Messages in this thread | | | Date | Thu, 05 May 2011 14:05:11 +0200 | From | jdossantos@docs ... | Subject | RE: Error in Hyper-V modules hv vmbus |
| |
On Wed, 4 May 2011 16:00:52 +0000, Hank Janssen wrote: >> -----Original Message----- >> From: jdossantos@docs.homelinux.org >> [mailto:jdossantos@docs.homelinux.org] >> Sent: Wednesday, May 04, 2011 2:48 AM >> To: Hank Janssen >> Cc: KY Srinivasan; linux-kernel@vger.kernel.org >> Subject: Re: Error in Hyper-V modules hv_vmbus >> > Hank. >> >> Here is my step by step protocol: > > Thanks for the detailed setup. I will be trying it with this. > >> lsmod | grep hv_ >> hv_timesource 1055 0 [permanent] >> hv_vmbus 48554 1 >> >> In the logs and with lsmod i see the timesource module running, but >> the >> time is not in sync with the windows host. >> Shutdown function also dosn't work, seems that nothing of the >> integrated components are working..hv_netvsc,hv_blkvsc,hv_storvsc >> are >> not >> loaded?! But modinfo provides information: > > Timesource makes sure that the clock does not drift and uses Hyper-V > for > Its stable time source. > > The setting of the clock equal to the host is provided by the > hv_utils.ko > Module. This module also provides heartbeat, shutdown and KVP > functionality. > > >> After that I enabled the synthetic network card, but also here..it >> doesn't work and I don't see any hv_netvsc >> module loaded, so I tried to load it "by hand" with modprobe >> hv_netvsc..but I get a modprobe timeout and nothing happens.. > > I should know more in the next day or so when I get a VM up and > running. > > It works fine on Ubuntu, I submitted a few patches to them a few > weeks ago > To fix some other problems (these patches are already in mainline) > > Hank. Hi Hank
Yes in ubuntu server (i tested the newest version 11.04) there is no problem, the hyper-v modules are compiled and activated as default in the released kernel (2.6.38-8), network, timesync and all others integrated components are working fine. This is the lsmod output: lsmod | grep hv_ hv_utils 12850 0 hv_netvsc 36467 0 hv_timesource 12423 0 [permanent] hv_vmbus 50431 2 hv_utils,hv_netvsc
Now I have downloaded the newest rc kernel and done the same steps like in the debian installation, after a reboot I get same errors and integrated components failed to works...Now I check the hyper-v modules source from 2.6.38-8 ubuntu kernel and the new one
Regards Juan Dos Santos
| |