lkml.org 
[lkml]   [2011]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v3] w1: Add Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC support.
Add support for the Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC.

I've updated the driver based on feedback from the last version.
I believe the locking is correct because the w1_ds2780_io function
has locking in it. If there's still a problem that I'm missing let
me know and I can correct it.

Changes for v3:
- Formatting changes suggested from last version
- Moved read/write functions to battery driver
- Corrected temperature calculation
- Changed EEPROM access to bin_attribute

Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com>
---
drivers/power/Kconfig | 7 +
drivers/power/Makefile | 1 +
drivers/power/ds2780_battery.c | 853 ++++++++++++++++++++++++++++++++++++++++
drivers/w1/slaves/Kconfig | 13 +
drivers/w1/slaves/Makefile | 1 +
drivers/w1/slaves/w1_ds2780.c | 217 ++++++++++
drivers/w1/slaves/w1_ds2780.h | 129 ++++++
drivers/w1/w1_family.h | 1 +
8 files changed, 1222 insertions(+), 0 deletions(-)
create mode 100644 drivers/power/ds2780_battery.c
create mode 100644 drivers/w1/slaves/w1_ds2780.c
create mode 100644 drivers/w1/slaves/w1_ds2780.h
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 52a462f..dc8c531 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -68,6 +68,13 @@ config BATTERY_DS2760
help
Say Y here to enable support for batteries with ds2760 chip.

+config BATTERY_DS2780
+ tristate "DS2780 battery driver"
+ select W1
+ select W1_SLAVE_DS2780
+ help
+ Say Y here to enable support for batteries with ds2780 chip.
+
config BATTERY_DS2782
tristate "DS2782/DS2786 standalone gas-gauge"
depends on I2C
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 8385bfa..8224990 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_WM8350_POWER) += wm8350_power.o
obj-$(CONFIG_TEST_POWER) += test_power.o

obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
+obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o
obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
diff --git a/drivers/power/ds2780_battery.c b/drivers/power/ds2780_battery.c
new file mode 100644
index 0000000..55362dd
--- /dev/null
+++ b/drivers/power/ds2780_battery.c
@@ -0,0 +1,853 @@
+/*
+ * 1-wire client/driver for the Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC
+ *
+ * Copyright (C) 2010 Indesign, LLC
+ *
+ * Author: Clifton Barnes <cabarnes@indesign-llc.com>
+ *
+ * Based on ds2760_battery and ds2782_battery drivers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/param.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/idr.h>
+
+#include "../w1/w1.h"
+#include "../w1/slaves/w1_ds2780.h"
+
+/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
+#define DS2780_CURRENT_UNITS 1563
+/* Charge unit measurement in uAh for a 1 milli-ohm sense resistor */
+#define DS2780_CHARGE_UNITS 6250
+/* Number of bytes in user EEPROM space */
+#define DS2780_USER_EEPROM_SIZE (DS2780_EEPROM_BLOCK0_END - \
+ DS2780_EEPROM_BLOCK0_START + 1)
+/* Number of bytes in parameter EEPROM space */
+#define DS2780_PARAM_EEPROM_SIZE (DS2780_EEPROM_BLOCK1_END - \
+ DS2780_EEPROM_BLOCK1_START + 1)
+
+struct ds2780_device_info {
+ struct device *dev;
+ struct power_supply bat;
+ struct device *w1_dev;
+};
+
+enum current_types {
+ CURRENT_NOW,
+ CURRENT_AVG,
+};
+
+static const char model[] = "DS2780";
+static const char manufacturer[] = "Maxim/Dallas";
+
+static inline struct ds2780_device_info *to_ds2780_device_info(
+ struct power_supply *psy)
+{
+ return container_of(psy, struct ds2780_device_info, bat);
+}
+
+static inline struct power_supply *to_power_supply(struct device *dev)
+{
+ return dev_get_drvdata(dev);
+}
+
+static inline int ds2780_read8(struct device *dev, u8 *val, int addr)
+{
+ return w1_ds2780_io(dev, val, addr, sizeof(u8), 0);
+}
+
+static int ds2780_read16(struct device *dev, s16 *val, int addr)
+{
+ int ret;
+ u8 raw[2];
+
+ ret = w1_ds2780_io(dev, raw, addr, sizeof(u8) * 2, 0);
+ if (ret < 0)
+ return ret;
+
+ *val = (raw[0] << 8) | raw[1];
+
+ return 0;
+}
+
+static inline int ds2780_read_block(struct device *dev, u8 *val, int addr,
+ size_t count)
+{
+ return w1_ds2780_io(dev, val, addr, count, 0);
+}
+
+static inline int ds2780_write(struct device *dev, u8 *val, int addr,
+ size_t count)
+{
+ return w1_ds2780_io(dev, val, addr, count, 1);
+}
+
+static inline int ds2780_store_eeprom(struct device *dev, int addr)
+{
+ return w1_ds2780_eeprom_cmd(dev, addr, W1_DS2780_COPY_DATA);
+}
+
+static inline int ds2780_recall_eeprom(struct device *dev, int addr)
+{
+ return w1_ds2780_eeprom_cmd(dev, addr, W1_DS2780_RECALL_DATA);
+}
+
+static int ds2780_save_eeprom(struct ds2780_device_info *dev_info, int reg)
+{
+ int ret;
+
+ ret = ds2780_store_eeprom(dev_info->w1_dev, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2780_recall_eeprom(dev_info->w1_dev, reg);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+/* Set sense resistor value in mhos */
+static int ds2780_set_sense_register(struct ds2780_device_info *dev_info,
+ u8 conductance)
+{
+ int ret;
+
+ ret = ds2780_write(dev_info->w1_dev, &conductance,
+ DS2780_RSNSP_REG, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ return ds2780_save_eeprom(dev_info, DS2780_RSNSP_REG);
+}
+
+/* Get RSGAIN value from 0 to 1.999 in steps of 0.001 */
+static int ds2780_get_rsgain_register(struct ds2780_device_info *dev_info,
+ u16 *rsgain)
+{
+ return ds2780_read16(dev_info->w1_dev, rsgain, DS2780_RSGAIN_MSB_REG);
+}
+
+/* Set RSGAIN value from 0 to 1.999 in steps of 0.001 */
+static int ds2780_set_rsgain_register(struct ds2780_device_info *dev_info,
+ u16 rsgain)
+{
+ int ret;
+ u8 raw[] = {rsgain >> 8, rsgain & 0xFF};
+
+ ret = ds2780_write(dev_info->w1_dev, raw,
+ DS2780_RSGAIN_MSB_REG, sizeof(u8) * 2);
+ if (ret < 0)
+ return ret;
+
+ return ds2780_save_eeprom(dev_info, DS2780_RSGAIN_MSB_REG);
+}
+
+static int ds2780_get_voltage(struct ds2780_device_info *dev_info,
+ int *voltage_uV)
+{
+ int ret;
+ s16 voltage_raw;
+
+ /*
+ * The voltage value is located in 10 bits across the voltage MSB
+ * and LSB registers in two's compliment form
+ * Sign bit of the voltage value is in bit 7 of the voltage MSB register
+ * Bits 9 - 3 of the voltage value are in bits 6 - 0 of the
+ * voltage MSB register
+ * Bits 2 - 0 of the voltage value are in bits 7 - 5 of the
+ * voltage LSB register
+ */
+ ret = ds2780_read16(dev_info->w1_dev, &voltage_raw,
+ DS2780_VOLT_MSB_REG);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * DS2780 reports voltage in units of 4.88mV, but the battery class
+ * reports in units of uV, so convert by multiplying by 4880.
+ */
+ *voltage_uV = (voltage_raw / 32) * 4880;
+ return 0;
+}
+
+static int ds2780_get_temperature(struct ds2780_device_info *dev_info,
+ int *temperature)
+{
+ int ret;
+ s16 temperature_raw;
+
+ /*
+ * The temperature value is located in 10 bits across the temperature
+ * MSB and LSB registers in two's compliment form
+ * Sign bit of the temperature value is in bit 7 of the temperature
+ * MSB register
+ * Bits 9 - 3 of the temperature value are in bits 6 - 0 of the
+ * temperature MSB register
+ * Bits 2 - 0 of the temperature value are in bits 7 - 5 of the
+ * temperature LSB register
+ */
+ ret = ds2780_read16(dev_info->w1_dev, &temperature_raw,
+ DS2780_TEMP_MSB_REG);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Temperature is measured in units of 0.125 degrees celcius, the
+ * power_supply class measures temperature in tenths of degrees
+ * celsius. The temperature value is stored as a 10 bit number, plus
+ * sign in the upper bits of a 16 bit register.
+ */
+ *temperature = ((temperature_raw / 32) * 125) / 100;
+ return 0;
+}
+
+static int ds2780_get_current(struct ds2780_device_info *dev_info,
+ enum current_types type, int *current_uA)
+{
+ int ret, sense_res;
+ s16 current_raw;
+ u8 sense_res_raw, reg_msb;
+
+ /*
+ * The units of measurement for current are dependent on the value of
+ * the sense resistor.
+ */
+ ret = ds2780_read8(dev_info->w1_dev, &sense_res_raw, DS2780_RSNSP_REG);
+ if (ret < 0)
+ return ret;
+
+ if (sense_res_raw == 0) {
+ dev_err(dev_info->dev, "sense resistor value is 0\n");
+ return -ENXIO;
+ }
+ sense_res = 1000 / sense_res_raw;
+
+ if (type == CURRENT_NOW)
+ reg_msb = DS2780_CURRENT_MSB_REG;
+ else if (type == CURRENT_AVG)
+ reg_msb = DS2780_IAVG_MSB_REG;
+ else
+ return -EINVAL;
+
+ /*
+ * The current value is located in 16 bits across the current MSB
+ * and LSB registers in two's compliment form
+ * Sign bit of the current value is in bit 7 of the current MSB register
+ * Bits 14 - 8 of the current value are in bits 6 - 0 of the current
+ * MSB register
+ * Bits 7 - 0 of the current value are in bits 7 - 0 of the current
+ * LSB register
+ */
+ ret = ds2780_read16(dev_info->w1_dev, &current_raw, reg_msb);
+ if (ret < 0)
+ return ret;
+
+ *current_uA = current_raw * (DS2780_CURRENT_UNITS / sense_res);
+ return 0;
+}
+
+static int ds2780_get_accumulated_current(struct ds2780_device_info *dev_info,
+ int *accumulated_current)
+{
+ int ret, sense_res;
+ s16 current_raw;
+ u8 sense_res_raw;
+
+ /*
+ * The units of measurement for accumulated current are dependent on
+ * the value of the sense resistor.
+ */
+ ret = ds2780_read8(dev_info->w1_dev, &sense_res_raw, DS2780_RSNSP_REG);
+ if (ret < 0)
+ return ret;
+
+ if (sense_res_raw == 0) {
+ dev_err(dev_info->dev, "sense resistor value is 0\n");
+ return -ENXIO;
+ }
+ sense_res = 1000 / sense_res_raw;
+
+ /*
+ * The ACR value is located in 16 bits across the ACR MSB and
+ * LSB registers
+ * Bits 15 - 8 of the ACR value are in bits 7 - 0 of the ACR
+ * MSB register
+ * Bits 7 - 0 of the ACR value are in bits 7 - 0 of the ACR
+ * LSB register
+ */
+ ret = ds2780_read16(dev_info->w1_dev, &current_raw, DS2780_ACR_MSB_REG);
+ if (ret < 0)
+ return ret;
+
+ *accumulated_current = current_raw * (DS2780_CHARGE_UNITS / sense_res);
+ return 0;
+}
+
+static int ds2780_get_capacity(struct ds2780_device_info *dev_info,
+ int *capacity)
+{
+ int ret;
+ u8 raw;
+
+ ret = ds2780_read8(dev_info->w1_dev, &raw, DS2780_RARC_REG);
+ if (ret < 0)
+ return ret;
+
+ *capacity = raw;
+ return raw;
+}
+
+static int ds2780_get_status(struct ds2780_device_info *dev_info, int *status)
+{
+ int ret, current_uA, capacity;
+
+ ret = ds2780_get_current(dev_info, CURRENT_NOW, &current_uA);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2780_get_capacity(dev_info, &capacity);
+ if (ret < 0)
+ return ret;
+
+ if (capacity == 100)
+ *status = POWER_SUPPLY_STATUS_FULL;
+ else if (current_uA == 0)
+ *status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ else if (current_uA < 0)
+ *status = POWER_SUPPLY_STATUS_DISCHARGING;
+ else
+ *status = POWER_SUPPLY_STATUS_CHARGING;
+
+ return 0;
+}
+
+static int ds2780_get_charge_now(struct ds2780_device_info *dev_info,
+ int *charge_now)
+{
+ int ret;
+ u16 charge_raw;
+
+ /*
+ * The RAAC value is located in 16 bits across the RAAC MSB and
+ * LSB registers
+ * Bits 15 - 8 of the RAAC value are in bits 7 - 0 of the RAAC
+ * MSB register
+ * Bits 7 - 0 of the RAAC value are in bits 7 - 0 of the RAAC
+ * LSB register
+ */
+ ret = ds2780_read16(dev_info->w1_dev, &charge_raw, DS2780_RAAC_MSB_REG);
+ if (ret < 0)
+ return ret;
+
+ *charge_now = charge_raw * 1600;
+ return 0;
+}
+
+static int ds2780_get_control_register(struct ds2780_device_info *dev_info,
+ u8 *control_reg)
+{
+ return ds2780_read8(dev_info->w1_dev, control_reg, DS2780_CONTROL_REG);
+}
+
+static int ds2780_set_control_register(struct ds2780_device_info *dev_info,
+ u8 control_reg)
+{
+ int ret;
+
+ ret = ds2780_write(dev_info->w1_dev, &control_reg,
+ DS2780_CONTROL_REG, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ return ds2780_save_eeprom(dev_info, DS2780_CONTROL_REG);
+}
+
+static int ds2780_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = ds2780_get_voltage(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = ds2780_get_temperature(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = model;
+ break;
+
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = manufacturer;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = ds2780_get_current(dev_info, CURRENT_NOW, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ ret = ds2780_get_current(dev_info, CURRENT_AVG, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = ds2780_get_status(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = ds2780_get_capacity(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ ret = ds2780_get_accumulated_current(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ ret = ds2780_get_charge_now(dev_info, &val->intval);
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property ds2780_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+};
+
+static ssize_t ds2780_get_pmod_enabled(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 control_reg;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ /* Get power mode */
+ ret = ds2780_get_control_register(dev_info, &control_reg);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n",
+ !!(control_reg & DS2780_CONTROL_REG_PMOD));
+}
+
+static ssize_t ds2780_set_pmod_enabled(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u8 control_reg, new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ /* Set power mode */
+ ret = ds2780_get_control_register(dev_info, &control_reg);
+ if (ret < 0)
+ return ret;
+
+ ret = kstrtou8(buf, 0, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ if ((new_setting != 0) && (new_setting != 1)) {
+ dev_err(dev_info->dev, "Invalid pmod setting (0 or 1)\n");
+ return -EINVAL;
+ }
+
+ if (new_setting)
+ control_reg |= DS2780_CONTROL_REG_PMOD;
+ else
+ control_reg &= ~DS2780_CONTROL_REG_PMOD;
+
+ ret = ds2780_set_control_register(dev_info, control_reg);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2780_get_sense_resistor_value(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 sense_resistor;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ ret = ds2780_read8(dev_info->w1_dev, &sense_resistor, DS2780_RSNSP_REG);
+ if (ret < 0)
+ return ret;
+
+ ret = sprintf(buf, "%d\n", sense_resistor);
+ return ret;
+}
+
+static ssize_t ds2780_set_sense_resistor_value(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u8 new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ ret = kstrtou8(buf, 0, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2780_set_sense_register(dev_info, new_setting);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2780_get_rsgain_setting(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u16 rsgain;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ ret = ds2780_get_rsgain_register(dev_info, &rsgain);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", rsgain);
+}
+
+static ssize_t ds2780_set_rsgain_setting(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u16 new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ ret = kstrtou16(buf, 0, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ /* Gain can only be from 0 to 1.999 in steps of .001 */
+ if (new_setting > 1999) {
+ dev_err(dev_info->dev, "Invalid rsgain setting (0 - 1999)\n");
+ return -EINVAL;
+ }
+
+ ret = ds2780_set_rsgain_register(dev_info, new_setting);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2780_get_pio_pin(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 sfr;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ ret = ds2780_read8(dev_info->w1_dev, &sfr, DS2780_SFR_REG);
+ if (ret < 0)
+ return ret;
+
+ ret = sprintf(buf, "%d\n", sfr & DS2780_SFR_REG_PIOSC);
+ return ret;
+}
+
+static ssize_t ds2780_set_pio_pin(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u8 new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ ret = kstrtou8(buf, 0, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ if ((new_setting != 0) && (new_setting != 1)) {
+ dev_err(dev_info->dev, "Invalid pio_pin setting (0 or 1)\n");
+ return -EINVAL;
+ }
+
+ ret = ds2780_write(dev_info->w1_dev, &new_setting,
+ DS2780_SFR_REG, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2780_read_param_eeprom_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ count = min((loff_t)count,
+ DS2780_EEPROM_BLOCK1_END -
+ DS2780_EEPROM_BLOCK1_START + 1 - off);
+
+ return ds2780_read_block(dev_info->w1_dev, buf,
+ DS2780_EEPROM_BLOCK1_START + off, count);
+}
+
+static ssize_t ds2780_write_param_eeprom_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+ int ret;
+
+ count = min((loff_t)count,
+ DS2780_EEPROM_BLOCK1_END -
+ DS2780_EEPROM_BLOCK1_START + 1 - off);
+
+ ret = ds2780_write(dev_info->w1_dev, buf,
+ DS2780_EEPROM_BLOCK1_START + off, count);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2780_save_eeprom(dev_info, DS2780_EEPROM_BLOCK1_START);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static struct bin_attribute ds2780_param_eeprom_bin_attr = {
+ .attr = {
+ .name = "param_eeprom",
+ .mode = S_IRUGO | S_IWUSR,
+ },
+ .size = DS2780_EEPROM_BLOCK1_END - DS2780_EEPROM_BLOCK1_START + 1,
+ .read = ds2780_read_param_eeprom_bin,
+ .write = ds2780_write_param_eeprom_bin,
+};
+
+static ssize_t ds2780_read_user_eeprom_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ count = min((loff_t)count,
+ DS2780_EEPROM_BLOCK0_END -
+ DS2780_EEPROM_BLOCK0_START + 1 - off);
+
+ return ds2780_read_block(dev_info->w1_dev, buf,
+ DS2780_EEPROM_BLOCK0_START + off, count);
+
+}
+
+static ssize_t ds2780_write_user_eeprom_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+ int ret;
+
+ count = min((loff_t)count,
+ DS2780_EEPROM_BLOCK0_END -
+ DS2780_EEPROM_BLOCK0_START + 1 - off);
+
+ ret = ds2780_write(dev_info->w1_dev, buf,
+ DS2780_EEPROM_BLOCK0_START + off, count);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2780_save_eeprom(dev_info, DS2780_EEPROM_BLOCK0_START);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static struct bin_attribute ds2780_user_eeprom_bin_attr = {
+ .attr = {
+ .name = "user_eeprom",
+ .mode = S_IRUGO | S_IWUSR,
+ },
+ .size = DS2780_EEPROM_BLOCK0_END - DS2780_EEPROM_BLOCK0_START + 1,
+ .read = ds2780_read_user_eeprom_bin,
+ .write = ds2780_write_user_eeprom_bin,
+};
+
+static DEVICE_ATTR(pmod_enabled, S_IRUGO | S_IWUSR, ds2780_get_pmod_enabled,
+ ds2780_set_pmod_enabled);
+static DEVICE_ATTR(sense_resistor_value, S_IRUGO | S_IWUSR,
+ ds2780_get_sense_resistor_value, ds2780_set_sense_resistor_value);
+static DEVICE_ATTR(rsgain_setting, S_IRUGO | S_IWUSR, ds2780_get_rsgain_setting,
+ ds2780_set_rsgain_setting);
+static DEVICE_ATTR(pio_pin, S_IRUGO | S_IWUSR, ds2780_get_pio_pin,
+ ds2780_set_pio_pin);
+
+
+static struct attribute *ds2780_attributes[] = {
+ &dev_attr_pmod_enabled.attr,
+ &dev_attr_sense_resistor_value.attr,
+ &dev_attr_rsgain_setting.attr,
+ &dev_attr_pio_pin.attr,
+ NULL
+};
+
+static const struct attribute_group ds2780_attr_group = {
+ .attrs = ds2780_attributes,
+};
+
+static int __devinit ds2780_battery_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct ds2780_device_info *dev_info;
+
+ dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL);
+ if (!dev_info) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ platform_set_drvdata(pdev, dev_info);
+
+ dev_info->dev = &pdev->dev;
+ dev_info->w1_dev = pdev->dev.parent;
+ dev_info->bat.name = dev_name(&pdev->dev);
+ dev_info->bat.type = POWER_SUPPLY_TYPE_BATTERY;
+ dev_info->bat.properties = ds2780_battery_props;
+ dev_info->bat.num_properties = ARRAY_SIZE(ds2780_battery_props);
+ dev_info->bat.get_property = ds2780_battery_get_property;
+
+ ret = power_supply_register(&pdev->dev, &dev_info->bat);
+ if (ret) {
+ dev_err(dev_info->dev, "failed to register battery\n");
+ goto fail_free_info;
+ }
+
+ ret = sysfs_create_group(&dev_info->bat.dev->kobj, &ds2780_attr_group);
+ if (ret) {
+ dev_err(dev_info->dev, "failed to create sysfs group\n");
+ goto fail_unregister;
+ }
+
+ ret = sysfs_create_bin_file(&dev_info->bat.dev->kobj,
+ &ds2780_param_eeprom_bin_attr);
+ if (ret) {
+ dev_err(dev_info->dev,
+ "failed to create param eeprom bin file");
+ goto fail_remove_group;
+ }
+
+ ret = sysfs_create_bin_file(&dev_info->bat.dev->kobj,
+ &ds2780_user_eeprom_bin_attr);
+ if (ret) {
+ dev_err(dev_info->dev,
+ "failed to create user eeprom bin file");
+ goto fail_remove_bin_file;
+ }
+
+ return 0;
+
+fail_remove_bin_file:
+ sysfs_remove_bin_file(&dev_info->bat.dev->kobj,
+ &ds2780_param_eeprom_bin_attr);
+fail_remove_group:
+ sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2780_attr_group);
+fail_unregister:
+ power_supply_unregister(&dev_info->bat);
+fail_free_info:
+ kfree(dev_info);
+fail:
+ return ret;
+}
+
+static int __devexit ds2780_battery_remove(struct platform_device *pdev)
+{
+ struct ds2780_device_info *dev_info = platform_get_drvdata(pdev);
+
+ /* remove attributes */
+ sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2780_attr_group);
+
+ power_supply_unregister(&dev_info->bat);
+
+ kfree(dev_info);
+ return 0;
+}
+
+MODULE_ALIAS("platform:ds2780-battery");
+
+static struct platform_driver ds2780_battery_driver = {
+ .driver = {
+ .name = "ds2780-battery",
+ },
+ .probe = ds2780_battery_probe,
+ .remove = ds2780_battery_remove,
+};
+
+static int __init ds2780_battery_init(void)
+{
+ return platform_driver_register(&ds2780_battery_driver);
+}
+
+static void __exit ds2780_battery_exit(void)
+{
+ platform_driver_unregister(&ds2780_battery_driver);
+}
+
+module_init(ds2780_battery_init);
+module_exit(ds2780_battery_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Clifton Barnes <cabarnes@indesign-llc.com>");
+MODULE_DESCRIPTION("Maxim/Dallas DS2780 Stand-Alone Fuel Gauage IC driver");
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index f0c9096..d9fa263 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -61,6 +61,19 @@ config W1_SLAVE_DS2760

If you are unsure, say N.

+config W1_SLAVE_DS2780
+ tristate "Dallas 2780 battery monitor chip"
+ depends on W1
+ help
+ If you enable this you will have the DS2780 battery monitor
+ chip support.
+
+ The battery monitor chip is used in many batteries/devices
+ as the one who is responsible for charging/discharging/monitoring
+ Li+ batteries.
+
+ If you are unsure, say N.
+
config W1_SLAVE_BQ27000
tristate "BQ27000 slave support"
depends on W1
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
index 3c76350..00c9134 100644
--- a/drivers/w1/slaves/Makefile
+++ b/drivers/w1/slaves/Makefile
@@ -8,4 +8,5 @@ obj-$(CONFIG_W1_SLAVE_DS2423) += w1_ds2423.o
obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o
obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o
obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o
+obj-$(CONFIG_W1_SLAVE_DS2780) += w1_ds2780.o
obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o
diff --git a/drivers/w1/slaves/w1_ds2780.c b/drivers/w1/slaves/w1_ds2780.c
new file mode 100644
index 0000000..8ea2d45
--- /dev/null
+++ b/drivers/w1/slaves/w1_ds2780.c
@@ -0,0 +1,217 @@
+/*
+ * 1-Wire implementation for the ds2780 chip
+ *
+ * Copyright (C) 2010 Indesign, LLC
+ *
+ * Author: Clifton Barnes <cabarnes@indesign-llc.com>
+ *
+ * Based on w1-ds2760 driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/idr.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+#include "../w1_family.h"
+#include "w1_ds2780.h"
+
+int w1_ds2780_io(struct device *dev, char *buf, int addr, size_t count,
+ int io)
+{
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+ if (!dev)
+ return -ENODEV;
+
+ mutex_lock(&sl->master->mutex);
+
+ if (addr > DS2780_DATA_SIZE || addr < 0) {
+ count = 0;
+ goto out;
+ }
+ count = min((int)count, DS2780_DATA_SIZE - addr);
+
+ if (w1_reset_select_slave(sl) == 0) {
+ if (io) {
+ w1_write_8(sl->master, W1_DS2780_WRITE_DATA);
+ w1_write_8(sl->master, addr);
+ w1_write_block(sl->master, buf, count);
+ /* XXX w1_write_block returns void, not n_written */
+ } else {
+ w1_write_8(sl->master, W1_DS2780_READ_DATA);
+ w1_write_8(sl->master, addr);
+ count = w1_read_block(sl->master, buf, count);
+ }
+ }
+
+out:
+ mutex_unlock(&sl->master->mutex);
+
+ return count;
+}
+EXPORT_SYMBOL(w1_ds2780_io);
+
+int w1_ds2780_eeprom_cmd(struct device *dev, int addr, int cmd)
+{
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+ if (!dev)
+ return -EINVAL;
+
+ mutex_lock(&sl->master->mutex);
+
+ if (w1_reset_select_slave(sl) == 0) {
+ w1_write_8(sl->master, cmd);
+ w1_write_8(sl->master, addr);
+ }
+
+ mutex_unlock(&sl->master->mutex);
+ return 0;
+}
+EXPORT_SYMBOL(w1_ds2780_eeprom_cmd);
+
+static ssize_t w1_ds2780_read_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ return w1_ds2780_io(dev, buf, off, count, 0);
+}
+
+static struct bin_attribute w1_ds2780_bin_attr = {
+ .attr = {
+ .name = "w1_slave",
+ .mode = S_IRUGO,
+ },
+ .size = DS2780_DATA_SIZE,
+ .read = w1_ds2780_read_bin,
+};
+
+static DEFINE_IDR(bat_idr);
+static DEFINE_MUTEX(bat_idr_lock);
+
+static int new_bat_id(void)
+{
+ int ret;
+
+ while (1) {
+ int id;
+
+ ret = idr_pre_get(&bat_idr, GFP_KERNEL);
+ if (ret == 0)
+ return -ENOMEM;
+
+ mutex_lock(&bat_idr_lock);
+ ret = idr_get_new(&bat_idr, NULL, &id);
+ mutex_unlock(&bat_idr_lock);
+
+ if (ret == 0) {
+ ret = id & MAX_ID_MASK;
+ break;
+ } else if (ret == -EAGAIN) {
+ continue;
+ } else {
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static void release_bat_id(int id)
+{
+ mutex_lock(&bat_idr_lock);
+ idr_remove(&bat_idr, id);
+ mutex_unlock(&bat_idr_lock);
+}
+
+static int w1_ds2780_add_slave(struct w1_slave *sl)
+{
+ int ret;
+ int id;
+ struct platform_device *pdev;
+
+ id = new_bat_id();
+ if (id < 0) {
+ ret = id;
+ goto noid;
+ }
+
+ pdev = platform_device_alloc("ds2780-battery", id);
+ if (!pdev) {
+ ret = -ENOMEM;
+ goto pdev_alloc_failed;
+ }
+ pdev->dev.parent = &sl->dev;
+
+ ret = platform_device_add(pdev);
+ if (ret)
+ goto pdev_add_failed;
+
+ ret = sysfs_create_bin_file(&sl->dev.kobj, &w1_ds2780_bin_attr);
+ if (ret)
+ goto bin_attr_failed;
+
+ dev_set_drvdata(&sl->dev, pdev);
+
+ return 0;
+
+bin_attr_failed:
+pdev_add_failed:
+ platform_device_unregister(pdev);
+pdev_alloc_failed:
+ release_bat_id(id);
+noid:
+ return ret;
+}
+
+static void w1_ds2780_remove_slave(struct w1_slave *sl)
+{
+ struct platform_device *pdev = dev_get_drvdata(&sl->dev);
+ int id = pdev->id;
+
+ platform_device_unregister(pdev);
+ release_bat_id(id);
+ sysfs_remove_bin_file(&sl->dev.kobj, &w1_ds2780_bin_attr);
+}
+
+static struct w1_family_ops w1_ds2780_fops = {
+ .add_slave = w1_ds2780_add_slave,
+ .remove_slave = w1_ds2780_remove_slave,
+};
+
+static struct w1_family w1_ds2780_family = {
+ .fid = W1_FAMILY_DS2780,
+ .fops = &w1_ds2780_fops,
+};
+
+static int __init w1_ds2780_init(void)
+{
+ idr_init(&bat_idr);
+ return w1_register_family(&w1_ds2780_family);
+}
+
+static void __exit w1_ds2780_exit(void)
+{
+ w1_unregister_family(&w1_ds2780_family);
+ idr_destroy(&bat_idr);
+}
+
+module_init(w1_ds2780_init);
+module_exit(w1_ds2780_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Clifton Barnes <cabarnes@indesign-llc.com>");
+MODULE_DESCRIPTION("1-wire Driver for Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC");
diff --git a/drivers/w1/slaves/w1_ds2780.h b/drivers/w1/slaves/w1_ds2780.h
new file mode 100644
index 0000000..a1fba79
--- /dev/null
+++ b/drivers/w1/slaves/w1_ds2780.h
@@ -0,0 +1,129 @@
+/*
+ * 1-Wire implementation for the ds2780 chip
+ *
+ * Copyright (C) 2010 Indesign, LLC
+ *
+ * Author: Clifton Barnes <cabarnes@indesign-llc.com>
+ *
+ * Based on w1-ds2760 driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _W1_DS2780_H
+#define _W1_DS2780_H
+
+/* Function commands */
+#define W1_DS2780_READ_DATA 0x69
+#define W1_DS2780_WRITE_DATA 0x6C
+#define W1_DS2780_COPY_DATA 0x48
+#define W1_DS2780_RECALL_DATA 0xB8
+#define W1_DS2780_LOCK 0x6A
+
+/* Register map */
+/* Register 0x00 Reserved */
+#define DS2780_STATUS_REG 0x01
+#define DS2780_RAAC_MSB_REG 0x02
+#define DS2780_RAAC_LSB_REG 0x03
+#define DS2780_RSAC_MSB_REG 0x04
+#define DS2780_RSAC_LSB_REG 0x05
+#define DS2780_RARC_REG 0x06
+#define DS2780_RSRC_REG 0x07
+#define DS2780_IAVG_MSB_REG 0x08
+#define DS2780_IAVG_LSB_REG 0x09
+#define DS2780_TEMP_MSB_REG 0x0A
+#define DS2780_TEMP_LSB_REG 0x0B
+#define DS2780_VOLT_MSB_REG 0x0C
+#define DS2780_VOLT_LSB_REG 0x0D
+#define DS2780_CURRENT_MSB_REG 0x0E
+#define DS2780_CURRENT_LSB_REG 0x0F
+#define DS2780_ACR_MSB_REG 0x10
+#define DS2780_ACR_LSB_REG 0x11
+#define DS2780_ACRL_MSB_REG 0x12
+#define DS2780_ACRL_LSB_REG 0x13
+#define DS2780_AS_REG 0x14
+#define DS2780_SFR_REG 0x15
+#define DS2780_FULL_MSB_REG 0x16
+#define DS2780_FULL_LSB_REG 0x17
+#define DS2780_AE_MSB_REG 0x18
+#define DS2780_AE_LSB_REG 0x19
+#define DS2780_SE_MSB_REG 0x1A
+#define DS2780_SE_LSB_REG 0x1B
+/* Register 0x1C - 0x1E Reserved */
+#define DS2780_EEPROM_REG 0x1F
+#define DS2780_EEPROM_BLOCK0_START 0x20
+/* Register 0x20 - 0x2F User EEPROM */
+#define DS2780_EEPROM_BLOCK0_END 0x2F
+/* Register 0x30 - 0x5F Reserved */
+#define DS2780_EEPROM_BLOCK1_START 0x60
+#define DS2780_CONTROL_REG 0x60
+#define DS2780_AB_REG 0x61
+#define DS2780_AC_MSB_REG 0x62
+#define DS2780_AC_LSB_REG 0x63
+#define DS2780_VCHG_REG 0x64
+#define DS2780_IMIN_REG 0x65
+#define DS2780_VAE_REG 0x66
+#define DS2780_IAE_REG 0x67
+#define DS2780_AE_40_REG 0x68
+#define DS2780_RSNSP_REG 0x69
+#define DS2780_FULL_40_MSB_REG 0x6A
+#define DS2780_FULL_40_LSB_REG 0x6B
+#define DS2780_FULL_3040_SLOPE_REG 0x6C
+#define DS2780_FULL_2030_SLOPE_REG 0x6D
+#define DS2780_FULL_1020_SLOPE_REG 0x6E
+#define DS2780_FULL_0010_SLOPE_REG 0x6F
+#define DS2780_AE_3040_SLOPE_REG 0x70
+#define DS2780_AE_2030_SLOPE_REG 0x71
+#define DS2780_AE_1020_SLOPE_REG 0x72
+#define DS2780_AE_0010_SLOPE_REG 0x73
+#define DS2780_SE_3040_SLOPE_REG 0x74
+#define DS2780_SE_2030_SLOPE_REG 0x75
+#define DS2780_SE_1020_SLOPE_REG 0x76
+#define DS2780_SE_0010_SLOPE_REG 0x77
+#define DS2780_RSGAIN_MSB_REG 0x78
+#define DS2780_RSGAIN_LSB_REG 0x79
+#define DS2780_RSTC_REG 0x7A
+#define DS2780_FRSGAIN_MSB_REG 0x7B
+#define DS2780_FRSGAIN_LSB_REG 0x7C
+#define DS2780_EEPROM_BLOCK1_END 0x7C
+/* Register 0x7D - 0xFF Reserved */
+
+/* Number of valid register addresses */
+#define DS2780_DATA_SIZE 0x80
+
+/* Status register bits */
+#define DS2780_STATUS_REG_CHGTF (1 << 7)
+#define DS2780_STATUS_REG_AEF (1 << 6)
+#define DS2780_STATUS_REG_SEF (1 << 5)
+#define DS2780_STATUS_REG_LEARNF (1 << 4)
+/* Bit 3 Reserved */
+#define DS2780_STATUS_REG_UVF (1 << 2)
+#define DS2780_STATUS_REG_PORF (1 << 1)
+/* Bit 0 Reserved */
+
+/* Control register bits */
+/* Bit 7 Reserved */
+#define DS2780_CONTROL_REG_UVEN (1 << 6)
+#define DS2780_CONTROL_REG_PMOD (1 << 5)
+#define DS2780_CONTROL_REG_RNAOP (1 << 4)
+/* Bit 0 - 3 Reserved */
+
+/* Special feature register bits */
+/* Bit 1 - 7 Reserved */
+#define DS2780_SFR_REG_PIOSC (1 << 0)
+
+/* EEPROM register bits */
+#define DS2780_EEPROM_REG_EEC (1 << 7)
+#define DS2780_EEPROM_REG_LOCK (1 << 6)
+/* Bit 2 - 6 Reserved */
+#define DS2780_EEPROM_REG_BL1 (1 << 1)
+#define DS2780_EEPROM_REG_BL0 (1 << 0)
+
+extern int w1_ds2780_io(struct device *dev, char *buf, int addr, size_t count,
+ int io);
+extern int w1_ds2780_eeprom_cmd(struct device *dev, int addr, int cmd);
+
+#endif /* !_W1_DS2780_H */
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h
index f3b636d..e76125c 100644
--- a/drivers/w1/w1_family.h
+++ b/drivers/w1/w1_family.h
@@ -36,6 +36,7 @@
#define W1_THERM_DS18B20 0x28
#define W1_EEPROM_DS2431 0x2D
#define W1_FAMILY_DS2760 0x30
+#define W1_FAMILY_DS2780 0x32

#define MAXNAMELEN 32

--
1.7.3.4



\
 
 \ /
  Last update: 2011-05-19 14:23    [from the cache]
©2003-2011 Jasper Spaans