lkml.org 
[lkml]   [2011]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 02/19] ARM: LPAE: add ISBs around MMU enabling code
From
Date
On Sun, 2011-05-08 at 22:41 +0100, Russell King - ARM Linux wrote:
> On Sun, May 08, 2011 at 01:51:21PM +0100, Catalin Marinas wrote:
> > From: Will Deacon <will.deacon@arm.com>
> >
> > Before we enable the MMU, we must ensure that the TTBR registers contain
> > sane values. After the MMU has been enabled, we jump to the *virtual*
> > address of the following function, so we also need to ensure that the
> > SCTLR write has taken effect.
> >
> > This patch adds ISB instructions around the SCTLR write to ensure the
> > visibility of the above.
>
> Maybe this should be extended to the arch/arm/kernel/sleep.S code too?

Yes.

> > __turn_mmu_on:
> > mov r0, r0
> > + instr_sync
> > mcr p15, 0, r0, c1, c0, 0 @ write control reg
> > mrc p15, 0, r3, c0, c0, 0 @ read id reg
> > + instr_sync
> > mov r3, r3
> > mov r3, r13
> > mov pc, r3
>
> Could we avoid the second isb by doing something like this instead:
>
> mrc p15, 0, r3, c0, c0, 0 @ read id reg
> and r3, r3, r13
> orr r3, r3, r13
> mov pc, r3
>
> The read from the ID register must complete before the branch can be
> taken as the value is involved in computing the address to jump to
> (even though that value has no actual effect on that address.) This
> assumes that the read from CP15 can't complete until the previous
> write has completed.

I'm not entirely sure this would work on all (future) implementations.
There may be a slight difference between completion vs visibility to
subsequent instructions.

The MMU enable bit status may be already sampled by instructions in the
pipeline. Even if the "mov pc, r3" waits (pipeline stalled) for the read
back from SCTLR, it may still consider the MMU as being disabled by
having sampled the corresponding bit earlier. That's why CP15 operations
changing translations etc. require ISB and A15 is more restrictive here
(or we could say more relaxed on when the CP15 operation have an
effect).

Alternatively an exception return would do as well (like movs pc, lr)
but I think we still add some code for setting up the SPSR.

> What I'm concerned about is adding additional code to this path - we
> know it has some strict alignment requirements on some CPUs which
> otherwise misbehave, normally by faulting in some way.

The code path would be only changed on ARMv6+, otherwise the macro is
empty. Have you seen any issues with changing this code on newer CPUs?

--
Catalin




\
 
 \ /
  Last update: 2011-05-09 12:25    [W:0.491 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site