc;
+ }
+
+ dev->irq = rc;
+ dev_info(&dev->dev, "Xen PCI mapped GSI%d to IRQ%d\n", gsi, dev->irq);
+ return 0;
+}
+
#ifdef CONFIG_ACPI
static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi,
int trigger, int polarity)
@@ -58,6 +96,85 @@ static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi,
}
#endif

+#ifdef CONFIG_XEN_DOM0
+static int xen_register_pirq(u32 gsi, int triggering)
+{
+ int rc, pirq, irq = -1;
+ struct physdev_map_pirq map_irq;
+ int shareable = 0;
+ char *name;
+
+ if (!xen_pv_domain())
+ return -1;
+
+ if (triggering == ACPI_EDGE_SENSITIVE) {
+ shareable = 0;
+ name = "ioapic-edge";
+ } else {
+ shareable = 1;
+ name = "ioapic-level";
+ }
+
+ pirq = xen_allocate_pirq_gsi(gsi);
+ if (pirq < 0)
+ goto out;
+
+ irq = xen_bind_pirq_gsi_to_irq(gsi, pirq, shareable, name);
+ if (irq < 0)
+ goto out;
+
+ printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d\n", pirq, irq);
+
+ map_irq.domid = DOMID_SELF;
+ map_irq.type = MAP_PIRQ_TYPE_GSI;
+ map_irq.index = gsi;
+ map_irq.pirq = pirq;
+
+ rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
+ if (rc) {
+ printk(KERN_WARNING "xen map irq failed %d\n", rc);
+ return -1;
+ }
+
+out:
+ return irq;
+}
+
+static int xen_register_gsi(u32 gsi, int triggering, int polarity)
+{
+ int rc, irq;
+ struct physdev_setup_gsi setup_gsi;
+
+ if (!xen_pv_domain())
+ return -1;
+
+ printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n",
+ gsi, triggering, polarity);
+
+ irq = xen_register_pirq(gsi, triggering);
+
+ setup_gsi.gsi = gsi;
+ setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1);
+ setup_gsi.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+
+ rc = HYPERVISOR_physdev_op(PHYSDEVOP_setup_gsi, &setup_gsi);
+ if (rc == -EEXIST)
+ printk(KERN_INFO "Already setup the GSI :%d\n", gsi);
+ else if (rc) {
+ printk(KERN_ERR "Failed to setup GSI :%d, err_code:%d\n",
+ gsi, rc);
+ }
+
+ return irq;
+}
+
+static int acpi_register_gsi_xen(struct device *dev, u32 gsi,
+ int trigger, int polarity)
+{
+ return xen_register_gsi(gsi, trigger, polarity);
+}
+#endif
+
#if defined(CONFIG_PCI_MSI)
#include <linux/msi.h>
#include <asm/msidef.h>
@@ -65,6 +182,46 @@ static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi,
struct xen_pci_frontend_ops *xen_pci_frontend;
EXPORT_SYMBOL_GPL(xen_pci_frontend);

+/*
+ * For MSI interrupts we have to use drivers/xen/event.s functions to
+ * allocate an irq_desc and setup the right */
+static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+ int irq, ret, i;
+ struct msi_desc *msidesc;
+ int *v;
+
+ v = kzalloc(sizeof(int) * max(1, nvec), GFP_KERNEL);
+ if (!v)
+ return -ENOMEM;
+
+ if (type == PCI_CAP_ID_MSIX)
+ ret = xen_pci_frontend_enable_msix(dev, v, nvec);
+ else
+ ret = xen_pci_frontend_enable_msi(dev, v);
+ if (ret)
+ goto error;
+ i = 0;
+ list_for_each_entry(msidesc, &dev->msi_list, list) {
+ irq = xen_bind_pirq_msi_to_irq(dev, msidesc, v[i], 0,
+ (type == PCI_CAP_ID_MSIX) ?
+ "pcifront-msi-x" :
+ "pcifront-msi",
+ DOMID_SELF);
+ if (irq < 0)
+ goto free;
+ i++;
+ }
+ kfree(v);
+ return 0;
+
+error:
+ dev_err(&dev->dev, "Xen PCI frontend has not registered MSI/MSI-X support!\n");
+free:
+ kfree(v);
+ return ret;
+}
+
#define XEN_PIRQ_MSI_DATA (MSI_DATA_TRIGGER_EDGE | \
MSI_DATA_LEVEL_ASSERT | (3 << 8) | MSI_DATA_VECTOR(0))

@@ -123,67 +280,6 @@ error:
return -ENODEV;
}

-/*
- * For MSI interrupts we have to use drivers/xen/event.s functions to
- * allocate an irq_desc and setup the right */
-
-
-static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
-{
- int irq, ret, i;
- struct msi_desc *msidesc;
- int *v;
-
- v = kzalloc(sizeof(int) * max(1, nvec), GFP_KERNEL);
- if (!v)
- return -ENOMEM;
-
- if (type == PCI_CAP_ID_MSIX)
- ret = xen_pci_frontend_enable_msix(dev, v, nvec);
- else
- ret = xen_pci_frontend_enable_msi(dev, v);
- if (ret)
- goto error;
- i = 0;
- list_for_each_entry(msidesc, &dev->msi_list, list) {
- irq = xen_bind_pirq_msi_to_irq(dev, msidesc, v[i], 0,
- (type == PCI_CAP_ID_MSIX) ?
- "pcifront-msi-x" :
- "pcifront-msi",
- DOMID_SELF);
- if (irq < 0)
- goto free;
- i++;
- }
- kfree(v);
- return 0;
-
-error:
- dev_err(&dev->dev, "Xen PCI frontend has not registered MSI/MSI-X support!\n");
-free:
- kfree(v);
- return ret;
-}
-
-static void xen_teardown_msi_irqs(struct pci_dev *dev)
-{
- struct msi_desc *msidesc;
-
- msidesc = list_entry(dev->msi_list.next, struct msi_desc, list);
- if (msidesc->msi_attrib.is_msix)
- xen_pci_frontend_disable_msix(dev);
- else
- xen_pci_frontend_disable_msi(dev);
-
- /* Free the IRQ's and the msidesc using the generic code. */
- default_teardown_msi_irqs(dev);
-}
-
-static void xen_teardown_msi_irq(unsigned int irq)
-{
- xen_destroy_irq(irq);
-}
-
#ifdef CONFIG_XEN_DOM0
static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
@@ -242,44 +338,28 @@ out:
return ret;
}
#endif
-#endif

-static int xen_pcifront_enable_irq(struct pci_dev *dev)
+static void xen_teardown_msi_irqs(struct pci_dev *dev)
{
- int rc;
- int share = 1;
- int pirq;
- u8 gsi;
+ struct msi_desc *msidesc;

- rc = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &gsi);
- if (rc < 0) {
- dev_warn(&dev->dev, "Xen PCI: failed to read interrupt line: %d\n",
- rc);
- return rc;
- }
+ msidesc = list_entry(dev->msi_list.next, struct msi_desc, list);
+ if (msidesc->msi_attrib.is_msix)
+ xen_pci_frontend_disable_msix(dev);
+ else
+ xen_pci_frontend_disable_msi(dev);

- rc = xen_allocate_pirq_gsi(gsi);
- if (rc < 0) {
- dev_warn(&dev->dev, "Xen PCI: failed to allocate a PIRQ for GSI%d: %d\n",
- gsi, rc);
- return rc;
- }
- pirq = rc;
+ /* Free the IRQ's and the msidesc using the generic code. */
+ default_teardown_msi_irqs(dev);
+}

- if (gsi < NR_IRQS_LEGACY)
- share = 0;
+static void xen_teardown_msi_irq(unsigned int irq)
+{
+ xen_destroy_irq(irq);
+}

- rc = xen_bind_pirq_gsi_to_irq(gsi, pirq, share, "pcifront");
- if (rc < 0) {
- dev_warn(&dev->dev, "Xen PCI: failed to bind GSI%d (PIRQ%d) to IRQ: %d\n",
- gsi, pirq, rc);
- return rc;
- }
+#endif

- dev->irq = rc;
- dev_info(&dev->dev, "Xen PCI mapped GSI%d to IRQ%d\n", gsi, dev->irq);
- return 0;
-}

int __init pci_xen_init(void)
{
@@ -327,77 +407,6 @@ int __init pci_xen_hvm_init(void)
}

#ifdef CONFIG_XEN_DOM0
-static int xen_register_pirq(u32 gsi, int triggering)
-{
- int rc, pirq, irq = -1;
- struct physdev_map_pirq map_irq;
- int shareable = 0;
- char *name;
-
- if (!xen_pv_domain())
- return -1;
-
- if (triggering == ACPI_EDGE_SENSITIVE) {
- shareable = 0;
- name = "ioapic-edge";
- } else {
- shareable = 1;
- name = "ioapic-level";
- }
-
- pirq = xen_allocate_pirq_gsi(gsi);
- if (pirq < 0)
- goto out;
-
- irq = xen_bind_pirq_gsi_to_irq(gsi, pirq, shareable, name);
- if (irq < 0)
- goto out;
-
- printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d\n", pirq, irq);
-
- map_irq.domid = DOMID_SELF;
- map_irq.type = MAP_PIRQ_TYPE_GSI;
- map_irq.index = gsi;
- map_irq.pirq = pirq;
-
- rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
- if (rc) {
- printk(KERN_WARNING "xen map irq failed %d\n", rc);
- return -1;
- }
-
-out:
- return irq;
-}
-
-static int xen_register_gsi(u32 gsi, int triggering, int polarity)
-{
- int rc, irq;
- struct physdev_setup_gsi setup_gsi;
-
- if (!xen_pv_domain())
- return -1;
-
- printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n",
- gsi, triggering, polarity);
-
- irq = xen_register_pirq(gsi, triggering);
-
- setup_gsi.gsi = gsi;
- setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1);
- setup_gsi.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
-
- rc = HYPERVISOR_physdev_op(PHYSDEVOP_setup_gsi, &setup_gsi);
- if (rc == -EEXIST)
- printk(KERN_INFO "Already setup the GSI :%d\n", gsi);
- else if (rc) {
- printk(KERN_ERR "Failed to setup GSI :%d, err_code:%d\n",
- gsi, rc);
- }
-
- return irq;
-}
-
static __init void xen_setup_acpi_sci(void)
{
int rc;
@@ -425,12 +434,6 @@ static __init void xen_setup_acpi_sci(void)
return;
}

-static int acpi_register_gsi_xen(struct device *dev, u32 gsi,
- int trigger, int polarity)
-{
- return xen_register_gsi(gsi, trigger, polarity);
-}
-
static int __init pci_xen_initial_domain(void)
{
#ifdef CONFIG_PCI_MSI
@@ -471,9 +474,7 @@ void __init xen_setup_pirqs(void)
trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE);
}
}
-#endif

-#ifdef CONFIG_XEN_DOM0
struct xen_device_domain_owner {
domid_t domain;
struct pci_dev *dev;
--
1.7.4.1


\
 
 \ /
  Last update: 2011-06-15 21:23    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site