lkml.org 
[lkml]   [2011]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 5/7] seccomp_filter: Document what seccomp_filter is and how it works.
From
On Mon, May 2, 2011 at 6:47 PM, Frederic Weisbecker <fweisbec@gmail.com> wrote:
> 2011/5/3 Frederic Weisbecker <fweisbec@gmail.com>:
>> On Fri, Apr 29, 2011 at 11:13:44AM -0500, Will Drewry wrote:
>>> That said, I have a general interface question :)  Right now I have:
>>> prctl(PR_SET_SECCOMP, 2, SECCOMP_FILTER_ADD, syscall_nr, filter_string);
>>> prctl(PR_SET_SECCOMP, 2, SECCOMP_FILTER_DROP, syscall_nr,
>>> filter_string_or_NULL);
>>> prctl(PR_SET_SECCOMP, 2, SECCOMP_FILTER_APPLY, apply_flags);
>>>   (I will change this to default to apply_on_exec and let FILTER_APPLY
>>> make it apply _now_ exclusively. :)
>>>
>>> This can easily be mapped to:
>>> prctl(PR_SET_SECCOMP
>>>        PR_SET_SECOMP_FILTER_ADD
>>>        PR_SET_SECOMP_FILTER_DROP
>>>        PR_SET_SECOMP_FILTER_APPLY
>>> if that'd be preferable (to keep it all in the prctl.h world).
>>>
>>> Following along the suggestion of reducing custom parsing, it seemed
>>> to make a lot of sense to make add and drop actions very explicit.
>>> There is no guesswork so a system call filtered process will only be
>>> able to perform DROP operations (if prctl is allowed) to reduce the
>>> allowed system calls.  This also allows more fine grained flexibility
>>> in addition to the in-kernel complexity reduction.  E.g.,
>>> Process starts with
>>>   __NR_read, "fd == 1"
>>>   __NR_read, "fd == 2"
>>> later it can call:
>>>   prctl(PR_SET_SECCOMP, 2, SECCOMP_FILTER_DROP, __NR_read, "fd == 2");
>>> to drop one of the filters without disabling "fd == 1" reading.  (Or
>>> it could pass in NULL to drop all filters).
>>
>> Hm, but then you don't let the childs be able to restrict further
>> what you allowed before.
>>
>> Say I have foo(int a, int b), and I apply these filters:
>>
>>        __NR_foo, "a == 1";
>>        __NR_foo, "a == 2";
>>
>> This is basically "a == 1 || a == 2".
>>
>> Now I apply the filters and I fork. How can the child
>> (or current task after the filter is applied) restrict
>> further by only allowing "b == 2", such that with the
>> inherited parent filters we have:
>>
>>        "(a == 1 || a == 2) && b == 2"
>>
>> So what you propose seems to me too limited. I'd rather have this:
>>
>> SECCOMP_FILTER_SET = remove previous filter entirely and set a new one
>> SECCOMP_FILTER_GET = get the string of the current filter
>>
>> The rule would be that you can only set a filter that is intersected
>> with the one that was previously applied.
>>
>> It means that if you set filter A and you apply it. If you want to set
>> filter B thereafter, it must be:
>>
>>        A && B
>>
>> OTOH, as long as you haven't applied A, you can override it as you wish.
>> Like you can have "A || B" instead. Or you can remove it with "1". Of course
>> if a previous filter was applied before A, then your new filter must be
>> concatenated: "previous && (A || B)".
>>
>> Right? And note in this scheme you can reproduce your DROP trick. If
>> "A || B" is the current filter applied, then you can restrict B by
>> doing: "(A || B) && A".
>>
>> So the role of SECCOMP_FILTER_GET is to get the string that matches
>> the current applied filter.
>>
>> The effect of this is infinite of course. If you apply A, then apply
>> B then you need A && B. If later you want to apply C, then you need
>> A && B && C, etc...
>>
>> Does that look sane?
>>
>
> Even better: applying a filter would always automatically be an
> intersection of the previous one.
>
> If you do:
>
> SECCOMP_FILTER_SET, __NR_foo, "a == 1 || a == 2"
> SECCOMP_FILTER_APPLY
> SECCOMP_FILTER_SET, __NR_foo, "b == 2"
> SECCOMP_FILTER_APPLY
> SECCOMP_FILTER_SET, __NR_foo, "c == 3"
> SECCOMP_FILTER_APPLY
>
> The end result is:
>
> "(a == 1 || a == 2) && b == 2  && c == 3"
>
> So that we don't push the burden in the kernel to compare the applied
> expression with a new one that may or may not be embraced by parenthesis
> and other trickies like that. We simply append to the working one.
>
> Ah and OTOH this:
>
> SECCOMP_FILTER_SET, __NR_foo, "a == 1 || a == 2"
> SECCOMP_FILTER_APPLY
> SECCOMP_FILTER_SET, __NR_foo, "b == 2"
> SECCOMP_FILTER_SET, __NR_foo, "c == 3"
>
> has the following end result:
>
> "(a == 1 || a == 2) && c == 3"
>
> As long as you don't apply the filter, the temporary part is
> overriden, but still we keep
> the applied part.
>
> Still sane? (or completely nuts?)

Okay - so I *think* I'm following. I really like the use of SET and
GET to allow for further constraint based on additional argument
restrictions instead of purely reducing the filters available. The
only part I'm stumbling on is using APPLY on a per-filter basis. In
my current implementation, I consider APPLY to be the global enable
bit. Whatever filters are set become set in stone and only &&s are
handled. I'm not sure I understand why it would make sense to do a
per-syscall-filter apply call. It's certainly doable, but it will
mean that we may be logically storing something like:

__NR_foo: (a == 1 || a == 2), applied
__NR_foo: b == 2, not applied
__NR_foo: c == 3, not applied

after

SECCOMP_FILTER_SET, __NR_foo, "a == 1 || a == 2"
SECCOMP_FILTER_APPLY
SECCOMP_FILTER_SET, __NR_foo, "b == 2"
SECCOMP_FILTER_SET, __NR_foo, "c == 3"

In that case, would a call to sys_foo even be tested against the
non-applied constraints of b==2 or c==3? Or would the call to set "c
== 3" replace the "b == 2" entry. I'm not sure I see that the benefit
exceeds the ambiguity that might introduce. However, if the default
behavior it to always extend with &&, then a consumer of the interface
could just do:

SECCOMP_FILTER_SET, __NR_prctl, "option == 2"
SECCOMP_FILTER_SET, __NR_foo, "a == 1 || a == 2"
SECCOMP_FILTER_SET, __NR_foo, "b == 2"
SECCOMP_FILTER_APPLY

This would yield a final filter for foo of "(a == 1 || a == 2) && b ==
2". The call to APPLY would initiate the enforcement of the syscall
filtering and enforce that no new filters may be added for syscalls
that aren't already constrained. So you could still call

SECCOMP_FILTER_SET, __NR_foo, "0"

which is logically "((a == 1 || a == 2) && b == 2) && 0" and would be
interpreted as just a DROP. But you could not do,

SECCOMP_FILTER_SET, __NR_foo, "0"
SECCOMP_FILTER_SET, __NR_foo, "1"
or
SECCOMP_FILTER_SET, __NR_read, "1"

(since the implicit filter for all syscalls after an APPLY call should
be "0" and additions would just be "0 && whatever").

Am I missing something? If that makes sense, then we may even be able
to reduce the extra directives by one and get a resulting interface
that looks something like:

/* Appends (&&) a new filter string for a syscall to the current
filter value. "0" clears the filter. */
prctl(PR_SET_SECCOMP_FILTER, syscall_nr, filter_string);
/* Returns the current explicit filter string for a syscall */
prctl(PR_GET_SECCOMP_FILTER, syscall_nr, buf, buflen);
/* Transition to a secure computing mode:
* 1 - enables traditional seccomp behavior
* 2 - enables seccomp filter enforcement and changes the implicit
filter for syscalls from "1" to "0"
*/
prctl(PR_SET_SECCOMP, mode);

I'll set aside the v2 of the patch that uses ADD, DROP, and APPLY and
work up a version with this interface. Do you (or anyone else :) feel
strongly about per-syscall APPLY? I like the above version, but I'm
certainly willing to explore the other path. As is, I'll go through
my usecases (and tests once I have a new cut of the patch) and see how
it feels. At first blush, this appears more succinct _and_ more
expressive than the prior versions!

~~

As to the use of apply_on_exec, even if you whitelist: mmap, fstat64,
brk, uname, open, read, close, set_thread_area, mprotect, munmap, and
access _just_ to allow a process to be exec'd, it is still a
significant reduction in kernel attack surface. Pairing that with a
LSM, delayed chroot, etc could fill in the gaps with respect to a
greater sandboxing solution. I'd certainly take that tradeoff for
running binaries that I don't control the source for :) That said,
LD_PRELOAD, ptrace injection, and other tricks could allow for the
injection of a very targeted filterset, but I don't think that
invalidates the on-exec case given the brittleness relying exclusively
on such tactics. Does that seem reasonable?


Thanks!
will
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2011-05-04 11:17    [W:0.714 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site