lkml.org 
[lkml]   [2011]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: AMD C1E issue? 2.6.38.4
On 2011-05-07 18:21, Borislav Petkov wrote:
>> Saw these in my messages after enabling C1E on my new Jetway Mini-ITX board:
>>
>> # microcode_ctl -u
>> microcode_ctl: writing microcode (length: 430080)
>> microcode_ctl: error writing to '/dev/cpu/microcode' errno=22 (Invalid
>> argument)
>> microcode_ctl: there may be messages from the driver in your system log.
>>
>> microcode: AMD microcode update via /dev/cpu/microcode not supported
>> microcode: AMD microcode update via /dev/cpu/microcode not supported
>
> no, the message is correct - the AMD ucode driver doesn't support
> ucode loading method through the /dev node, only through the firmware
> loader. I.e., you should simply put the microcode image into
> /lib/firmware/amd-ucode/ and compile the kernel microcode driver as a
> module - then it'll load automatically.

Wel, yes/no.
It works that way on my other boxes.
On this specific box microcode_ctl is not activated automagically during
startup of the machine.

> This doesn't have anything to do with C1E.

OK, that helps. Thanks.

What else could be the cause of microcode_ctl not updating?
Situation is:
microcode: CPU0: patch_level=0x10000b7
microcode: CPU1: patch_level=0x10000b7
Is that new enough so that there is just no newer code to be uploaded
for AMD Athlon(tm) II X2 235e Processor ?

Udo


\
 
 \ /
  Last update: 2011-05-07 18:33    [W:0.050 / U:2.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site