lkml.org 
[lkml]   [2011]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/6] clocksource: xtensa: convert to clocksource_register_hz/khz
Date
From: John Stultz <johnstul@us.ibm.com>

This converts the xtensa clocksource to use clocksource_register_hz/khz

This is untested, so any assistance in testing would be appreciated!

CC: Chris Zankel <chris@zankel.net>
CC: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
---
arch/xtensa/kernel/time.c | 13 +------------
1 files changed, 1 insertions(+), 12 deletions(-)

diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index f3e5eb4..ac62f9c 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -41,14 +41,6 @@ static struct clocksource ccount_clocksource = {
.rating = 200,
.read = ccount_read,
.mask = CLOCKSOURCE_MASK(32),
- /*
- * With a shift of 22 the lower limit of the cpu clock is
- * 1MHz, where NSEC_PER_CCOUNT is 1000 or a bit less than
- * 2^10: Since we have 32 bits and the multiplicator can
- * already take up as much as 10 bits, this leaves us with
- * remaining upper 22 bits.
- */
- .shift = 22,
};

static irqreturn_t timer_interrupt(int irq, void *dev_id);
@@ -66,10 +58,7 @@ void __init time_init(void)
printk("%d.%02d MHz\n", (int)ccount_per_jiffy/(1000000/HZ),
(int)(ccount_per_jiffy/(10000/HZ))%100);
#endif
- ccount_clocksource.mult =
- clocksource_hz2mult(CCOUNT_PER_JIFFY * HZ,
- ccount_clocksource.shift);
- clocksource_register(&ccount_clocksource);
+ clocksource_register_hz(&ccount_clocksource, CCOUNT_PER_JIFFY * HZ);

/* Initialize the linux timer interrupt. */

--
1.7.3.2.146.gca209


\
 
 \ /
  Last update: 2011-06-01 09:37    [W:0.069 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site