lkml.org 
[lkml]   [2011]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] hwmon: Add driver for AMD family 15h processor power information
On Tue, Apr 05, 2011 at 10:45:36AM -0400, Andreas Herrmann wrote:
> From: Andreas Herrmann <andreas.herrmann3@amd.com>
>
> This CPU family provides NB register values to gather following
> TDP information
>
> * ProcessorPwrWatts: Specifies in Watts the maximum amount of power
> the processor can support.
> * CurrPwrWatts: Specifies in Watts the current amount of power being
> consumed by the processor.
>
> This driver provides
>
> * power1_cap (ProcessorPwrWatts)

Hi Andreas,

What does the CPU do if ProcessorPwrWatts is reached ? Does it start to limit
power consumption, ie does it enforce the limit ?

If not you might want to use power1_max instead.

> * power1_input (CurrPwrWatts)
>
> Changes from v1::
> - removed deprecated code line,
> - fixed comment,
> - report power only once per socket (Power information is provided
> for the entire package. On multi-node processors it should only be
> reported on internal node 0.)
>
> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
> ---
> drivers/hwmon/Kconfig | 10 ++
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/f15h_power.c | 216 ++++++++++++++++++++++++++++++++++++++++++++

Please also add Documentation/hwmon/f15h_power.

> 3 files changed, 227 insertions(+), 0 deletions(-)
> create mode 100644 drivers/hwmon/f15h_power.c
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 8e84b31..0268623 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -249,6 +249,16 @@ config SENSORS_K10TEMP
> This driver can also be built as a module. If so, the module
> will be called k10temp.
>
> +config SENSORS_F15H_POWER
> + tristate "AMD Family 15h processor power"
> + depends on X86 && PCI
> + help
> + If you say yes here you get support for processor power
> + information of your AMD family 15h CPU.
> +
> + This driver can also be built as a module. If so, the module
> + will be called f15hpower.

f15h_power

> +
> config SENSORS_ASB100
> tristate "Asus ASB100 Bach"
> depends on X86 && I2C && EXPERIMENTAL
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index dde02d9..e554b88 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -62,6 +62,7 @@ obj-$(CONFIG_SENSORS_JC42) += jc42.o
> obj-$(CONFIG_SENSORS_JZ4740) += jz4740-hwmon.o
> obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
> obj-$(CONFIG_SENSORS_K10TEMP) += k10temp.o
> +obj-$(CONFIG_SENSORS_F15H_POWER) += f15h_power.o
> obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o
> obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d.o lis3lv02d_spi.o
> obj-$(CONFIG_SENSORS_LIS3_I2C) += lis3lv02d.o lis3lv02d_i2c.o
> diff --git a/drivers/hwmon/f15h_power.c b/drivers/hwmon/f15h_power.c
> new file mode 100644
> index 0000000..40e3cbd
> --- /dev/null
> +++ b/drivers/hwmon/f15h_power.c
> @@ -0,0 +1,216 @@
> +/*
> + * f15h_power.c - AMD Family 15h processor power monitoring
> + *
> + * Copyright (c) 2011 Advanced Micro Devices, Inc.
> + * Author: Andreas Herrmann <andreas.herrmann3@amd.com>
> + *
> + *
> + * This driver is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License; either
> + * version 2 of the License, or (at your option) any later version.
> + *
> + * This driver is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> + * See the GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this driver; if not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/pci.h>
> +#include <linux/bitops.h>
> +#include <asm/processor.h>
> +
> +MODULE_DESCRIPTION("AMD Family 15h CPU processor power monitor");
> +MODULE_AUTHOR("Andreas Herrmann <andreas.herrmann3@amd.com>");
> +MODULE_LICENSE("GPL");
> +
> +/* D18F3 */
> +#define REG_NORTHBRIDGE_CAP 0xe8
> +
> +/* D18F4 */
> +#define REG_PROCESSOR_TDP 0x1b8
> +
> +/* D18F5 */
> +#define REG_TDP_RUNNING_AVERAGE 0xe0
> +#define REG_TDP_LIMIT3 0xe8
> +
> +static ssize_t show_power(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + u32 val, btdp, tdpl, tdp2w, arange;
> + s32 acap;
> + u64 ctdp;
> + struct pci_dev *f4 = to_pci_dev(dev);
> + struct pci_dev *f5;
> +
> + pci_read_config_dword(f4, REG_PROCESSOR_TDP, &val);
> + btdp = (val >> 16) & 0xffff;
> +
> + f5 = pci_get_slot(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5));
> + if (!f5) {
> + dev_err(dev, "no function 5 available on this slot\n");
> + return 0;
> + }

Unless this is a temporary error condition, you should check if this function
exists in the probe function, and not create a sysfs entry if it doesn't.

If it is a temporary error which needs a runtime check, you should return
a negative value to indicate that there was an error.

> +
> + pci_read_config_dword(f5, REG_TDP_RUNNING_AVERAGE, &val);
> + acap = (val >> 4) & 0x3fffff;
> + acap = sign_extend32(acap, 22);
> + arange = val & 0xf;
> +
> + pci_read_config_dword(f5, REG_TDP_LIMIT3, &val);
> + pci_dev_put(f5);
> +
> + tdpl = (val >> 16) & 0x1fff;
> + tdp2w = ((val & 0x3ff) << 6) | ((val >> 10) & 0x3f);
> + ctdp = tdpl - (s32)(acap >> (arange + 1)) + btdp;
> + ctdp *= tdp2w;
> +
> + /*
> + * Convert to microWatt
> + *
> + * power is in Watt provided as fixed point integer with
> + * scaling factor 1/(2^16). For conversion we use
> + * (10^6)/(2^16) = 15625/(2^10)
> + */
> + ctdp = (ctdp * 15625) >> 10;
> + return sprintf(buf, "%d\n", (u32) ctdp);

%u

> +}
> +static DEVICE_ATTR(power1_input, S_IRUGO, show_power, NULL);
> +
> +static ssize_t show_power_cap(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + u32 val, tdp2w;
> + u64 ptdp;
> + struct pci_dev *f4 = to_pci_dev(dev);
> + struct pci_dev *f5;
> +
> + pci_read_config_dword(f4, REG_PROCESSOR_TDP, &val);
> + ptdp = val & 0xffff;
> +
> + f5 = pci_get_slot(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5));
> + if (!f5) {
> + dev_err(dev, "no function 5 available on this slot\n");
> + return 0;
> + }
> +
Same as above - should be checked in probe function.

If it is a temporary error which needs a runtime check, you should return
a negative value to indicate that there was an error.

> + pci_read_config_dword(f5, REG_TDP_LIMIT3, &val);
> + pci_dev_put(f5);
> +
> + tdp2w = ((val & 0x3ff) << 6) | ((val >> 10) & 0x3f);
> + ptdp *= tdp2w;
> +
> + /* result not allowed to be >= 256W */
> + WARN_ON(ptdp>>16 >= 256);
> +
Does this really ask for such drastic measures, or would dev_warn() be sufficient ?

> + /* convert to microWatt */
> + ptdp = (ptdp * 15625) >> 10;
> + return sprintf(buf, "%d\n", (u32) ptdp);

%u

> +}
> +static DEVICE_ATTR(power1_cap, S_IRUGO, show_power_cap, NULL);
> +
> +static ssize_t show_name(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + return sprintf(buf, "f15h_power\n");
> +}
> +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
> +
> +static int __devinit f15h_power_is_internal_node0(struct pci_dev *f4)
> +{
> + u32 val;
> + struct pci_dev *f3;
> +
> + f3 = pci_get_slot(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 3));
> + if (!f3) {
> + dev_err(&f4->dev, "no function 3 available on this slot\n");
> + return 0;

It is a common practice to return a negative value on errors. Why not here ?
Also, is this really an error which asks for an error message, or just a CPU
or system which does not support the attribute ? In the latter case, you should
not display an error message.

> + }
> +
> + pci_read_config_dword(f3, REG_NORTHBRIDGE_CAP, &val);
> + pci_dev_put(f3);
> +
> + if ((val & BIT(29)) && ((val >> 30) & 3))
> + return 0;
> +
> + return 1;
> +}
> +
> +static int __devinit f15h_power_probe(struct pci_dev *pdev,
> + const struct pci_device_id *id)
> +{
> + struct device *hwmon_dev;
> + int err = -ENODEV;
> +
> + if (!f15h_power_is_internal_node0(pdev))
> + goto exit;
> +
> + err = device_create_file(&pdev->dev, &dev_attr_power1_input);
> + if (err)
> + goto exit;
> + err = device_create_file(&pdev->dev, &dev_attr_power1_cap);
> + if (err)
> + goto exit_remove;
> +
> + err = device_create_file(&pdev->dev, &dev_attr_name);
> + if (err)
> + goto exit_remove;
> +
> + hwmon_dev = hwmon_device_register(&pdev->dev);
> + if (IS_ERR(hwmon_dev)) {
> + err = PTR_ERR(hwmon_dev);
> + goto exit_remove;
> + }
> + dev_set_drvdata(&pdev->dev, hwmon_dev);
> +
> + return 0;
> +
> +exit_remove:
> + device_remove_file(&pdev->dev, &dev_attr_name);
> + device_remove_file(&pdev->dev, &dev_attr_power1_input);
> + device_remove_file(&pdev->dev, &dev_attr_power1_cap);
> +exit:
> + return err;
> +}
> +
> +static void __devexit f15h_power_remove(struct pci_dev *pdev)
> +{
> + hwmon_device_unregister(dev_get_drvdata(&pdev->dev));
> + device_remove_file(&pdev->dev, &dev_attr_name);
> + device_remove_file(&pdev->dev, &dev_attr_power1_input);
> + device_remove_file(&pdev->dev, &dev_attr_power1_cap);
> + dev_set_drvdata(&pdev->dev, NULL);
> +}
> +
> +static const struct pci_device_id f15h_power_id_table[] = {

checkpatch says:

WARNING: Use DEFINE_PCI_DEVICE_TABLE for struct pci_device_id
#326: FILE: drivers/hwmon/f15h_power.c:192:

Please fix.

> + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_LINK) },
> + {}
> +};
> +MODULE_DEVICE_TABLE(pci, f15h_power_id_table);
> +
> +static struct pci_driver f15h_power_driver = {
> + .name = "f15h_power",
> + .id_table = f15h_power_id_table,
> + .probe = f15h_power_probe,
> + .remove = __devexit_p(f15h_power_remove),
> +};
> +
> +static int __init f15h_power_init(void)
> +{
> + return pci_register_driver(&f15h_power_driver);
> +}
> +
> +static void __exit f15h_power_exit(void)
> +{
> + pci_unregister_driver(&f15h_power_driver);
> +}
> +
> +module_init(f15h_power_init)
> +module_exit(f15h_power_exit)
> --
> 1.7.3.1
>


\
 
 \ /
  Last update: 2011-04-05 22:15    [W:0.149 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site