lkml.org 
[lkml]   [2011]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: PCI BAR1 Unassigned
On Thu, May 19, 2011 at 10:28 AM, Jan Zwiegers <jan@radicalsystems.co.za> wrote:
> I have the problem below where my PCI card's second BAR does not get
> assigned.
> What can be the cause of this problem?
> The last kernel I tested on which worked OK was 2.6.27.
> My current problematic kernel 2.6.35.
>
> 05:01.0 Unassigned class [ff00]: Eagle Technology PCI-703 Analog I/O Card
> (rev 5c)
>    Flags: bus master, slow devsel, latency 32, IRQ 22
>    Memory at 93b00000 (type 3, prefetchable) [size=2K]
>    Memory at <unassigned> (type 3, prefetchable)
>    Capabilities: [80] #00 [0600]
>    Kernel modules: pci703drv

Could be resource exhaustion or, more likely, we ran out because we
now assign resource to things that don't need them, leaving none for
things that *do* need them. This sounds like a regression, so we
should open a bugzilla for it and attach dmesg logs from 2.6.27 and
2.6.35.

Does this problem keep the driver from working? (Sometimes drivers
don't actually use all the BARs a device supports.)

Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2011-05-19 20:53    [W:0.914 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site