lkml.org 
[lkml]   [2011]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 22/23] sst: internal speaker needs setting a GPIO line
Date
From: Lu Guanqun <guanqun.lu@intel.com>

On Moorestown platform, internal speaker's power line is connected to a GPIO
line, so we need to enable or disable it properly.

Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Jeff Cheng <jeff_cheng@wistron.com>
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
---

drivers/staging/intel_sst/intel_sst.h | 2 ++
drivers/staging/intel_sst/intelmid.c | 13 ++++++++++--
drivers/staging/intel_sst/intelmid_v2_control.c | 25 ++++++++++++++++++++++-
3 files changed, 37 insertions(+), 3 deletions(-)


diff --git a/drivers/staging/intel_sst/intel_sst.h b/drivers/staging/intel_sst/intel_sst.h
index 986a3df..635cf58 100644
--- a/drivers/staging/intel_sst/intel_sst.h
+++ b/drivers/staging/intel_sst/intel_sst.h
@@ -120,6 +120,8 @@ struct snd_pmic_ops {
unsigned int hw_dmic_map[MFLD_MAX_HW_CH];
unsigned int available_dmics;
int (*set_hw_dmic_route) (u8 index);
+
+ int gpio_amp;
};

extern void sst_mad_send_jack_report(struct snd_jack *jack,
diff --git a/drivers/staging/intel_sst/intelmid.c b/drivers/staging/intel_sst/intelmid.c
index cbe09f2..25656ad 100644
--- a/drivers/staging/intel_sst/intelmid.c
+++ b/drivers/staging/intel_sst/intelmid.c
@@ -40,6 +40,7 @@
#include <sound/jack.h>
#include <sound/pcm_params.h>
#include <sound/initval.h>
+#include <linux/gpio.h>
#include "intel_sst.h"
#include "intel_sst_ioctl.h"
#include "intel_sst_fw_ipc.h"
@@ -920,14 +921,20 @@ int __devinit snd_intelmad_probe(struct platform_device *pdev)
ret_val = snd_intelmad_create(intelmaddata, card);
if (ret_val) {
pr_err("snd_intelmad_create failed\n");
- goto set_pvt_data;;
+ goto set_pvt_data;
}
card->private_data = &intelmaddata;
snd_card_set_dev(card, &pdev->dev);
ret_val = snd_card_register(card);
if (ret_val) {
pr_err("snd_card_register failed\n");
- goto set_pvt_data;;
+ goto set_pvt_data;
+ }
+ if (pdev->dev.platform_data) {
+ int gpio_amp = *(int *)pdev->dev.platform_data;
+ if (gpio_request_one(gpio_amp, GPIOF_OUT_INIT_LOW, "amp power"))
+ gpio_amp = 0;
+ intelmaddata->sstdrv_ops->scard_ops->gpio_amp = gpio_amp;
}

pr_debug("snd_intelmad_probe complete\n");
@@ -957,6 +964,8 @@ static int snd_intelmad_remove(struct platform_device *pdev)
struct snd_intelmad *intelmaddata = platform_get_drvdata(pdev);

if (intelmaddata) {
+ if (intelmaddata->sstdrv_ops->scard_ops->gpio_amp)
+ gpio_free(intelmaddata->sstdrv_ops->scard_ops->gpio_amp);
free_irq(intelmaddata->irq, intelmaddata);
snd_card_free(intelmaddata->card);
}
diff --git a/drivers/staging/intel_sst/intelmid_v2_control.c b/drivers/staging/intel_sst/intelmid_v2_control.c
index b19f51e..2dc6738 100644
--- a/drivers/staging/intel_sst/intelmid_v2_control.c
+++ b/drivers/staging/intel_sst/intelmid_v2_control.c
@@ -28,6 +28,7 @@

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

+#include <linux/gpio.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/file.h>
@@ -87,6 +88,12 @@ enum reg_v3 {
AUXDBNC = 0x12f,
};

+static void nc_set_amp_power(int power)
+{
+ if (snd_pmic_ops_nc.gpio_amp)
+ gpio_set_value(snd_pmic_ops_nc.gpio_amp, power);
+}
+
/****
* nc_init_card - initialize the sound card
*
@@ -213,6 +220,16 @@ static int nc_power_up_pb(unsigned int port)

msleep(30);

+ /*
+ * There is a mismatch between Playback Sources and the enumerated
+ * values of output sources. This mismatch causes ALSA upper to send
+ * Item 1 for Internal Speaker, but the expected enumeration is 2! For
+ * now, treat MONO_EARPIECE and INTERNAL_SPKR identically and power up
+ * the needed resources
+ */
+ if (snd_pmic_ops_nc.output_dev_id == MONO_EARPIECE ||
+ snd_pmic_ops_nc.output_dev_id == INTERNAL_SPKR)
+ nc_set_amp_power(1);
return nc_enable_audiodac(UNMUTE);

}
@@ -274,7 +291,6 @@ static int nc_power_down(void)
int retval = 0;
struct sc_reg_access sc_access[5];

-
if (snd_pmic_ops_nc.card_status == SND_CARD_UN_INIT)
retval = nc_init_card();
if (retval)
@@ -284,6 +300,10 @@ static int nc_power_down(void)

pr_debug("powering dn nc_power_down ....\n");

+ if (snd_pmic_ops_nc.output_dev_id == MONO_EARPIECE ||
+ snd_pmic_ops_nc.output_dev_id == INTERNAL_SPKR)
+ nc_set_amp_power(0);
+
msleep(30);

sc_access[0].reg_addr = DRVPOWERCTRL;
@@ -519,9 +539,12 @@ static int nc_set_selected_output_dev(u8 value)
switch (value) {
case STEREO_HEADPHONE:
retval = sst_sc_reg_access(sc_access_HP, PMIC_WRITE, 2);
+ nc_set_amp_power(0);
break;
+ case MONO_EARPIECE:
case INTERNAL_SPKR:
retval = sst_sc_reg_access(sc_access_IS, PMIC_WRITE, 2);
+ nc_set_amp_power(1);
break;
default:
pr_err("rcvd illegal request: %d\n", value);


\
 
 \ /
  Last update: 2011-05-03 19:01    [W:0.156 / U:11.196 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site