lkml.org 
[lkml]   [2011]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/4] REGULATOR: TWL6025: add support to twl-regulator
On 16/05/2011 10:08, T Krishnamoorthy, Balaji wrote:
> On Thu, May 12, 2011 at 6:57 PM, Graeme Gregory <gg@slimlogic.co.uk> wrote:
>> Adding support for the twl6025. Major difference in the twl6025 is the
>> group functionality has been removed from the chip so this affects how
>> regulators are enabled and disabled.
>>
>> The names of the regulators also changed.
>>
>> The DCDCs of the 6025 are software controllable as well.
>>
>> Since V1
>>
>> Use the features variable passed via platform data instead of calling
>> global function.
>>
>> Change the very switch like if statements to be a more readable
>> switch statement.
>>
>> Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk>
>> ---
>> drivers/regulator/twl-regulator.c | 414 +++++++++++++++++++++++++++++++++---
>> 1 files changed, 379 insertions(+), 35 deletions(-)
>>
>> diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
>> index 2a808c2..51f28cc 100644
>> --- a/drivers/regulator/twl-regulator.c
>> +++ b/drivers/regulator/twl-regulator.c
>> @@ -51,8 +51,13 @@ struct twlreg_info {
>> u16 min_mV;
>> u16 max_mV;
>>
>> + u8 flags;
>> +
>> /* used by regulator core */
>> struct regulator_desc desc;
>> +
>> + /* chip specific features */
>> + unsigned long features;
>> };
>>
>>
>> @@ -70,6 +75,7 @@ struct twlreg_info {
>> #define VREG_TRANS 1
>> #define VREG_STATE 2
>> #define VREG_VOLTAGE 3
>> +#define VREG_VOLTAGE_DCDC 4
>> /* TWL6030 Misc register offsets */
>> #define VREG_BC_ALL 1
>> #define VREG_BC_REF 2
>> @@ -87,6 +93,17 @@ struct twlreg_info {
>> #define TWL6030_CFG_STATE_APP(v) (((v) & TWL6030_CFG_STATE_APP_MASK) >>\
>> TWL6030_CFG_STATE_APP_SHIFT)
>>
>> +/* Flags for DCDC Voltage reading */
>> +#define DCDC_OFFSET_EN BIT(0)
>> +#define DCDC_EXTENDED_EN BIT(1)
>> +
>> +/* twl6025 SMPS EPROM values */
>> +#define TWL6030_SMPS_OFFSET 0xB0
>> +#define TWL6030_SMPS_MULT 0xB3
>> +#define SMPS_MULTOFFSET_SMPS4 BIT(0)
>> +#define SMPS_MULTOFFSET_VIO BIT(1)
>> +#define SMPS_MULTOFFSET_SMPS3 BIT(6)
>> +
>> static inline int
>> twlreg_read(struct twlreg_info *info, unsigned slave_subgp, unsigned offset)
>> {
>> @@ -144,11 +161,15 @@ static int twl6030reg_is_enabled(struct regulator_dev *rdev)
>> struct twlreg_info *info = rdev_get_drvdata(rdev);
>> int grp, val;
>>
>> - grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
>> - if (grp < 0)
>> - return grp;
>> + if (!(info->features & TWL6025_SUBCLASS)) {
>> + grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
>> + if (grp < 0)
>> + return grp;
>>
>> - grp &= P1_GRP_6030;
>> + grp &= P1_GRP_6030;
>> + } else {
>> + grp = 1;
>> + }
>>
>> val = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_STATE);
>> val = TWL6030_CFG_STATE_APP(val);
>> @@ -159,19 +180,22 @@ static int twl6030reg_is_enabled(struct regulator_dev *rdev)
>> static int twlreg_enable(struct regulator_dev *rdev)
>> {
>> struct twlreg_info *info = rdev_get_drvdata(rdev);
>> - int grp;
>> - int ret;
>> + int grp = 0;
>> + int ret = 0;
>>
>> - grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
>> - if (grp < 0)
>> - return grp;
>> + if (!(twl_class_is_6030() && (info->features & TWL6025_SUBCLASS))) {
>> + grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
>> + if (grp < 0)
>> + return grp;
>>
>> - if (twl_class_is_4030())
>> - grp |= P1_GRP_4030;
>> - else
>> - grp |= P1_GRP_6030;
>> + if (twl_class_is_4030())
>> + grp |= P1_GRP_4030;
>> + else
>> + grp |= P1_GRP_6030;
>>
>> - ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
>> + ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER,
>> + VREG_GRP, grp);
>> + }
>>
>> if (!ret && twl_class_is_6030())
>> ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE,
>> @@ -186,29 +210,34 @@ static int twlreg_enable(struct regulator_dev *rdev)
>> static int twlreg_disable(struct regulator_dev *rdev)
>> {
>> struct twlreg_info *info = rdev_get_drvdata(rdev);
>> - int grp;
>> - int ret;
>> -
>> - grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
>> - if (grp < 0)
>> - return grp;
>> -
>> - /* For 6030, set the off state for all grps enabled */
>> - if (twl_class_is_6030()) {
>> - ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE,
>> - (grp & (P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030)) <<
>> - TWL6030_CFG_STATE_GRP_SHIFT |
>> - TWL6030_CFG_STATE_OFF);
>> + int grp = 0;
>> + int ret = 0;
>> +
>> + if (!(twl_class_is_6030() && (info->features & TWL6025_SUBCLASS))) {
>> + grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
>> + if (grp < 0)
>> + return grp;
>> +
>> + /* For 6030, set the off state for all grps enabled */
>> + if (twl_class_is_6030()) {
>> + ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER,
>> + VREG_STATE,
>> + (grp & (P1_GRP_6030 | P2_GRP_6030 |
>> + P3_GRP_6030)) <<
>> + TWL6030_CFG_STATE_GRP_SHIFT |
>> + TWL6030_CFG_STATE_OFF);
>> if (ret)
>> return ret;
>> - }
>> + }
>>
>> - if (twl_class_is_4030())
>> - grp &= ~(P1_GRP_4030 | P2_GRP_4030 | P3_GRP_4030);
>> - else
>> - grp &= ~(P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030);
>> + if (twl_class_is_4030())
>> + grp &= ~(P1_GRP_4030 | P2_GRP_4030 | P3_GRP_4030);
>> + else
>> + grp &= ~(P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030);
>>
>> - ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
>> + ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER,
>> + VREG_GRP, grp);
>> + }
>>
>> /* Next, associate cleared grp in state register */
>> if (!ret && twl_class_is_6030())
>> @@ -299,10 +328,11 @@ static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
>> static int twl6030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
>> {
>> struct twlreg_info *info = rdev_get_drvdata(rdev);
>> - int grp;
>> + int grp = 0;
>> int val;
>>
>> - grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
>> + if (!(twl_class_is_6030() && (info->features & TWL6025_SUBCLASS)))
>> + grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
>>
>> if (grp < 0)
>> return grp;
>> @@ -594,6 +624,230 @@ static struct regulator_ops twl6030_fixed_resource = {
>> .get_status = twl6030reg_get_status,
>> };
>>
>> +/*
>> + * DCDC status and control
>> + */
>> +
> <snip>
>
>> +
>> +static struct regulator_ops twldcdc_ops = {
>> + .list_voltage = twl6030dcdc_list_voltage,
>> +
>> + .set_voltage = twl6030dcdc_set_voltage,
>> + .get_voltage_sel = twl6030dcdc_get_voltage_sel,
> These 3 dcdc related function is specific to twl6025, could you please rename it
>
I beleive they should be applicable to all twl6030 series regulators.
The DCDCs are just not currently in use by twl6030 part of the driver. I
have no hardware to verify funtion here either. But as I beleive they
are generic for the series Id prefer to keep the name as is.

>> +
>> + .enable = twlreg_enable,
>> + .disable = twlreg_disable,
>> + .is_enabled = twl6030reg_is_enabled,
>> +
>> + .set_mode = twl6030reg_set_mode,
>> +
>> + .get_status = twl6030reg_get_status,
> Can you define separate twl6025 specific regulator enable/disable/is_enabled
> /set_mode and get_status function
> This can improve readability, reduce the number of if
> and improves maintainability of previous twl chips
>
Word from my discussions with the regulator maintainer on this is he
would prefer them to remain as they are.
>> +};
>> +
>> /*----------------------------------------------------------------------*/
>>
>> #define TWL4030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
>> @@ -636,6 +890,22 @@ static struct regulator_ops twl6030_fixed_resource = {
>> }, \
>> }
>>
>> +#define TWL6025_ADJUSTABLE_LDO(label, offset, min_mVolts, max_mVolts, num, \
>> + remap_conf) { \
>> + .base = offset, \
>> + .id = num, \
>> + .min_mV = min_mVolts, \
>> + .max_mV = max_mVolts, \
>> + .remap = remap_conf, \
>> + .desc = { \
>> + .name = #label, \
>> + .id = TWL6025_REG_##label, \
>> + .n_voltages = ((max_mVolts - min_mVolts)/100) + 1, \
>> + .ops = &twl6030ldo_ops, \
>> + .type = REGULATOR_VOLTAGE, \
>> + .owner = THIS_MODULE, \
>> + }, \
>> + }
>>
>> #define TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, remap_conf, \
>> family, operations) { \
>> @@ -667,6 +937,23 @@ static struct regulator_ops twl6030_fixed_resource = {
>> }, \
>> }
>>
>> +#define TWL6025_ADJUSTABLE_DCDC(label, offset, num, \
>> + remap_conf) { \
>> + .base = offset, \
>> + .id = num, \
>> + .min_mV = 600, \
>> + .max_mV = 2100, \
>> + .remap = remap_conf, \
> remap is not used for twl6025?
>
It is not, this is a merge error on my part between different versions,
I shall produce a v3 of the regulator patch to remove this.

>> + .desc = { \
>> + .name = #label, \
>> + .id = TWL6025_REG_##label, \
>> + .n_voltages = 63, \

Thanks

Graeme



\
 
 \ /
  Last update: 2011-05-18 16:19    [W:0.080 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site