lkml.org 
[lkml]   [2011]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] [115/275] OHCI: work around for nVidia shutdown problem
Hello,

please see comment 33 in LP bug tracker:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/42149

Maybe there are problem with this patch on new nvidia HW.

2011/3/30 Andi Kleen <andi@firstfloor.org>:
> 2.6.35-longterm review patch.  If anyone has any objections, please let me know.
>
> ------------------
> From: Alan Stern <stern@rowland.harvard.edu>
>
> commit 3df7169e73fc1d71a39cffeacc969f6840cdf52b upstream.
>
> This patch (as1417) fixes a problem affecting some (or all) nVidia
> chipsets.  When the computer is shut down, the OHCI controllers
> continue to power the USB buses and evidently they drive a Reset
> signal out all their ports.  This prevents attached devices from going
> to low power.  Mouse LEDs stay on, for example, which is disconcerting
> for users and a drain on laptop batteries.
>
> The fix involves leaving each OHCI controller in the OPERATIONAL state
> during system shutdown rather than putting it in the RESET state.
> Although this nominally means the controller is running, in fact it's
> not doing very much since all the schedules are all disabled.  However
> there is ongoing DMA to the Host Controller Communications Area, so
> the patch also disables the bus-master capability of all PCI USB
> controllers after the shutdown routine runs.
>
> The fix is applied only to nVidia-based PCI OHCI controllers, so it
> shouldn't cause problems on systems using other hardware.  As an added
> safety measure, in case the kernel encounters one of these running
> controllers during boot, the patch changes quirk_usb_handoff_ohci()
> (which runs early on during PCI discovery) to reset the controller
> before anything bad can happen.
>
> Reported-by: Pali Rohár <pali.rohar@gmail.com>
> Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
> Signed-off-by: Andi Kleen <ak@linux.intel.com>
> CC: David Brownell <david-b@pacbell.net>
> Tested-by: Pali Rohár <pali.rohar@gmail.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
>
> ---
>  drivers/usb/core/hcd-pci.c    |    4 +++-
>  drivers/usb/host/ohci-hcd.c   |    9 ++++++++-
>  drivers/usb/host/ohci-pci.c   |   18 ++++++++++++++++++
>  drivers/usb/host/ohci.h       |    1 +
>  drivers/usb/host/pci-quirks.c |   18 +++++++++++-------
>  5 files changed, 41 insertions(+), 9 deletions(-)
>
> Index: linux-2.6.35.y/drivers/usb/core/hcd-pci.c
> ===================================================================
> --- linux-2.6.35.y.orig/drivers/usb/core/hcd-pci.c      2011-03-29 22:51:22.609144656 -0700
> +++ linux-2.6.35.y/drivers/usb/core/hcd-pci.c   2011-03-29 23:03:00.575285450 -0700
> @@ -317,8 +317,10 @@
>        if (!hcd)
>                return;
>
> -       if (hcd->driver->shutdown)
> +       if (hcd->driver->shutdown) {
>                hcd->driver->shutdown(hcd);
> +               pci_disable_device(dev);
> +       }
>  }
>  EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
>
> Index: linux-2.6.35.y/drivers/usb/host/ohci-hcd.c
> ===================================================================
> --- linux-2.6.35.y.orig/drivers/usb/host/ohci-hcd.c     2011-03-29 22:51:22.609144656 -0700
> +++ linux-2.6.35.y/drivers/usb/host/ohci-hcd.c  2011-03-29 23:03:00.576285425 -0700
> @@ -398,7 +398,14 @@
>
>        ohci = hcd_to_ohci (hcd);
>        ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
> -       ohci_usb_reset (ohci);
> +       ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
> +
> +       /* If the SHUTDOWN quirk is set, don't put the controller in RESET */
> +       ohci->hc_control &= (ohci->flags & OHCI_QUIRK_SHUTDOWN ?
> +                       OHCI_CTRL_RWC | OHCI_CTRL_HCFS :
> +                       OHCI_CTRL_RWC);
> +       ohci_writel(ohci, ohci->hc_control, &ohci->regs->control);
> +
>        /* flush the writes */
>        (void) ohci_readl (ohci, &ohci->regs->control);
>  }
> Index: linux-2.6.35.y/drivers/usb/host/ohci-pci.c
> ===================================================================
> --- linux-2.6.35.y.orig/drivers/usb/host/ohci-pci.c     2011-03-29 22:51:22.609144656 -0700
> +++ linux-2.6.35.y/drivers/usb/host/ohci-pci.c  2011-03-29 23:03:00.577285400 -0700
> @@ -201,6 +201,20 @@
>        return 0;
>  }
>
> +/* nVidia controllers continue to drive Reset signalling on the bus
> + * even after system shutdown, wasting power.  This flag tells the
> + * shutdown routine to leave the controller OPERATIONAL instead of RESET.
> + */
> +static int ohci_quirk_nvidia_shutdown(struct usb_hcd *hcd)
> +{
> +       struct ohci_hcd *ohci = hcd_to_ohci(hcd);
> +
> +       ohci->flags |= OHCI_QUIRK_SHUTDOWN;
> +       ohci_dbg(ohci, "enabled nVidia shutdown quirk\n");
> +
> +       return 0;
> +}
> +
>  /*
>  * The hardware normally enables the A-link power management feature, which
>  * lets the system lower the power consumption in idle states.
> @@ -332,6 +346,10 @@
>                PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
>                .driver_data = (unsigned long)ohci_quirk_amd700,
>        },
> +       {
> +               PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID),
> +               .driver_data = (unsigned long) ohci_quirk_nvidia_shutdown,
> +       },
>
>        /* FIXME for some of the early AMD 760 southbridges, OHCI
>         * won't work at all.  blacklist them.
> Index: linux-2.6.35.y/drivers/usb/host/ohci.h
> ===================================================================
> --- linux-2.6.35.y.orig/drivers/usb/host/ohci.h 2011-03-29 22:51:22.610144631 -0700
> +++ linux-2.6.35.y/drivers/usb/host/ohci.h      2011-03-29 23:03:00.578285374 -0700
> @@ -403,6 +403,7 @@
>  #define        OHCI_QUIRK_HUB_POWER    0x100                   /* distrust firmware power/oc setup */
>  #define        OHCI_QUIRK_AMD_ISO      0x200                   /* ISO transfers*/
>  #define        OHCI_QUIRK_AMD_PREFETCH 0x400                   /* pre-fetch for ISO transfer */
> +#define        OHCI_QUIRK_SHUTDOWN     0x800                   /* nVidia power bug */
>        // there are also chip quirks/bugs in init logic
>
>        struct work_struct      nec_work;       /* Worker for NEC quirk */
> Index: linux-2.6.35.y/drivers/usb/host/pci-quirks.c
> ===================================================================
> --- linux-2.6.35.y.orig/drivers/usb/host/pci-quirks.c   2011-03-29 22:51:22.610144631 -0700
> +++ linux-2.6.35.y/drivers/usb/host/pci-quirks.c        2011-03-29 23:03:00.579285348 -0700
> @@ -169,6 +169,7 @@
>  static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
>  {
>        void __iomem *base;
> +       u32 control;
>
>        if (!mmio_resource_enabled(pdev, 0))
>                return;
> @@ -177,10 +178,14 @@
>        if (base == NULL)
>                return;
>
> +       control = readl(base + OHCI_CONTROL);
> +
>  /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
> -#ifndef __hppa__
> -{
> -       u32 control = readl(base + OHCI_CONTROL);
> +#ifdef __hppa__
> +#define        OHCI_CTRL_MASK          (OHCI_CTRL_RWC | OHCI_CTRL_IR)
> +#else
> +#define        OHCI_CTRL_MASK          OHCI_CTRL_RWC
> +
>        if (control & OHCI_CTRL_IR) {
>                int wait_time = 500; /* arbitrary; 5 seconds */
>                writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
> @@ -194,13 +199,12 @@
>                        dev_warn(&pdev->dev, "OHCI: BIOS handoff failed"
>                                        " (BIOS bug?) %08x\n",
>                                        readl(base + OHCI_CONTROL));
> -
> -               /* reset controller, preserving RWC */
> -               writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL);
>        }
> -}
>  #endif
>
> +       /* reset controller, preserving RWC (and possibly IR) */
> +       writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL);
> +
>        /*
>         * disable interrupts
>         */
>



--
Pali Rohár
pali.rohar@gmail.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2011-03-31 07:57    [W:1.246 / U:0.048 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site