lkml.org 
[lkml]   [2011]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] misc/eeprom: add driver for 93xx46 EEPROMs over GPIO
On 05/24/11 17:02, Anatolij Gustschin wrote:
> 93xx46 EEPROMs can be connected using GPIO lines. Add a generic
> 93xx46 EEPROM driver using common GPIO API for such configurations.
> A platform is supposed to register appropriate 93xx46 gpio device
> providing GPIO interface description and using this driver
> read/write/erase access to the EEPROM chip can be easily done
> over sysfs files.
Could you explain why this makes more sense than an spi driver and
use of spi_gpio ?

It's microwire compatible according to random google provided datasheet,
which iirc is a particular form of spi (half duplex, spi mode 0 according
to wikipedia)

That would give us a more generally useful driver.
>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
> drivers/misc/eeprom/Kconfig | 10 +
> drivers/misc/eeprom/Makefile | 1 +
> drivers/misc/eeprom/gpio-93xx46.c | 525 +++++++++++++++++++++++++++++++++++++
> include/linux/gpio-93xx46.h | 19 ++
> 4 files changed, 555 insertions(+), 0 deletions(-)
> create mode 100644 drivers/misc/eeprom/gpio-93xx46.c
> create mode 100644 include/linux/gpio-93xx46.h
>
> diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
> index 9118613..fcceffd 100644
> --- a/drivers/misc/eeprom/Kconfig
> +++ b/drivers/misc/eeprom/Kconfig
> @@ -70,4 +70,14 @@ config EEPROM_93CX6
>
> If unsure, say N.
>
> +config EEPROM_GPIO_93XX46
> + tristate "EEPROM 93XX46 over GPIO support"
> + depends on GPIOLIB && SYSFS
> + help
> + Driver for the EEPROM chipsets 93xx46x connected with GPIO.
> + The driver supports both read and write commands and also
> + the command to erase the whole EEPROM.
> +
> + If unsure, say N.
> +
> endmenu
> diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile
> index df3d68f..38d8259 100644
> --- a/drivers/misc/eeprom/Makefile
> +++ b/drivers/misc/eeprom/Makefile
> @@ -3,3 +3,4 @@ obj-$(CONFIG_EEPROM_AT25) += at25.o
> obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o
> obj-$(CONFIG_EEPROM_MAX6875) += max6875.o
> obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
> +obj-$(CONFIG_EEPROM_GPIO_93XX46) += gpio-93xx46.o
> diff --git a/drivers/misc/eeprom/gpio-93xx46.c b/drivers/misc/eeprom/gpio-93xx46.c
> new file mode 100644
> index 0000000..5c7d7dd
> --- /dev/null
> +++ b/drivers/misc/eeprom/gpio-93xx46.c
> @@ -0,0 +1,525 @@
> +/*
> + * Driver for 93xx46 EEPROMs over GPIO lines.
> + *
> + * (C) 2011 DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/fs.h>
> +#include <linux/gpio.h>
> +#include <linux/gpio-93xx46.h>
> +#include <linux/delay.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/sysctl.h>
> +
> +#define OP_START 0x4
> +#define OP_WRITE (OP_START | 0x1)
> +#define OP_READ (OP_START | 0x2)
> +#define OP_ERASE (OP_START | 0x3)
> +#define OP_EWEN (OP_START | 0x0)
> +#define OP_EWDS (OP_START | 0x0)
> +#define ADDR_EWDS 0x00
> +#define ADDR_ERAL 0x20
> +#define ADDR_EWEN 0x30
> +#define DELAY 450
> +
> +struct gpio_93xx46_dev {
> + struct device *dev;
> + struct gpio_93xx46_platform_data *pdata;
> + struct bin_attribute bin;
> + int addrlen;
> +
> + struct gpio pins[4];
> +};
> +
> +static DEFINE_MUTEX(gpio_93xx46_mutex);
> +
> +static int gpio_93xx46_request_gpios(struct gpio_93xx46_dev *edev)
> +{
> + struct gpio_93xx46_platform_data *pd = edev->pdata;
> + const char *name = to_platform_device(edev->dev)->name;
> + int ret;
> +
> + edev->pins[0].gpio = pd->clk;
> + edev->pins[0].flags = GPIOF_OUT_INIT_LOW;
> + edev->pins[0].label = name;
> + edev->pins[1].gpio = pd->cs;
> + edev->pins[1].flags = GPIOF_OUT_INIT_LOW;
> + edev->pins[1].label = name;
> + edev->pins[2].gpio = pd->din;
> + edev->pins[2].flags = GPIOF_OUT_INIT_LOW;
> + edev->pins[2].label = name;
> + edev->pins[3].gpio = pd->dout;
> + edev->pins[3].flags = GPIOF_IN;
> + edev->pins[3].label = name;
> +
> + ret = gpio_request_array(edev->pins, ARRAY_SIZE(edev->pins));
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static void gpio_93xx46_tx_bit(struct gpio_93xx46_dev *edev, bool bit)
> +{
> + struct gpio_93xx46_platform_data *pd = edev->pdata;
> +
> + if (bit)
> + gpio_set_value(pd->din, 1);
> + else
> + gpio_set_value(pd->din, 0);
> +
> + ndelay(DELAY);
> + gpio_set_value(pd->clk, 1);
> + ndelay(DELAY);
> + gpio_set_value(pd->clk, 0);
> +}
> +
> +static inline unsigned char
> +gpio_93xx46_rx_byte(struct gpio_93xx46_platform_data *pd)
> +{
> + int data = 0, i;
> +
> + for (i = 0; i < 8 ; i++) {
> + gpio_set_value(pd->clk, 1);
> + ndelay(DELAY);
> + gpio_set_value(pd->clk, 0);
> +
> + if (gpio_get_value(pd->dout))
> + data |= 1;
> + data <<= 1;
> + ndelay(DELAY);
> + }
> + return data >>= 1;
> +}
> +
> +static void gpio_93xx46_read(struct gpio_93xx46_dev *edev,
> + char *buf, unsigned offs, size_t cnt)
> +{
> + struct gpio_93xx46_platform_data *pd = edev->pdata;
> + int active = !(pd->flags & EE_CS_LOW);
> + int cmd_addr, len, mask;
> + int i;
> +
> + cmd_addr = (OP_READ << edev->addrlen);
> + if (edev->addrlen == 7) {
> + cmd_addr |= (offs & 0x7f);
> + len = 10;
> + } else {
> + cmd_addr |= (offs & 0x3f);
> + len = 9;
> + }
> + mask = 1 << (len - 1);
> +
> + mutex_lock(&gpio_93xx46_mutex);
> +
> + gpio_set_value(pd->cs, !active);
> + gpio_set_value(pd->clk, 0);
> + gpio_set_value(pd->din, 1);
> + ndelay(DELAY);
> +
> + if (pd->prepare)
> + pd->prepare(edev);
> +
> + gpio_set_value(pd->cs, active);
> + ndelay(DELAY);
> +
> + for (i = 0; i < len; i++, mask >>= 1)
> + gpio_93xx46_tx_bit(edev, !!(cmd_addr & mask));
> +
> + ndelay(DELAY);
> +
> + for (i = 0; i < cnt; i++)
> + buf[i] = gpio_93xx46_rx_byte(pd);
> +
> + gpio_set_value(pd->clk, 0);
> + gpio_set_value(pd->din, 0);
> + gpio_set_value(pd->cs, !active);
> + ndelay(DELAY);
> +
> + if (pd->finish)
> + pd->finish(edev);
> +
> + mutex_unlock(&gpio_93xx46_mutex);
> +}
> +
> +static void gpio_93xx46_ewen(struct gpio_93xx46_dev *edev)
> +{
> + struct gpio_93xx46_platform_data *pd = edev->pdata;
> + int active = !(pd->flags & EE_CS_LOW);
> + int cmd_addr, len, mask;
> + int i;
> +
> + cmd_addr = OP_EWEN << edev->addrlen;
> + if (edev->addrlen == 7) {
> + cmd_addr |= ADDR_EWEN << 1;
> + len = 10;
> + } else {
> + cmd_addr |= ADDR_EWEN;
> + len = 9;
> + }
> + mask = 1 << (len - 1);
> +
> + mutex_lock(&gpio_93xx46_mutex);
> +
> + gpio_set_value(pd->cs, !active);
> + gpio_set_value(pd->clk, 0);
> + gpio_set_value(pd->din, 1);
> + ndelay(DELAY);
> +
> + if (pd->prepare)
> + pd->prepare(edev);
> +
> + gpio_set_value(pd->cs, active);
> + ndelay(DELAY);
> +
> + for (i = 0; i < len; i++, mask >>= 1)
> + gpio_93xx46_tx_bit(edev, !!(cmd_addr & mask));
> +
> + ndelay(DELAY);
> +
> + gpio_set_value(pd->clk, 0);
> + gpio_set_value(pd->din, 0);
> + gpio_set_value(pd->cs, !active);
> + ndelay(DELAY);
> +
> + if (pd->finish)
> + pd->finish(edev);
> +
> + mutex_unlock(&gpio_93xx46_mutex);
> +}
> +
> +static void gpio_93xx46_ewds(struct gpio_93xx46_dev *edev)
> +{
> + struct gpio_93xx46_platform_data *pd = edev->pdata;
> + int active = !(pd->flags & EE_CS_LOW);
> + int cmd_addr, len, mask;
> + int i;
> +
> + cmd_addr = OP_EWDS << edev->addrlen;
> + if (edev->addrlen == 7) {
> + cmd_addr |= ADDR_EWDS << 1;
> + len = 10;
> + } else {
> + cmd_addr |= ADDR_EWDS;
> + len = 9;
> + }
> + mask = 1 << (len - 1);
> +
> + mutex_lock(&gpio_93xx46_mutex);
> +
> + gpio_set_value(pd->cs, !active);
> + gpio_set_value(pd->clk, 0);
> + gpio_set_value(pd->din, 1);
> + ndelay(DELAY);
> +
> + if (pd->prepare)
> + pd->prepare(edev);
> +
> + gpio_set_value(pd->cs, active);
> + ndelay(DELAY);
> +
> + for (i = 0; i < len; i++, mask >>= 1)
> + gpio_93xx46_tx_bit(edev, !!(cmd_addr & mask));
> +
> + ndelay(DELAY);
> +
> + gpio_set_value(pd->clk, 0);
> + gpio_set_value(pd->din, 0);
> + gpio_set_value(pd->cs, !active);
> + ndelay(DELAY);
> +
> + if (pd->finish)
> + pd->finish(edev);
> +
> + mutex_unlock(&gpio_93xx46_mutex);
> +}
> +
> +static void gpio_93xx46_eral(struct gpio_93xx46_dev *edev)
> +{
> + struct gpio_93xx46_platform_data *pd = edev->pdata;
> + int active = !(pd->flags & EE_CS_LOW);
> + int cmd_addr, len, mask;
> + int i, to = 10;
> +
> + cmd_addr = OP_START << edev->addrlen;
> + if (edev->addrlen == 7) {
> + cmd_addr |= ADDR_ERAL << 1;
> + len = 10;
> + } else {
> + cmd_addr |= ADDR_ERAL;
> + len = 9;
> + }
> + mask = 1 << (len - 1);
> +
> + mutex_lock(&gpio_93xx46_mutex);
> +
> + gpio_set_value(pd->cs, !active);
> + gpio_set_value(pd->clk, 0);
> + gpio_set_value(pd->din, 1);
> + ndelay(DELAY);
> +
> + if (pd->prepare)
> + pd->prepare(edev);
> +
> + gpio_set_value(pd->cs, active);
> + ndelay(DELAY);
> +
> + for (i = 0; i < len; i++, mask >>= 1)
> + gpio_93xx46_tx_bit(edev, !!(cmd_addr & mask));
> +
> + gpio_set_value(pd->cs, !active);
> + ndelay(DELAY);
> + gpio_set_value(pd->cs, active);
> + ndelay(DELAY);
> +
> + while (!gpio_get_value(pd->dout)) {
> + if (!to--) {
> + dev_err(edev->dev, "erase not ready timeout\n");
> + break;
> + }
> + mdelay(1);
> + }
> +
> + gpio_set_value(pd->clk, 0);
> + gpio_set_value(pd->din, 0);
> + gpio_set_value(pd->cs, !active);
> + ndelay(DELAY);
> +
> + if (pd->finish)
> + pd->finish(edev);
> +
> + mutex_unlock(&gpio_93xx46_mutex);
> +}
> +
> +static void gpio_93xx46_write(struct gpio_93xx46_dev *edev,
> + unsigned offs, char data)
> +{
> + struct gpio_93xx46_platform_data *pd = edev->pdata;
> + int active = !(pd->flags & EE_CS_LOW);
> + int cmd_addr, len, mask;
> + int i, to = 10;
> +
> + cmd_addr = (OP_WRITE << edev->addrlen);
> + if (edev->addrlen == 7) {
> + cmd_addr |= (offs & 0x7f);
> + len = 10;
> + } else {
> + cmd_addr |= (offs & 0x3f);
> + len = 9;
> + }
> + mask = 1 << (len - 1);
> +
> + mutex_lock(&gpio_93xx46_mutex);
> +
> + gpio_set_value(pd->cs, !active);
> + gpio_set_value(pd->clk, 0);
> + gpio_set_value(pd->din, 1);
> + ndelay(DELAY);
> +
> + if (pd->prepare)
> + pd->prepare(edev);
> +
> + gpio_set_value(pd->cs, active);
> + ndelay(DELAY);
> +
> + for (i = 0; i < len; i++, mask >>= 1)
> + gpio_93xx46_tx_bit(edev, !!(cmd_addr & mask));
> +
> + ndelay(DELAY);
> +
> + for (i = 0; i < 8; i++) {
> + gpio_93xx46_tx_bit(edev, !!(data & 0x80));
> + data <<= 1;
> + }
> +
> + gpio_set_value(pd->cs, !active);
> + ndelay(DELAY);
> + gpio_set_value(pd->cs, active);
> + ndelay(DELAY);
> +
> + while (!gpio_get_value(pd->dout)) {
> + if (!to--) {
> + dev_err(edev->dev, "write not ready timeout\n");
> + break;
> + }
> + mdelay(1);
> + }
> +
> + gpio_set_value(pd->clk, 0);
> + gpio_set_value(pd->din, 0);
> + gpio_set_value(pd->cs, !active);
> + ndelay(DELAY);
> +
> + if (pd->finish)
> + pd->finish(edev);
> +
> + mutex_unlock(&gpio_93xx46_mutex);
> +}
> +
> +static ssize_t
> +gpio_93xx46_bin_read(struct file *filp, struct kobject *kobj,
> + struct bin_attribute *bin_attr,
> + char *buf, loff_t off, size_t count)
> +{
> + struct device *dev = container_of(kobj, struct device, kobj);
> + struct gpio_93xx46_dev *edev = dev_get_drvdata(dev);
> +
> + if (unlikely(!count))
> + return count;
> + if (unlikely(off >= edev->bin.size))
> + return 0;
> + if ((off + count) > edev->bin.size)
> + count = edev->bin.size - off;
> +
> + gpio_93xx46_read(edev, buf, off, count);
> + return count;
> +}
> +
> +static ssize_t
> +gpio_93xx46_bin_write(struct file *filp, struct kobject *kobj,
> + struct bin_attribute *bin_attr,
> + char *buf, loff_t off, size_t count)
> +{
> + struct device *dev = container_of(kobj, struct device, kobj);
> + struct gpio_93xx46_dev *edev = dev_get_drvdata(dev);
> + int i;
> +
> + if (unlikely(!count))
> + return count;
> + if (unlikely(off >= edev->bin.size))
> + return 0;
> + if ((off + count) > edev->bin.size)
> + count = edev->bin.size - off;
> +
> + gpio_93xx46_ewen(edev);
> +
> + for (i = 0; i < count; i++)
> + gpio_93xx46_write(edev, off + i, buf[i]);
> +
> + gpio_93xx46_ewds(edev);
> +
> + return count;
> +}
> +
> +ssize_t gpio_93xx46_store_erase(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct gpio_93xx46_dev *edev = dev_get_drvdata(dev);
> + int erase = 0;
> +
> + sscanf(buf, "%d", &erase);
> + if (erase) {
> + gpio_93xx46_ewen(edev);
> + gpio_93xx46_eral(edev);
> + gpio_93xx46_ewds(edev);
> + }
> +
> + return count;
> +}
> +static DEVICE_ATTR(erase, S_IWUSR, NULL, gpio_93xx46_store_erase);
> +
> +static int __devinit gpio_93xx46_probe(struct platform_device *pdev)
> +{
> + struct gpio_93xx46_platform_data *pd = pdev->dev.platform_data;
> + struct gpio_93xx46_dev *edev = NULL;
> + int err;
> +
> + if (!pd)
> + return -ENODEV;
> +
> + edev = kzalloc(sizeof(*edev), GFP_KERNEL);
> + if (!edev)
> + return -ENOMEM;
> +
> + edev->dev = &pdev->dev;
> + edev->pdata = pd;
> + if (pd->flags & EE_ADDR8)
> + edev->addrlen = 7;
> + else if (pd->flags & EE_ADDR16)
> + edev->addrlen = 6;
> + else {
> + dev_err(&pdev->dev,
> + "invalid address flags 0x%x\n", pd->flags);
> + err = -EINVAL;
> + goto fail;
> + }
> +
> + err = gpio_93xx46_request_gpios(edev);
> + if (err)
> + goto fail;
> +
> + sysfs_bin_attr_init(&edev->bin);
> + edev->bin.attr.name = "eeprom";
> + edev->bin.attr.mode = S_IRUSR;
> + edev->bin.read = gpio_93xx46_bin_read;
> + edev->bin.size = 128;
> + if (!(pd->flags & EE_READONLY)) {
> + edev->bin.write = gpio_93xx46_bin_write;
> + edev->bin.attr.mode |= S_IWUSR;
> + }
> +
> + err = sysfs_create_bin_file(&pdev->dev.kobj, &edev->bin);
> + if (err)
> + goto fail;
> +
> + if (!(pd->flags & EE_READONLY)) {
> + if (device_create_file(&pdev->dev, &dev_attr_erase))
> + dev_err(&pdev->dev, "can't create erase interface\n");
> + }
> +
> + platform_set_drvdata(pdev, edev);
> +
> + return 0;
> +fail:
> + kfree(edev);
> + return err;
> +}
> +
> +static int __devexit gpio_93xx46_remove(struct platform_device *pdev)
> +{
> + struct gpio_93xx46_platform_data *pd = pdev->dev.platform_data;
> + struct gpio_93xx46_dev *edev = platform_get_drvdata(pdev);
> +
> + if (!(pd->flags & EE_READONLY))
> + device_remove_file(&pdev->dev, &dev_attr_erase);
> + sysfs_remove_bin_file(&pdev->dev.kobj, &edev->bin);
> + gpio_free_array(edev->pins, ARRAY_SIZE(edev->pins));
> + platform_set_drvdata(pdev, NULL);
> + kfree(edev);
> + return 0;
> +}
> +
> +static struct platform_driver gpio_93xx46_driver = {
> + .probe = gpio_93xx46_probe,
> + .remove = __devexit_p(gpio_93xx46_remove),
> + .driver = {
> + .name = "gpio-93xx46",
> + .owner = THIS_MODULE,
> + }
> +};
> +
> +static int __init gpio_93xx46_init(void)
> +{
> + return platform_driver_register(&gpio_93xx46_driver);
> +}
> +module_init(gpio_93xx46_init);
> +
> +static void __exit gpio_93xx46_exit(void)
> +{
> + platform_driver_unregister(&gpio_93xx46_driver);
> +}
> +module_exit(gpio_93xx46_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("Driver for 93xx46 EEPROMs over GPIO");
> +MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
> +MODULE_ALIAS("platform:gpio-93xx46");
> diff --git a/include/linux/gpio-93xx46.h b/include/linux/gpio-93xx46.h
> new file mode 100644
> index 0000000..a565de6
> --- /dev/null
> +++ b/include/linux/gpio-93xx46.h
> @@ -0,0 +1,19 @@
> +/*
> + * Module: gpio-93xx46
> + * Interface description for 93xx46 EEPROMs connected over GPIO.
> + */
> +struct gpio_93xx46_platform_data {
> + unsigned clk;
> + unsigned cs;
> + unsigned din;
> + unsigned dout;
> +
> + u8 flags;
> +#define EE_ADDR8 0x01 /* 8 bit addr. cfg */
> +#define EE_ADDR16 0x02 /* 16 bit addr. cfg */
> +#define EE_READONLY 0x08 /* forbid writing */
> +#define EE_CS_LOW 0x10 /* CS is active low */
> +
> + void (*prepare)(void *);
> + void (*finish)(void *);
> +};



\
 
 \ /
  Last update: 2011-05-25 11:31    [W:0.183 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site