lkml.org 
[lkml]   [2011]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 14/16] cciss: do not attempt PCI power management reset method if we know it won't work.
From
Date
From: Stephen M. Cameron <scameron@beardog.cce.hp.com>

Just go straight to the soft-reset method instead.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
---
drivers/block/cciss.c | 36 +++++++++++++++++++++++++++++++-----
1 files changed, 31 insertions(+), 5 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 7990b98..865484e 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -558,7 +558,7 @@ static void __devinit cciss_procinit(ctlr_info_t *h)
#define to_hba(n) container_of(n, struct ctlr_info, dev)
#define to_drv(n) container_of(n, drive_info_struct, dev)

-/* List of controllers which cannot be reset on kexec with reset_devices */
+/* List of controllers which cannot be hard reset on kexec with reset_devices */
static u32 unresettable_controller[] = {
0x324a103C, /* Smart Array P712m */
0x324b103C, /* SmartArray P711m */
@@ -576,23 +576,45 @@ static u32 unresettable_controller[] = {
0x409D0E11, /* Smart Array 6400 EM */
};

-static int ctlr_is_resettable(struct ctlr_info *h)
+/* List of controllers which cannot even be soft reset */
+static u32 soft_unresettable_controller[] = {
+ 0x409C0E11, /* Smart Array 6400 */
+ 0x409D0E11, /* Smart Array 6400 EM */
+};
+
+static int ctlr_is_hard_resettable(u32 board_id)
{
int i;

for (i = 0; i < ARRAY_SIZE(unresettable_controller); i++)
- if (unresettable_controller[i] == h->board_id)
+ if (unresettable_controller[i] == board_id)
return 0;
return 1;
}

+static int ctlr_is_soft_resettable(u32 board_id)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(soft_unresettable_controller); i++)
+ if (soft_unresettable_controller[i] == board_id)
+ return 0;
+ return 1;
+}
+
+static int ctlr_is_resettable(u32 board_id)
+{
+ return ctlr_is_hard_resettable(board_id) ||
+ ctlr_is_soft_resettable(board_id);
+}
+
static ssize_t host_show_resettable(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct ctlr_info *h = to_hba(dev);

- return snprintf(buf, 20, "%d\n", ctlr_is_resettable(h));
+ return snprintf(buf, 20, "%d\n", ctlr_is_resettable(h->board_id));
}
static DEVICE_ATTR(resettable, S_IRUGO, host_show_resettable, NULL);

@@ -4601,12 +4623,16 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
* likely not be happy. Just forbid resetting this conjoined mess.
*/
cciss_lookup_board_id(pdev, &board_id);
- if (board_id == 0x409C0E11 || board_id == 0x409D0E11) {
+ if (!ctlr_is_resettable(board_id)) {
dev_warn(&pdev->dev, "Cannot reset Smart Array 640x "
"due to shared cache module.");
return -ENODEV;
}

+ /* if controller is soft- but not hard resettable... */
+ if (!ctlr_is_hard_resettable(board_id))
+ return -ENOTSUPP; /* try soft reset later. */
+
/* Save the PCI command register */
pci_read_config_word(pdev, 4, &command_register);
/* Turn the board off. This is so that later pci_restore_state()


\
 
 \ /
  Last update: 2011-05-03 22:05    [W:0.121 / U:0.064 seconds]
©2003-2014 Jasper Spaans. Advertise on this site