lkml.org 
[lkml]   [2011]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] ahci: fix pmp softreset with HDD
Hello,

On Wed, Jun 15, 2011 at 06:04:12PM +0800, Yuan-Hsin Chen wrote:
> From: Yuan-Hsin Chen <yhchen@faraday-tech.com>
>
> When enabling both port multiplier and platform ahci sata,
> ahci times out while connecting to HDD directly. This is
> because soft reset fails with IPMS set. Do soft reset
> again to port 0.
>
> The soft reset sequence is copied from ahci.c.
>
> Signed-off-by: Yuan-Hsin Chen <yhchen@faraday-tech.com>

Getting closer.

> +config SATA_PMP_RST
> + bool "SATA PMP softreset"
> + depends on SATA_PMP
> + default n
> + help
> + When enabling both port multiplier and platform ahci sata,
> + ahci times out while connecting to HDD directly in some
> + ahci controller. This is because soft reset fails with
> + IPMS set. Do soft reset again to port 0.
> +

Hmmm... Is there any way to detect the specific controller from
ahci_platform.c? This is workaround for a controller bug. It should
be enabled automatically. Making it a config option doesn't make
whole lot of sense.

> @@ -1329,6 +1338,56 @@ static int ahci_softreset(struct ata_link *link, unsigned int *class,
> }
> EXPORT_SYMBOL_GPL(ahci_do_softreset);
>
> +static int ahci_pmp_check_ready(struct ata_link *link)
> +{
> + void __iomem *port_mmio = ahci_port_base(link->ap);
> + u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
> + u32 irq_status = readl(port_mmio + PORT_IRQ_STAT);
> +
> + /*
> + * There is no need to check TFDATA if BAD PMP is found due to HW bug,
> + * which can save timeout delay.
> + */
> + if (irq_status & PORT_IRQ_BAD_PMP)
> + return -EIO;
> +
> + printk("%s:TFT 0x%x\n", __func__, status);
> + return ata_check_ready(status);
> +}
> +
> +static int ahci_pmp_softreset(struct ata_link *link, unsigned int *class,
> + unsigned long deadline)
> +{
> + struct ata_port *ap = link->ap;
> + void __iomem *port_mmio = ahci_port_base(ap);
> + int pmp = sata_srst_pmp(link);
> + int rc;
> + u32 irq_sts;
> +
> + DPRINTK("ENTER\n");
> +
> + rc = ahci_do_softreset(link, class, pmp, deadline,
> + ahci_pmp_check_ready);
> +
> + /*
> + * Soft reset fails with IPMS set when PMP is enabled but
> + * SATA HDD/ODD is connected to SATA port, do soft reset
> + * again to port 0.
> + */
> + if (rc == -EIO) {
> + irq_sts = readl(port_mmio + PORT_IRQ_STAT);
> + if (irq_sts & PORT_IRQ_BAD_PMP) {
> + ata_link_printk(link, KERN_WARNING,
> + "applying PMP SRST workaround "
> + "and retrying\n");
> + rc = ahci_do_softreset(link, class, 0, deadline,
> + ahci_check_ready);
> + }
> + }
> +
> + return rc;
> +}

Please make two separate patches. One to rename & move sb600 ops to
libahci.c and another to use it for platform. There's no reason to
have two identical sets of functions doing the same thing.

Thanks.

--
tejun


\
 
 \ /
  Last update: 2011-06-15 12:17    [W:0.211 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site