lkml.org 
[lkml]   [2011]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRE: sata_mv port lockup on hotplug (kernel 2.6.38.2)
> > The 2.6.38.2 kernel still exhibits the same lockups that we see with the
> > 2.6.26 kernel.
>
> Okay. Just to help narrow it down a bit, how does 2.6.32 behave ?
>
> Thanks.

Hi Mark,

I have reproduced the issue with the 2.6.32 kernel.

In case it is of use, the silicon is rev 09 (i.e. C0 stepping) and I am using
gcc 4.4.2 to build the kernel and modules.

I am currently inserting tracing into 2.6.38.2 to try to work out what is going
on. From mv_write_main_irq_mask I can see that the IRQ for each port is still
enabled, even when ports stop responding. I see interrupts generated when I
hotplug or unplug disks on ports that are not locked up, but no interrupt is
generated at all for the ports that are locked (this is from tracing in
asm_do_IRQ in arch/arm/kernel/irq.c)

One thing I noticed was that there is no spinlock around the
mv_save_cached_regs/mv_edma_cfg in mv_hardreset (unlike mv_port_start and
mv_port_stop); why is this?


Kind Regards,

Bruce Stenning,
IndigoVision,
b <dot> stenning <at> indigovision <dot> com


Latest News at: http://www.indigovision.com/index.php/en/news.html
\
 
 \ /
  Last update: 2011-04-12 12:33    [W:0.238 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site