lkml.org 
[lkml]   [2011]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 4/4] mfd: global Suspend and resume support of ehci and ohci
Date
On Wednesday, June 01, 2011, Keshava Munegowda wrote:
> From: Keshava Munegowda <Keshava_mgowda@ti.com>
>
> The global suspend and resume functions for usbhs core driver
> are implemented.These routine are called when the global suspend
> and resume occurs. Before calling these functions, the
> bus suspend and resume of ehci and ohci drivers are called
> from runtime pm.
>
> Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
> ---
> drivers/mfd/omap-usb-host.c | 103 +++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 103 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
> index 43de12a..32d19e2 100644
> --- a/drivers/mfd/omap-usb-host.c
> +++ b/drivers/mfd/omap-usb-host.c
> @@ -146,6 +146,10 @@
> #define is_ehci_hsic_mode(x) (x == OMAP_EHCI_PORT_MODE_HSIC)
>
>
> +/* USBHS state bits */
> +#define OMAP_USBHS_INIT 0
> +#define OMAP_USBHS_SUSPEND 4
> +
> struct usbhs_hcd_omap {
> struct clk *xclk60mhsp1_ck;
> struct clk *xclk60mhsp2_ck;
> @@ -165,6 +169,7 @@ struct usbhs_hcd_omap {
> u32 usbhs_rev;
> spinlock_t lock;
> int count;
> + unsigned long state;
> };
> /*-------------------------------------------------------------------------*/
>
> @@ -809,6 +814,8 @@ static int usbhs_enable(struct device *dev)
> (pdata->ehci_data->reset_gpio_port[1], 1);
> }
>
> + set_bit(OMAP_USBHS_INIT, &omap->state);
> +
> end_count:
> omap->count++;
> spin_unlock_irqrestore(&omap->lock, flags);
> @@ -897,6 +904,7 @@ static void usbhs_disable(struct device *dev)
> }
>
> pm_runtime_put_sync(dev);
> + clear_bit(OMAP_USBHS_INIT, &omap->state);
>
> /* The gpio_free migh sleep; so unlock the spinlock */
> spin_unlock_irqrestore(&omap->lock, flags);
> @@ -926,10 +934,105 @@ void omap_usbhs_disable(struct device *dev)
> }
> EXPORT_SYMBOL_GPL(omap_usbhs_disable);
>
> +#ifdef CONFIG_PM
> +
> +static int usbhs_resume(struct device *dev)
> +{
> + struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
> + struct usbhs_omap_platform_data *pdata = &omap->platdata;
> + unsigned long flags = 0;
> +
> + dev_dbg(dev, "Resuming TI HSUSB Controller\n");
> +
> + if (!pdata) {
> + dev_dbg(dev, "missing platform_data\n");
> + return -ENODEV;
> + }
> +
> + spin_lock_irqsave(&omap->lock, flags);
> +
> + if (!test_bit(OMAP_USBHS_INIT, &omap->state) ||
> + !test_bit(OMAP_USBHS_SUSPEND, &omap->state))
> + goto end_resume;
> +
> + pm_runtime_get_sync(dev);
> +
> + if (is_omap_usbhs_rev2(omap)) {
> + if (is_ehci_tll_mode(pdata->port_mode[0])) {
> + clk_enable(omap->usbhost_p1_fck);
> + clk_enable(omap->usbtll_p1_fck);
> + }
> + if (is_ehci_tll_mode(pdata->port_mode[1])) {
> + clk_enable(omap->usbhost_p2_fck);
> + clk_enable(omap->usbtll_p2_fck);
> + }
> + clk_enable(omap->utmi_p1_fck);
> + clk_enable(omap->utmi_p2_fck);
> + }
> + clear_bit(OMAP_USBHS_SUSPEND, &omap->state);
> +
> +end_resume:
> + spin_unlock_irqrestore(&omap->lock, flags);
> + return 0;
> +}
> +
> +
> +static int usbhs_suspend(struct device *dev)
> +{
> + struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
> + struct usbhs_omap_platform_data *pdata = &omap->platdata;
> + unsigned long flags = 0;
> +
> + dev_dbg(dev, "Suspending TI HSUSB Controller\n");
> +
> + if (!pdata) {
> + dev_dbg(dev, "missing platform_data\n");
> + return -ENODEV;
> + }
> +
> + spin_lock_irqsave(&omap->lock, flags);
> +
> + if (!test_bit(OMAP_USBHS_INIT, &omap->state) ||
> + test_bit(OMAP_USBHS_SUSPEND, &omap->state))
> + goto end_suspend;
> +
> + if (is_omap_usbhs_rev2(omap)) {
> + if (is_ehci_tll_mode(pdata->port_mode[0])) {
> + clk_disable(omap->usbhost_p1_fck);
> + clk_disable(omap->usbtll_p1_fck);
> + }
> + if (is_ehci_tll_mode(pdata->port_mode[1])) {
> + clk_disable(omap->usbhost_p2_fck);
> + clk_disable(omap->usbtll_p2_fck);
> + }
> + clk_disable(omap->utmi_p2_fck);
> + clk_disable(omap->utmi_p1_fck);
> + }
> +
> + set_bit(OMAP_USBHS_SUSPEND, &omap->state);
> + pm_runtime_put_sync(dev);
> +
> +end_suspend:
> + spin_unlock_irqrestore(&omap->lock, flags);
> + return 0;
> +}
> +
> +
> +static const struct dev_pm_ops usbhsomap_dev_pm_ops = {
> + .suspend = usbhs_suspend,
> + .resume = usbhs_resume,
> +};

Please add .freeze()/.thaw() and .poweroff()/.restore() callbacks too.
They may point to the same routines, but must be present.

You can actually use the SIMPLE_DEV_PM_OPS() convenience macro for this
purpose.

> +
> +#define USBHS_OMAP_DEV_PM_OPS (&usbhsomap_dev_pm_ops)
> +#else
> +#define USBHS_OMAP_DEV_PM_OPS NULL
> +#endif
> +
> static struct platform_driver usbhs_omap_driver = {
> .driver = {
> .name = (char *)usbhs_driver_name,
> .owner = THIS_MODULE,
> + .pm = USBHS_OMAP_DEV_PM_OPS,
> },
> .remove = __exit_p(usbhs_omap_remove),
> };
>

Thanks,
Rafael


\
 
 \ /
  Last update: 2011-06-01 15:57    [W:0.174 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site