lkml.org 
[lkml]   [2011]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectCorrupted files after suspend to disk
From
Hi,

I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
running Linux 2.6.37.4.
After resuming from s2disk some files are corrupted.
But when I reboot my netbook everything seems good again.

When I saw the problem the first time the ls command segfaulted always.
I did a reboot and it worked again.

A few days later zypper crashed. After a reboot it worked again.
And today ssh crashed. I looked a bit closer and saw it crashed
somewhere within libcrypto.
So I made copy libcrypto and rebooted.
After the reboot ssh worked again but libcrypto and the copy of it hat
a different sha1 sum!
WTF?!

Is this a known issue?

dmesgs and config are attached.

The used distribution is openSUSE 11.4 with suspend-0.80.20100129-7.1
(default from suse).
I'm using ext3 as root filesystem.
What else do you need?

--
Thanks,
//richard
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.37.4-17-vanilla (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP 2011-03-15 00:05:21 +0100
[ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6d0000 - 000000003f6e2000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f6e2000 - 000000003f6e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f6e3000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: LENOVO 4329A11 /Kuril , BIOS 14CN88WW 03/20/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3f6d0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f7b70] f7b70
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ b1f000-c00000
[ 0.000000] RAMDISK: 37580000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 36b10000 - 3757f5fd
[ 0.000000] Move RAMDISK from 0000000037580000 - 0000000037fef5fc to 36b10000 - 3757f5fc
[ 0.000000] ACPI: RSDP 000f7a60 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 3f6da15b 0007C (v01 PTLTD ? XSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 3f6e1d4d 000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 3f6db355 06984 (v01 INTEL CALISTGA 06040000 INTL 20061109)
[ 0.000000] ACPI: FACS 3f6e2fc0 00040
[ 0.000000] ACPI: HPET 3f6e1e41 00038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 3f6e1e79 0003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TCPA 3f6e1eb5 00032 (v01 PTLTD CALISTGA 06040000 PTL 00000001)
[ 0.000000] ACPI: TMOR 3f6e1ee7 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: APIC 3f6e1f0d 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 3f6e1f75 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: ASF! 3f6e1f9d 00063 (v16 CETP CETP 06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 3f6da773 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3f6da6cd 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3f6da1d7 004F6 (v02 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f6d0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f6d0
[ 0.000000] On node 0 totalpages: 259679
[ 0.000000] free_area_init_node: node 0, pgdat c07d0700, node_mem_map f6320200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 254 pages used for memmap
[ 0.000000] HighMem zone: 32212 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f77df000 s27200 r0 d21952 u49152
[ 0.000000] pcpu-alloc: s27200 r0 d21952 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257649
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD1600BEVS-08VAT2_WD-WXE309PV6424-part1 resume=/dev/disk/by-id/ata-WDC_WD1600BEVS-08VAT2_WD-WXE309PV6424-part2 splash=silent quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5195520 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f6d0)
[ 0.000000] Memory: 1005564k/1039168k available (4024k kernel code, 33152k reserved, 1987k data, 428k init, 129864k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd35000 - 0xfffff000 (2856 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07e0000 - 0xc084b000 ( 428 kB)
[ 0.000000] .data : 0xc05ee0dc - 0xc07df028 (1987 kB)
[ 0.000000] .text : 0xc0200000 - 0xc05ee0dc (4024 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1595.635 MHz processor.
[ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.27 BogoMIPS (lpj=6382540)
[ 0.004020] pid_max: default: 32768 minimum: 301
[ 0.004107] Security Framework initialized
[ 0.004132] AppArmor: AppArmor initialized
[ 0.004255] Mount-cache hash table entries: 512
[ 0.004470] Initializing cgroup subsys ns
[ 0.004478] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.008012] Initializing cgroup subsys cpuacct
[ 0.008021] Initializing cgroup subsys memory
[ 0.008040] Initializing cgroup subsys devices
[ 0.008045] Initializing cgroup subsys freezer
[ 0.008050] Initializing cgroup subsys net_cls
[ 0.008056] Initializing cgroup subsys blkio
[ 0.008113] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.008122] CPU: Physical Processor ID: 0
[ 0.008126] CPU: Processor Core ID: 0
[ 0.008131] mce: CPU supports 5 MCE banks
[ 0.008146] CPU0: Thermal monitoring enabled (TM1)
[ 0.008153] using mwait in idle threads.
[ 0.008165] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.008181] ... version: 3
[ 0.008184] ... bit width: 40
[ 0.008188] ... generic registers: 2
[ 0.008192] ... value mask: 000000ffffffffff
[ 0.008197] ... max period: 000000007fffffff
[ 0.008201] ... fixed-purpose events: 3
[ 0.008204] ... event mask: 0000000700000003
[ 0.008769] ACPI: Core revision 20101013
[ 0.028122] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028533] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068350] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.072000] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.072000] CPU 1 irqstacks, hard=f58cc000 soft=f58ce000
[ 0.072000] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.164059] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.164140] Brought up 2 CPUs
[ 0.164149] Total of 2 processors activated (6383.20 BogoMIPS).
[ 0.164474] devtmpfs: initialized
[ 0.164474] regulator: core version 0.5
[ 0.164474] regulator: dummy:
[ 0.164474] Time: 9:25:20 Date: 03/17/11
[ 0.164552] NET: Registered protocol family 16
[ 0.164935] ACPI: bus type pci registered
[ 0.165115] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.165125] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.165130] PCI: Using MMCONFIG for extended config space
[ 0.165135] PCI: Using configuration type 1 for base access
[ 0.168072] bio: create slab <bio-0> at 0
[ 0.172111] ACPI: EC: Look up EC in DSDT
[ 0.181791] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.184011] ACPI: SSDT 3f6db03c 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.184814] ACPI: Dynamic OEM Table Load:
[ 0.184823] ACPI: SSDT (null) 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.185516] ACPI: SSDT 3f6da9d2 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.186259] ACPI: Dynamic OEM Table Load:
[ 0.186267] ACPI: SSDT (null) 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.187210] ACPI: SSDT 3f6db281 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.188011] ACPI: Dynamic OEM Table Load:
[ 0.188020] ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.188371] ACPI: SSDT 3f6dafb7 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.189117] ACPI: Dynamic OEM Table Load:
[ 0.189125] ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.192333] ACPI: Interpreter enabled
[ 0.192348] ACPI: (supports S0 S3 S4 S5)
[ 0.192403] ACPI: Using IOAPIC for interrupt routing
[ 0.215300] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.215790] ACPI: No dock devices found.
[ 0.215801] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.217253] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.220082] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.220090] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.220097] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.220104] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.220113] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.220122] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff]
[ 0.220154] pci 0000:00:00.0: [8086:27ac] type 0 class 0x000600
[ 0.220223] pci 0000:00:02.0: [8086:27ae] type 0 class 0x000300
[ 0.220240] pci 0000:00:02.0: reg 10: [mem 0xf0500000-0xf057ffff]
[ 0.220252] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.220263] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.220275] pci 0000:00:02.0: reg 1c: [mem 0xf0600000-0xf063ffff]
[ 0.220326] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
[ 0.220341] pci 0000:00:02.1: reg 10: [mem 0xf0580000-0xf05fffff]
[ 0.220468] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.220500] pci 0000:00:1b.0: reg 10: [mem 0xf0640000-0xf0643fff 64bit]
[ 0.220602] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.220611] pci 0000:00:1b.0: PME# disabled
[ 0.220651] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.220755] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.220764] pci 0000:00:1c.0: PME# disabled
[ 0.220809] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.220914] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.220923] pci 0000:00:1c.1: PME# disabled
[ 0.220965] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.221068] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.221077] pci 0000:00:1c.2: PME# disabled
[ 0.221125] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.221196] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.221252] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.221322] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.221379] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.221449] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.221505] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.221575] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.221646] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.221678] pci 0000:00:1d.7: reg 10: [mem 0xf0844000-0xf08443ff]
[ 0.221790] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.221799] pci 0000:00:1d.7: PME# disabled
[ 0.221833] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.221940] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[ 0.222057] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.222066] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.222079] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0380 (mask 0007)
[ 0.222133] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[ 0.222156] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.222174] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.222192] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.222210] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.222229] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
[ 0.222292] pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
[ 0.222319] pci 0000:00:1f.2: reg 10: [io 0x18c8-0x18cf]
[ 0.222336] pci 0000:00:1f.2: reg 14: [io 0x18c0-0x18c3]
[ 0.222353] pci 0000:00:1f.2: reg 18: [io 0x18a8-0x18af]
[ 0.222371] pci 0000:00:1f.2: reg 1c: [io 0x180c-0x180f]
[ 0.222388] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf]
[ 0.222405] pci 0000:00:1f.2: reg 24: [mem 0xf0844400-0xf08447ff]
[ 0.222450] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.222459] pci 0000:00:1f.2: PME# disabled
[ 0.222495] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.222574] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff]
[ 0.222811] pci 0000:02:00.0: [14e4:1713] type 0 class 0x000200
[ 0.222887] pci 0000:02:00.0: reg 10: [mem 0xf0200000-0xf020ffff 64bit]
[ 0.223207] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.223223] pci 0000:02:00.0: PME# disabled
[ 0.223371] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.223380] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.223389] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.223403] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.223483] pci 0000:00:1c.1: PCI bridge to [bus 03-04]
[ 0.223492] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.223501] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.223514] pci 0000:00:1c.1: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.223846] pci 0000:05:00.0: [14e4:4315] type 0 class 0x000280
[ 0.223922] pci 0000:05:00.0: reg 10: [mem 0xf0400000-0xf0403fff 64bit]
[ 0.224237] pci 0000:05:00.0: supports D1 D2
[ 0.224243] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.224258] pci 0000:05:00.0: PME# disabled
[ 0.224450] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.224460] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
[ 0.224470] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.224483] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.224583] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.224592] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.224602] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.224615] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.224622] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.224629] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.224636] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.224643] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.224650] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.224657] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[ 0.224693] pci_bus 0000:00: on NUMA node 0
[ 0.224705] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.225140] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.225302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.225455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.225669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.239330] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.239522] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15)
[ 0.239706] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.239893] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.240106] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.240302] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.240488] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.240671] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.240750] HEST: Table is not found!
[ 0.240908] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.240929] vgaarb: loaded
[ 0.241358] SCSI subsystem initialized
[ 0.241471] PCI: Using ACPI for IRQ routing
[ 0.241471] PCI: pci_cache_line_size set to 64 bytes
[ 0.241471] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.241471] reserve RAM buffer: 000000003f6d0000 - 000000003fffffff
[ 0.241471] NetLabel: Initializing
[ 0.241471] NetLabel: domain hash size = 128
[ 0.241471] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.241471] NetLabel: unlabeled traffic allowed by default
[ 0.241471] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.241471] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.241471] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.248063] Switching to clocksource tsc
[ 0.250487] AppArmor: AppArmor Filesystem Enabled
[ 0.250522] pnp: PnP ACPI init
[ 0.250583] ACPI: bus type pnp registered
[ 0.254281] pnp 00:00: [bus 00-ff]
[ 0.254290] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.254296] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.254302] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.254308] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.254314] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.254320] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.254326] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.254332] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.254338] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.254345] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.254351] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.254357] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.254363] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.254369] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.254375] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.254381] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.254387] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.254393] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[ 0.254400] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.254556] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.254645] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.254652] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.254657] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.254663] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.254669] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.254674] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.254680] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.254685] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.254814] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.255406] pnp 00:02: [io 0x0000-0x001f]
[ 0.255412] pnp 00:02: [io 0x0081-0x0091]
[ 0.255418] pnp 00:02: [io 0x0093-0x009f]
[ 0.255423] pnp 00:02: [io 0x00c0-0x00df]
[ 0.255429] pnp 00:02: [dma 4]
[ 0.255531] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.255809] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.255955] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.256002] pnp 00:04: [io 0x00f0]
[ 0.256022] pnp 00:04: [irq 13]
[ 0.256129] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.256169] pnp 00:05: [io 0x0061]
[ 0.256174] pnp 00:05: [io 0x0063]
[ 0.256179] pnp 00:05: [io 0x0065]
[ 0.256184] pnp 00:05: [io 0x0067]
[ 0.256189] pnp 00:05: [io 0x0070]
[ 0.256194] pnp 00:05: [io 0x0080]
[ 0.256199] pnp 00:05: [io 0x0092]
[ 0.256204] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.256209] pnp 00:05: [io 0x0800-0x080f]
[ 0.256214] pnp 00:05: [io 0x1000-0x107f]
[ 0.256219] pnp 00:05: [io 0x1180-0x11bf]
[ 0.256225] pnp 00:05: [io 0x1640-0x164f]
[ 0.256230] pnp 00:05: [io 0xfe00]
[ 0.256235] pnp 00:05: [io 0x0380-0x0384]
[ 0.256240] pnp 00:05: [io 0x0386-0x0387]
[ 0.256400] pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.256486] pnp 00:06: [io 0x06a0-0x06af]
[ 0.256492] pnp 00:06: [io 0x06b0-0x06ff]
[ 0.256620] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.256654] pnp 00:07: [io 0x0070-0x0077]
[ 0.256668] pnp 00:07: [irq 8]
[ 0.256775] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.256856] pnp 00:08: [io 0x0060]
[ 0.256862] pnp 00:08: [io 0x0064]
[ 0.256874] pnp 00:08: [irq 1]
[ 0.256988] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.257027] pnp 00:09: [irq 12]
[ 0.257149] pnp 00:09: Plug and Play ACPI device, IDs SYN1024 SYN1000 SYN0002 PNP0f13 (active)
[ 0.257227] pnp: PnP ACPI: found 10 devices
[ 0.257232] ACPI: ACPI bus type pnp unregistered
[ 0.257240] PnPBIOS: Disabled by ACPI PNP
[ 0.257266] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.257274] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.257281] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.257289] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.257296] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.257303] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.257310] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.257318] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.257332] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.257347] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.257354] system 00:05: [io 0x1000-0x107f] has been reserved
[ 0.257361] system 00:05: [io 0x1180-0x11bf] has been reserved
[ 0.257368] system 00:05: [io 0x1640-0x164f] has been reserved
[ 0.257375] system 00:05: [io 0xfe00] has been reserved
[ 0.257381] system 00:05: [io 0x0380-0x0384] has been reserved
[ 0.257388] system 00:05: [io 0x0386-0x0387] has been reserved
[ 0.257401] system 00:06: [io 0x06a0-0x06af] has been reserved
[ 0.257407] system 00:06: [io 0x06b0-0x06ff] has been reserved
[ 0.297706] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.297719] pci 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.297727] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.297735] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.297746] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.297756] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.297769] pci 0000:00:1c.1: PCI bridge to [bus 03-04]
[ 0.297776] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.297787] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.297797] pci 0000:00:1c.1: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.297810] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.297817] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.297828] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.297838] pci 0000:00:1c.2: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.297850] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.297855] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.297864] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.297873] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.297918] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.297929] pci 0000:00:1c.0: setting latency timer to 64
[ 0.297951] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.297960] pci 0000:00:1c.1: setting latency timer to 64
[ 0.297988] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.297998] pci 0000:00:1c.2: setting latency timer to 64
[ 0.298014] pci 0000:00:1e.0: setting latency timer to 64
[ 0.298023] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.298030] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.298036] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.298042] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.298049] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.298055] pci_bus 0000:00: resource 9 [mem 0x40000000-0xfebfffff]
[ 0.298062] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.298068] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.298075] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.298082] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.298088] pci_bus 0000:03: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.298095] pci_bus 0000:03: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.298102] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.298108] pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.298115] pci_bus 0000:05: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.298122] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.298128] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.298134] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.298140] pci_bus 0000:06: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.298146] pci_bus 0000:06: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.298153] pci_bus 0000:06: resource 9 [mem 0x40000000-0xfebfffff]
[ 0.298299] NET: Registered protocol family 2
[ 0.298464] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.299134] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.300190] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.300691] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.300698] TCP reno registered
[ 0.300709] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.300730] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.301060] NET: Registered protocol family 1
[ 0.301107] pci 0000:00:02.0: Boot video device
[ 0.301515] PCI: CLS 64 bytes, default 64
[ 0.301633] Unpacking initramfs...
[ 0.776017] Freeing initrd memory: 10688k freed
[ 0.787103] Simple Boot Flag at 0x36 set to 0x1
[ 0.787929] Scanning for low memory corruption every 60 seconds
[ 0.788312] audit: initializing netlink socket (disabled)
[ 0.788338] type=2000 audit(1300353920.784:1): initialized
[ 0.818293] highmem bounce pool size: 64 pages
[ 0.818306] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.818719] VFS: Disk quotas dquot_6.5.2
[ 0.818795] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.819110] msgmni has been set to 1731
[ 0.819528] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.819586] io scheduler noop registered
[ 0.819593] io scheduler deadline registered
[ 0.819640] io scheduler cfq registered (default)
[ 0.820298] intel_idle: MWAIT substates: 0x20220
[ 0.820320] intel_idle: v0.4 model 0x1C
[ 0.820325] intel_idle: lapic_timer_reliable_states 0x2
[ 0.820344] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.820429] ERST: Table is not found!
[ 0.820470] isapnp: Scanning for PnP cards...
[ 1.174278] isapnp: No Plug & Play device found
[ 1.174811] Switching to clocksource hpet
[ 1.175099] Non-volatile memory driver v1.3
[ 1.175106] Linux agpgart interface v0.103
[ 1.175323] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.175514] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.175682] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.179409] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.179606] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.217681] Fixed MDIO Bus: probed
[ 1.217807] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.229330] Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 1.229336] If AUX port is really absent please use the 'i8042.noaux' option.
[ 1.242545] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.242562] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.242825] mice: PS/2 mouse device common for all mice
[ 1.244179] cpuidle: using governor ladder
[ 1.244452] cpuidle: using governor menu
[ 1.245034] TCP cubic registered
[ 1.245192] NET: Registered protocol family 10
[ 1.245956] lo: Disabled Privacy Extensions
[ 1.246460] Registering the dns_resolver key type
[ 1.246604] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5)
[ 1.246632] Using IPI No-Shortcut mode
[ 1.246915] PM: Checking hibernation image partition /dev/disk/by-id/ata-WDC_WD1600BEVS-08VAT2_WD-WXE309PV6424-part2
[ 1.265574] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.278930] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
[ 2.351301] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
[ 2.356214] PM: Hibernation image not present or could not be loaded.
[ 2.356285] registered taskstats version 1
[ 2.357115] Magic number: 3:585:424
[ 2.357393] Freeing unused kernel memory: 428k freed
[ 2.357758] Write protecting the kernel text: 4028k
[ 2.357831] Write protecting the kernel read-only data: 1732k
[ 2.463222] ACPI: acpi_idle yielding to intel_idle
[ 2.493759] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.493768] ACPI: Thermal Zone [TZ00] (44 C)
[ 2.533542] udev[70]: starting version 166
[ 2.636648] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 2.636836] ACPI: Power Button [PWRB]
[ 2.637037] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 2.637190] ACPI: Sleep Button [SLPB]
[ 2.637394] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 2.843612] acpi device:04: registered as cooling_device2
[ 2.844108] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 2.844280] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.884224] ACPI: Lid Switch [LID]
[ 2.884498] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 2.884662] ACPI: Power Button [PWRF]
[ 2.957381] usbcore: registered new interface driver usbfs
[ 2.957480] usbcore: registered new interface driver hub
[ 2.967189] usbcore: registered new device driver usb
[ 3.034466] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.034557] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.034615] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.034627] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.034692] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.039514] libata version 3.00 loaded.
[ 3.056406] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 3.056434] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.060338] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 3.060389] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0844000
[ 3.079859] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.079934] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.079945] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.079955] usb usb1: Product: EHCI Host Controller
[ 3.079962] usb usb1: Manufacturer: Linux 2.6.37.4-17-vanilla ehci_hcd
[ 3.079970] usb usb1: SerialNumber: 0000:00:1d.7
[ 3.080455] hub 1-0:1.0: USB hub found
[ 3.080472] hub 1-0:1.0: 8 ports detected
[ 3.084992] rtc_cmos 00:07: RTC can wake from S4
[ 3.105637] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.105767] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.105793] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.105803] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.105845] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.121897] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.121955] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.131774] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 3.131900] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.131910] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.131919] usb usb2: Product: UHCI Host Controller
[ 3.131926] usb usb2: Manufacturer: Linux 2.6.37.4-17-vanilla uhci_hcd
[ 3.131934] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.132466] hub 2-0:1.0: USB hub found
[ 3.132484] hub 2-0:1.0: 2 ports detected
[ 3.132755] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.132777] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.132787] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.132822] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.173447] [drm] Initialized drm 1.1.0 20060810
[ 3.192332] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 3.192464] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.192475] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.192484] usb usb3: Product: UHCI Host Controller
[ 3.192492] usb usb3: Manufacturer: Linux 2.6.37.4-17-vanilla uhci_hcd
[ 3.192499] usb usb3: SerialNumber: 0000:00:1d.1
[ 3.192989] hub 3-0:1.0: USB hub found
[ 3.193006] hub 3-0:1.0: 2 ports detected
[ 3.193269] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.193291] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.193301] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.193338] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.249975] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 3.250104] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.250114] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.250123] usb usb4: Product: UHCI Host Controller
[ 3.250129] usb usb4: Manufacturer: Linux 2.6.37.4-17-vanilla uhci_hcd
[ 3.250136] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.250634] hub 4-0:1.0: USB hub found
[ 3.250653] hub 4-0:1.0: 2 ports detected
[ 3.250927] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 3.250952] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.250964] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.250997] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.264247] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 3.264378] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.264386] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.264392] usb usb5: Product: UHCI Host Controller
[ 3.264398] usb usb5: Manufacturer: Linux 2.6.37.4-17-vanilla uhci_hcd
[ 3.264403] usb usb5: SerialNumber: 0000:00:1d.3
[ 3.264799] hub 5-0:1.0: USB hub found
[ 3.264817] hub 5-0:1.0: 2 ports detected
[ 3.265056] ata_piix 0000:00:1f.1: version 2.13
[ 3.265092] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.265229] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.266807] scsi0 : ata_piix
[ 3.267379] scsi1 : ata_piix
[ 3.269393] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 3.269407] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 3.269509] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.269525] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 3.269990] ata2: port disabled. ignoring.
[ 3.392171] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 3.424180] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.426978] scsi2 : ata_piix
[ 3.427542] scsi3 : ata_piix
[ 3.427811] ata3: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b0 irq 19
[ 3.427821] ata4: SATA max UDMA/133 cmd 0x18a8 ctl 0x180c bmdma 0x18b8 irq 19
[ 3.428581] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.428597] i915 0000:00:02.0: setting latency timer to 64
[ 3.530125] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.530632] [drm] initialized overlay support
[ 3.647575] ata3.00: ATA-8: WDC WD1600BEVS-08VAT2, 14.01A14, max UDMA/133
[ 3.647594] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.653043] ata3.00: configured for UDMA/133
[ 3.653430] scsi 2:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 14.0 PQ: 0 ANSI: 5
[ 3.654266] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 3.654519] sd 2:0:0:0: [sda] Write Protect is off
[ 3.654531] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.655301] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.686000] sda: sda1 sda2 sda3
[ 3.687092] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.706614] usb 1-3: New USB device found, idVendor=5986, idProduct=0241
[ 3.706632] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 3.706645] usb 1-3: Product: Lenovo EasyCamera
[ 3.706655] usb 1-3: Manufacturer: BISON Corporation
[ 3.835255] Console: switching to colour frame buffer device 128x36
[ 3.842579] fb0: inteldrmfb frame buffer device
[ 3.842585] drm: registered panic notifier
[ 3.842867] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.956121] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 4.099356] usb 1-5: New USB device found, idVendor=0bda, idProduct=0158
[ 4.099368] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.099377] usb 1-5: Product: USB2.0-CRW
[ 4.099383] usb 1-5: Manufacturer: Generic
[ 4.099390] usb 1-5: SerialNumber: 20071114173400000
[ 4.133572] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 4.133583] PM: Basic memory bitmaps created
[ 4.148332] PM: Basic memory bitmaps freed
[ 4.148345] video LNXVIDEO:00: Restoring backlight state
[ 4.216151] usb 1-7: new high speed USB device using ehci_hcd and address 5
[ 4.230445] PM: Starting manual resume from disk
[ 4.230453] PM: Hibernation image partition 8:2 present
[ 4.230457] PM: Looking for hibernation image.
[ 4.230851] PM: Image not found (code -22)
[ 4.230860] PM: Hibernation image not present or could not be loaded.
[ 4.352348] usb 1-7: New USB device found, idVendor=0bdb, idProduct=1900
[ 4.352358] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.352365] usb 1-7: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
[ 4.352371] usb 1-7: Manufacturer: Ericsson
[ 4.352375] usb 1-7: SerialNumber: 0115650004270950
[ 4.600138] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 4.773597] usb 3-2: New USB device found, idVendor=0a5c, idProduct=2150
[ 4.773615] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.773629] usb 3-2: Product: BCM2046 Bluetooth Device
[ 4.773639] usb 3-2: Manufacturer: Broadcom Corp
[ 4.773649] usb 3-2: SerialNumber: 00242CF78FB9
[ 6.532782] EXT3-fs: barriers not enabled
[ 6.543061] kjournald starting. Commit interval 5 seconds
[ 6.543573] EXT3-fs (sda1): using internal journal
[ 6.543592] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 10.551956] udev[401]: starting version 166
[ 10.749769] ACPI: AC Adapter [ACAD] (off-line)
[ 10.798236] ACPI: Battery Slot [BAT0] (battery present)
[ 11.137938] wmi: Mapper loaded
[ 11.459775] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 11.556385] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 11.605330] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.638712] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 11.638729] ACPI: resource 0000:00:1f.3 [io 0x18e0-0x18ff] conflicts with ACPI region SMBI [??? 0x000018e0-0x000018ef flags 0x49]
[ 11.638739] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.707927] intel_rng: FWH not detected
[ 11.773846] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.943201] Bluetooth: Core ver 2.15
[ 11.943274] NET: Registered protocol family 31
[ 11.943281] Bluetooth: HCI device and connection manager initialized
[ 11.943289] Bluetooth: HCI socket layer initialized
[ 11.982488] cdc_wdm 1-7:1.5: cdc-wdm0: USB WDM device
[ 11.982641] cdc_wdm 1-7:1.6: cdc-wdm1: USB WDM device
[ 11.982705] usbcore: registered new interface driver cdc_wdm
[ 11.995453] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 11.997200] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 11.998682] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 11.999598] usbcore: registered new interface driver cdc_acm
[ 11.999608] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 12.078412] usb 1-5: selecting invalid altsetting 1
[ 12.078490] usbcore: registered new interface driver uas
[ 12.113865] Linux video capture interface: v2.00
[ 12.122148] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 12.123471] usbcore: registered new interface driver btusb
[ 12.282028] iTCO_vendor_support: vendor-support=0
[ 12.358870] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 12.359141] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[ 12.359338] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.385666] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0241)
[ 12.390338] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input8
[ 12.390586] usbcore: registered new interface driver uvcvideo
[ 12.390594] USB Video Class driver (v1.0.0)
[ 12.438231] Initializing USB Mass Storage driver...
[ 12.439863] scsi4 : usb-storage 1-5:1.0
[ 12.440466] usbcore: registered new interface driver usb-storage
[ 12.440476] USB Mass Storage support registered.
[ 12.442375] cdc_ether 1-7:1.7: wwan0: register 'cdc_ether' at usb-0000:00:1d.7-7, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 12.442489] usbcore: registered new interface driver cdc_ether
[ 12.522410] tg3.c:v3.115 (October 14, 2010)
[ 12.522489] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.522518] tg3 0000:02:00.0: setting latency timer to 64
[ 12.597987] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:23:8b:95:a7:20
[ 12.598004] tg3 0000:02:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
[ 12.598015] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
[ 12.598025] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 12.738431] usbcore: registered new interface driver zaurus
[ 12.763935] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 12.764127] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[ 12.764192] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.767619] leds_ss4200: no LED devices found
[ 12.879759] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 12.879790] b43-pci-bridge 0000:05:00.0: setting latency timer to 64
[ 12.896597] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[ 12.896621] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[ 12.896644] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[ 12.896665] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[ 12.948445] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0
[ 13.015885] ALSA patch_realtek.c:1521: SKU: Nid=0x1d sku_cfg=0x4015812d
[ 13.015898] ALSA patch_realtek.c:1523: SKU: port_connectivity=0x1
[ 13.015908] ALSA patch_realtek.c:1524: SKU: enable_pcbeep=0x1
[ 13.015916] ALSA patch_realtek.c:1525: SKU: check_sum=0x00000005
[ 13.015925] ALSA patch_realtek.c:1526: SKU: customization=0x00000081
[ 13.015934] ALSA patch_realtek.c:1527: SKU: external_amp=0x5
[ 13.015943] ALSA patch_realtek.c:1528: SKU: platform_type=0x1
[ 13.015951] ALSA patch_realtek.c:1529: SKU: swap=0x0
[ 13.015959] ALSA patch_realtek.c:1530: SKU: override=0x1
[ 13.019075] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 13.019364] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.213962] cfg80211: Calling CRDA to update world regulatory domain
[ 13.442684] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 13.443495] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 13.451604] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 13.570508] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[ 13.789085] cfg80211: World regulatory domain updated:
[ 13.789094] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.789102] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.789109] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.789115] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.789122] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.789128] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.984305] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 13.985942] Registered led device: b43-phy0::tx
[ 13.986036] Registered led device: b43-phy0::rx
[ 13.986136] Registered led device: b43-phy0::radio
[ 13.986189] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
[ 14.426804] Adding 1566332k swap on /dev/sda2. Priority:-1 extents:1 across:1566332k
[ 15.701712] device-mapper: uevent: version 1.0.3
[ 15.702152] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[ 18.277239] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x20a
[ 18.425694] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x20a
[ 18.430843] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 18.860011] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[ 18.869004] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[ 21.256311] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 21.488589] nf_conntrack version 0.5.0 (15885 buckets, 63540 max)
[ 21.555295] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 27.874003] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 29.656972] Bluetooth: L2CAP ver 2.15
[ 29.656980] Bluetooth: L2CAP socket layer initialized
[ 29.709160] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 29.709169] Bluetooth: BNEP filters: protocol multicast
[ 30.083182] Bluetooth: SCO (Voice Link) ver 0.6
[ 30.083193] Bluetooth: SCO socket layer initialized
[ 30.457747] Bluetooth: RFCOMM TTY layer initialized
[ 30.457771] Bluetooth: RFCOMM socket layer initialized
[ 30.457781] Bluetooth: RFCOMM ver 1.11
[ 31.592236] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[ 31.626773] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 44.605502] padlock: VIA PadLock Hash Engine not detected.
[ 44.651593] device-mapper: ioctl: unable to remove open device temporary-cryptsetup-1745
[ 46.137831] EXT3-fs: barriers not enabled
[ 47.066995] kjournald starting. Commit interval 5 seconds
[ 47.067134] EXT3-fs (dm-0): warning: maximal mount count reached, running e2fsck is recommended
[ 47.067862] EXT3-fs (dm-0): using internal journal
[ 47.067877] EXT3-fs (dm-0): recovery complete
[ 47.068684] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[ 48.855912] start_kdeinit (1895): /proc/1895/oom_adj is deprecated, please use /proc/1895/oom_score_adj instead.
[ 63.018306] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 71.103460] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 77.104184] usbcore: deregistering interface driver cdc_acm
[ 77.158866] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 77.161645] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 77.164082] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 77.167246] usbcore: registered new interface driver cdc_acm
[ 77.167256] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 114.844181] usbcore: deregistering interface driver cdc_acm
[ 114.913400] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 114.915573] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 114.918236] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 114.920686] usbcore: registered new interface driver cdc_acm
[ 114.920696] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 123.128193] PPP generic driver version 2.4.2
[ 123.257626] PPP BSD Compression module registered
[ 123.297436] PPP Deflate Compression module registered
[ 1056.149273] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 1056.149288] PM: Basic memory bitmaps created
[ 1056.224271] Syncing filesystems ... done.
[ 1056.228715] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1056.244231] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1056.260409] PM: Preallocating image memory... done (allocated 141765 pages)
[ 1056.643306] PM: Allocated 567060 kbytes in 0.38 seconds (1492.26 MB/s)
[ 1056.643312] Suspending console(s) (use no_console_suspend to debug)
[ 1056.644221] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 1056.645159] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[ 1056.645475] pci 0000:00:1f.3: PCI INT B disabled
[ 1056.645656] ata2: port disabled. ignoring.
[ 1056.645756] ata_piix 0000:00:1f.1: PCI INT B disabled
[ 1056.690505] ata_piix 0000:00:1f.2: PCI INT B disabled
[ 1056.748264] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 1056.764211] PM: freeze of devices complete after 120.509 msecs
[ 1056.764917] PM: late freeze of devices complete after 0.688 msecs
[ 1056.764966] ACPI: Preparing to enter system sleep state S4
[ 1056.857581] PM: Saving platform NVS memory
[ 1056.857772] Disabling non-boot CPUs ...
[ 1056.960118] CPU 1 is now offline
[ 1056.960129] SMP alternatives: switching to UP code
[ 1056.968163] Extended CMOS year: 2000
[ 1056.968274] PM: Creating hibernation image:
[ 1056.972019] PM: Need to copy 109731 pages
[ 1056.972019] PM: Normal pages needed: 94669 + 1024, available pages: 134867
[ 1056.972019] PM: Restoring platform NVS memory
[ 1056.972019] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[ 1056.972019] CPU0: Thermal monitoring handled by SMI
[ 1056.972019] Extended CMOS year: 2000
[ 1056.972019] Enabling non-boot CPUs ...
[ 1056.972019] SMP alternatives: switching to SMP code
[ 1056.975328] Booting Node 0 Processor 1 APIC 0x1
[ 1056.967018] Initializing CPU#1
[ 1056.967018] CPU1: Thermal monitoring handled by SMI
[ 1057.064638] NMI watchdog enabled, takes one hw-pmu counter.
[ 1057.069229] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[ 1057.072152] CPU1 is up
[ 1057.072325] ACPI: Waking up from system sleep state S4
[ 1057.160472] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 1057.160975] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[ 1057.161021] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[ 1057.161202] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[ 1057.161868] PM: early restore of devices complete after 1.542 msecs
[ 1057.233004] i915 0000:00:02.0: setting latency timer to 64
[ 1057.237116] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1057.237132] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 1057.237203] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[ 1057.237276] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1057.237287] pci 0000:00:1c.0: setting latency timer to 64
[ 1057.237306] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1057.237317] pci 0000:00:1c.1: setting latency timer to 64
[ 1057.237336] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1057.237346] pci 0000:00:1c.2: setting latency timer to 64
[ 1057.237363] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1057.237413] usb usb2: root hub lost power or was reset
[ 1057.237434] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1057.237481] usb usb3: root hub lost power or was reset
[ 1057.237502] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1057.237549] usb usb4: root hub lost power or was reset
[ 1057.237569] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1057.237616] usb usb5: root hub lost power or was reset
[ 1057.237638] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1057.237677] usb usb1: root hub lost power or was reset
[ 1057.241581] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1057.241606] pci 0000:00:1e.0: setting latency timer to 64
[ 1057.241635] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1057.241646] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1057.241693] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1057.241704] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1057.241741] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1057.241963] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1057.242545] sd 2:0:0:0: [sda] Starting disk
[ 1057.245740] ata2: port disabled. ignoring.
[ 1057.464702] ata3.00: configured for UDMA/133
[ 1057.708161] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 1057.976162] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[ 1058.220157] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[ 1058.369742] btusb 3-2:1.0: no reset_resume for driver btusb?
[ 1058.369751] btusb 3-2:1.1: no reset_resume for driver btusb?
[ 1058.464143] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[ 1058.603986] PM: restore of devices complete after 1371.331 msecs
[ 1058.617959] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[ 1058.617970] Restarting tasks ... done.
[ 1058.660997] PM: Basic memory bitmaps freed
[ 1058.661014] video LNXVIDEO:00: Restoring backlight state
[ 1062.900733] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[ 1062.936679] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1079.753180] usbcore: deregistering interface driver cdc_acm
[ 1079.822086] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 1079.824541] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 1079.827229] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 1079.831600] usbcore: registered new interface driver cdc_acm
[ 1079.831610] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1251.938497] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 1251.938512] PM: Basic memory bitmaps created
[ 1252.013574] Syncing filesystems ... done.
[ 1252.016769] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1252.032269] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1252.052087] PM: Preallocating image memory... done (allocated 141761 pages)
[ 1252.283026] PM: Allocated 567044 kbytes in 0.23 seconds (2465.40 MB/s)
[ 1252.283033] Suspending console(s) (use no_console_suspend to debug)
[ 1252.290505] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[ 1252.291437] pci 0000:00:1f.3: PCI INT B disabled
[ 1252.291578] ata2: port disabled. ignoring.
[ 1252.291678] ata_piix 0000:00:1f.1: PCI INT B disabled
[ 1252.396260] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 1252.488138] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 1252.538810] ata_piix 0000:00:1f.2: PCI INT B disabled
[ 1252.538851] PM: freeze of devices complete after 255.433 msecs
[ 1252.539505] PM: late freeze of devices complete after 0.641 msecs
[ 1252.539554] ACPI: Preparing to enter system sleep state S4
[ 1252.633607] PM: Saving platform NVS memory
[ 1252.633815] Disabling non-boot CPUs ...
[ 1252.736121] CPU 1 is now offline
[ 1252.736133] SMP alternatives: switching to UP code
[ 1252.744167] Extended CMOS year: 2000
[ 1252.744278] PM: Creating hibernation image:
[ 1252.748017] PM: Need to copy 113888 pages
[ 1252.748017] PM: Normal pages needed: 112001 + 1024, available pages: 143885
[ 1252.748017] PM: Restoring platform NVS memory
[ 1252.748017] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[ 1252.748017] CPU0: Thermal monitoring handled by SMI
[ 1252.748017] Extended CMOS year: 2000
[ 1252.748017] Enabling non-boot CPUs ...
[ 1252.748017] SMP alternatives: switching to SMP code
[ 1252.751176] Booting Node 0 Processor 1 APIC 0x1
[ 1252.743073] Initializing CPU#1
[ 1252.743073] CPU1: Thermal monitoring handled by SMI
[ 1252.840722] NMI watchdog enabled, takes one hw-pmu counter.
[ 1252.845316] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[ 1252.848147] CPU1 is up
[ 1252.848320] ACPI: Waking up from system sleep state S4
[ 1252.936471] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 1252.936975] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[ 1252.937020] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[ 1252.937201] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[ 1252.937865] PM: early restore of devices complete after 1.540 msecs
[ 1253.011750] i915 0000:00:02.0: setting latency timer to 64
[ 1253.016261] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1253.016277] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 1253.016347] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[ 1253.016420] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1253.016431] pci 0000:00:1c.0: setting latency timer to 64
[ 1253.016450] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1253.016460] pci 0000:00:1c.1: setting latency timer to 64
[ 1253.016479] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1253.016490] pci 0000:00:1c.2: setting latency timer to 64
[ 1253.016507] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1253.016556] usb usb2: root hub lost power or was reset
[ 1253.016578] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1253.016625] usb usb3: root hub lost power or was reset
[ 1253.016646] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1253.016692] usb usb4: root hub lost power or was reset
[ 1253.016712] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1253.016759] usb usb5: root hub lost power or was reset
[ 1253.016781] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1253.016820] usb usb1: root hub lost power or was reset
[ 1253.020708] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1253.020733] pci 0000:00:1e.0: setting latency timer to 64
[ 1253.020761] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1253.020772] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1253.020819] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1253.020830] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1253.020864] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1253.021085] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1253.021602] sd 2:0:0:0: [sda] Starting disk
[ 1253.021863] ata2: port disabled. ignoring.
[ 1253.245156] ata3.00: configured for UDMA/133
[ 1253.488157] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 1253.756166] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[ 1253.905620] btusb 3-2:1.0: no reset_resume for driver btusb?
[ 1253.905635] btusb 3-2:1.1: no reset_resume for driver btusb?
[ 1254.000169] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[ 1254.244129] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[ 1254.381940] PM: restore of devices complete after 1370.545 msecs
[ 1254.399515] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[ 1254.399524] Restarting tasks ... done.
[ 1254.495445] PM: Basic memory bitmaps freed
[ 1254.495463] video LNXVIDEO:00: Restoring backlight state
[ 1255.770458] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[ 1255.805118] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1269.448113] usbcore: deregistering interface driver cdc_acm
[ 1269.517175] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 1269.520709] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 1269.521900] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 1269.524482] usbcore: registered new interface driver cdc_acm
[ 1269.524492] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1309.532229] usbcore: deregistering interface driver cdc_acm
[ 1309.592135] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 1309.594543] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 1309.597832] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 1309.600324] usbcore: registered new interface driver cdc_acm
[ 1309.600334] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2345.291315] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 2345.291329] PM: Basic memory bitmaps created
[ 2345.380254] Syncing filesystems ... done.
[ 2345.382927] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2345.396232] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 2345.415158] PM: Preallocating image memory... done (allocated 141755 pages)
[ 2345.685113] PM: Allocated 567020 kbytes in 0.26 seconds (2180.84 MB/s)
[ 2345.685119] Suspending console(s) (use no_console_suspend to debug)
[ 2345.685957] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 2345.686935] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[ 2345.687259] pci 0000:00:1f.3: PCI INT B disabled
[ 2345.687481] ata2: port disabled. ignoring.
[ 2345.687615] ata_piix 0000:00:1f.1: PCI INT B disabled
[ 2345.792253] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 2346.079230] ata_piix 0000:00:1f.2: PCI INT B disabled
[ 2346.079271] PM: freeze of devices complete after 393.783 msecs
[ 2346.079924] PM: late freeze of devices complete after 0.642 msecs
[ 2346.079974] ACPI: Preparing to enter system sleep state S4
[ 2346.173559] PM: Saving platform NVS memory
[ 2346.173774] Disabling non-boot CPUs ...
[ 2346.276120] CPU 1 is now offline
[ 2346.276132] SMP alternatives: switching to UP code
[ 2346.284331] Extended CMOS year: 2000
[ 2346.284443] PM: Creating hibernation image:
[ 2346.288019] PM: Need to copy 113916 pages
[ 2346.288019] PM: Normal pages needed: 107298 + 1024, available pages: 139126
[ 2346.288019] PM: Restoring platform NVS memory
[ 2346.288019] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[ 2346.288019] CPU0: Thermal monitoring handled by SMI
[ 2346.288019] Extended CMOS year: 2000
[ 2346.288019] Enabling non-boot CPUs ...
[ 2346.288019] SMP alternatives: switching to SMP code
[ 2346.291337] Booting Node 0 Processor 1 APIC 0x1
[ 2346.283088] Initializing CPU#1
[ 2346.283088] CPU1: Thermal monitoring handled by SMI
[ 2346.380734] NMI watchdog enabled, takes one hw-pmu counter.
[ 2346.385334] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[ 2346.388146] CPU1 is up
[ 2346.388317] ACPI: Waking up from system sleep state S4
[ 2346.476472] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 2346.476975] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[ 2346.477020] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[ 2346.477201] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[ 2346.477865] PM: early restore of devices complete after 1.538 msecs
[ 2346.551378] i915 0000:00:02.0: setting latency timer to 64
[ 2346.556072] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2346.556087] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 2346.556158] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[ 2346.556231] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2346.556242] pci 0000:00:1c.0: setting latency timer to 64
[ 2346.556261] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 2346.556272] pci 0000:00:1c.1: setting latency timer to 64
[ 2346.556290] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2346.556301] pci 0000:00:1c.2: setting latency timer to 64
[ 2346.556317] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2346.556368] usb usb2: root hub lost power or was reset
[ 2346.556389] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2346.556436] usb usb3: root hub lost power or was reset
[ 2346.556457] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2346.556504] usb usb4: root hub lost power or was reset
[ 2346.556524] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2346.556570] usb usb5: root hub lost power or was reset
[ 2346.556592] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2346.556631] usb usb1: root hub lost power or was reset
[ 2346.560538] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 2346.560564] pci 0000:00:1e.0: setting latency timer to 64
[ 2346.560592] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2346.560603] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2346.560651] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2346.560662] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2346.560695] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2346.560916] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2346.561501] sd 2:0:0:0: [sda] Starting disk
[ 2346.565103] ata2: port disabled. ignoring.
[ 2346.773269] ata3.00: configured for UDMA/133
[ 2347.028127] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[ 2347.272156] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 2347.540157] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[ 2347.784152] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[ 2347.934909] btusb 3-2:1.0: no reset_resume for driver btusb?
[ 2347.934917] btusb 3-2:1.1: no reset_resume for driver btusb?
[ 2347.935388] PM: restore of devices complete after 1384.360 msecs
[ 2347.952005] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[ 2347.952052] Restarting tasks ... done.
[ 2348.019766] PM: Basic memory bitmaps freed
[ 2348.019779] video LNXVIDEO:00: Restoring backlight state
[ 2350.758583] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[ 2350.805002] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2362.140187] usbcore: deregistering interface driver cdc_acm
[ 2362.206235] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 2362.208414] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 2362.211575] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 2362.212527] usbcore: registered new interface driver cdc_acm
[ 2362.212537] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 3335.928419] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 3341.371749] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3341.599949] NET: Registered protocol family 17
[ 3345.904833] wlan0: authenticate with 00:0e:84:40:c8:e0 (try 1)
[ 3345.912230] wlan0: authenticated
[ 3345.920441] wlan0: associate with 00:0e:84:40:c8:e0 (try 1)
[ 3345.929203] wlan0: RX AssocResp from 00:0e:84:40:c8:e0 (capab=0x431 status=0 aid=18)
[ 3345.929223] wlan0: associated
[ 3345.935598] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3345.935839] cfg80211: Calling CRDA for country: AT
[ 3346.089768] cfg80211: Regulatory domain changed to country: AT
[ 3346.089780] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3346.089791] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3346.089800] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3346.089809] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3346.089818] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 3356.864089] wlan0: no IPv6 routers present
[ 5124.972238] wlan0: deauthenticated from 00:0e:84:40:c8:e0 (Reason: 1)
[ 5124.996373] cfg80211: Calling CRDA to update world regulatory domain
[ 5125.015561] cfg80211: World regulatory domain updated:
[ 5125.015576] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5125.015594] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5125.015611] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5125.015630] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5125.015649] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5125.015667] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5126.393035] wlan0: authenticate with 00:0e:84:40:c8:e0 (try 1)
[ 5126.404368] wlan0: authenticated
[ 5126.405159] wlan0: associate with 00:0e:84:40:c8:e0 (try 1)
[ 5126.410987] wlan0: RX AssocResp from 00:0e:84:40:c8:e0 (capab=0x431 status=0 aid=18)
[ 5126.410996] wlan0: associated
[ 5126.413753] cfg80211: Calling CRDA for country: AT
[ 5126.433635] cfg80211: Regulatory domain changed to country: AT
[ 5126.433645] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5126.433655] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 5126.433663] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 5126.433671] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 5126.433679] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 5549.828309] wlan0: deauthenticating from 00:0e:84:40:c8:e0 by local choice (reason=3)
[ 5549.864676] cfg80211: Calling CRDA to update world regulatory domain
[ 5549.887935] cfg80211: World regulatory domain updated:
[ 5549.887946] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5549.887957] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5549.887966] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5549.887976] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5549.887985] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5549.887995] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5556.378529] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 5556.378543] PM: Basic memory bitmaps created
[ 5556.506054] Syncing filesystems ... done.
[ 5556.510035] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 5556.524204] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 5556.543043] PM: Preallocating image memory... done (allocated 141753 pages)
[ 5556.939912] PM: Allocated 567012 kbytes in 0.39 seconds (1453.87 MB/s)
[ 5556.939918] Suspending console(s) (use no_console_suspend to debug)
[ 5556.941231] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 5556.942168] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[ 5556.942493] pci 0000:00:1f.3: PCI INT B disabled
[ 5556.942715] ata2: port disabled. ignoring.
[ 5556.942818] ata_piix 0000:00:1f.1: PCI INT B disabled
[ 5557.044268] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 5557.257868] ata_piix 0000:00:1f.2: PCI INT B disabled
[ 5557.257924] PM: freeze of devices complete after 317.589 msecs
[ 5557.258578] PM: late freeze of devices complete after 0.642 msecs
[ 5557.258627] ACPI: Preparing to enter system sleep state S4
[ 5557.349592] PM: Saving platform NVS memory
[ 5557.349822] Disabling non-boot CPUs ...
[ 5557.452120] CPU 1 is now offline
[ 5557.452131] SMP alternatives: switching to UP code
[ 5557.460420] Extended CMOS year: 2000
[ 5557.460531] PM: Creating hibernation image:
[ 5557.464018] PM: Need to copy 108385 pages
[ 5557.464018] PM: Normal pages needed: 94319 + 1024, available pages: 137209
[ 5557.464018] PM: Restoring platform NVS memory
[ 5557.464018] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[ 5557.464018] CPU0: Thermal monitoring handled by SMI
[ 5557.464018] Extended CMOS year: 2000
[ 5557.464018] Enabling non-boot CPUs ...
[ 5557.464018] SMP alternatives: switching to SMP code
[ 5557.467461] Booting Node 0 Processor 1 APIC 0x1
[ 5557.459118] Initializing CPU#1
[ 5557.459118] CPU1: Thermal monitoring handled by SMI
[ 5557.556783] NMI watchdog enabled, takes one hw-pmu counter.
[ 5557.561386] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[ 5557.564171] CPU1 is up
[ 5557.564344] ACPI: Waking up from system sleep state S4
[ 5557.652469] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 5557.652973] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[ 5557.653019] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[ 5557.653200] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[ 5557.653864] PM: early restore of devices complete after 1.539 msecs
[ 5557.724000] i915 0000:00:02.0: setting latency timer to 64
[ 5557.728678] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5557.728694] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5557.728764] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[ 5557.728837] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5557.728848] pci 0000:00:1c.0: setting latency timer to 64
[ 5557.728867] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 5557.728877] pci 0000:00:1c.1: setting latency timer to 64
[ 5557.728897] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5557.728907] pci 0000:00:1c.2: setting latency timer to 64
[ 5557.728924] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5557.728974] usb usb2: root hub lost power or was reset
[ 5557.728996] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5557.729043] usb usb3: root hub lost power or was reset
[ 5557.729063] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5557.729110] usb usb4: root hub lost power or was reset
[ 5557.729130] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 5557.729177] usb usb5: root hub lost power or was reset
[ 5557.729199] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5557.729238] usb usb1: root hub lost power or was reset
[ 5557.733127] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 5557.733153] pci 0000:00:1e.0: setting latency timer to 64
[ 5557.733181] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5557.733192] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 5557.733236] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5557.733247] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 5557.733280] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5557.733501] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5557.734095] sd 2:0:0:0: [sda] Starting disk
[ 5557.737597] ata2: port disabled. ignoring.
[ 5557.957064] ata3.00: configured for UDMA/133
[ 5558.200128] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[ 5558.444147] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 5558.712158] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[ 5558.956141] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[ 5559.107899] btusb 3-2:1.0: no reset_resume for driver btusb?
[ 5559.107914] btusb 3-2:1.1: no reset_resume for driver btusb?
[ 5559.108494] PM: restore of devices complete after 1384.845 msecs
[ 5559.125252] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[ 5559.125454] Restarting tasks ... done.
[ 5559.225671] PM: Basic memory bitmaps freed
[ 5559.225690] video LNXVIDEO:00: Restoring backlight state
[ 5562.938488] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[ 5562.972832] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5580.188371] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 5585.638001] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5682.697604] usbcore: deregistering interface driver cdc_acm
[ 5682.778421] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 5682.780919] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 5682.783524] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 5682.785226] usbcore: registered new interface driver cdc_acm
[ 5682.785234] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 5736.248193] usbcore: deregistering interface driver cdc_acm
[ 5736.318741] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 5736.320435] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 5736.324950] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 5736.325854] usbcore: registered new interface driver cdc_acm
[ 5736.325864] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 5788.052270] usbcore: deregistering interface driver cdc_acm
[ 5788.123668] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 5788.126997] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 5788.128798] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 5788.133122] usbcore: registered new interface driver cdc_acm
[ 5788.133132] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 8973.913253] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 8973.913268] PM: Basic memory bitmaps created
[ 8973.978612] Syncing filesystems ... done.
[ 8973.982426] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 8973.996450] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 8974.015231] PM: Preallocating image memory... done (allocated 141761 pages)
[ 8974.315311] PM: Allocated 567044 kbytes in 0.30 seconds (1890.14 MB/s)
[ 8974.315317] Suspending console(s) (use no_console_suspend to debug)
[ 8974.316986] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 8974.317923] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[ 8974.318050] pci 0000:00:1f.3: PCI INT B disabled
[ 8974.318338] ata_piix 0000:00:1f.2: PCI INT B disabled
[ 8974.318396] ata2: port disabled. ignoring.
[ 8974.332231] ata_piix 0000:00:1f.1: PCI INT B disabled
[ 8974.420279] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 8974.436207] PM: freeze of devices complete after 120.493 msecs
[ 8974.436913] PM: late freeze of devices complete after 0.689 msecs
[ 8974.436960] ACPI: Preparing to enter system sleep state S4
[ 8974.529630] PM: Saving platform NVS memory
[ 8974.529886] Disabling non-boot CPUs ...
[ 8974.632112] CPU 1 is now offline
[ 8974.632123] SMP alternatives: switching to UP code
[ 8974.640344] Extended CMOS year: 2000
[ 8974.640456] PM: Creating hibernation image:
[ 8974.644019] PM: Need to copy 113883 pages
[ 8974.644019] PM: Normal pages needed: 106972 + 1024, available pages: 138866
[ 8974.644019] PM: Restoring platform NVS memory
[ 8974.644019] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[ 8974.644019] CPU0: Thermal monitoring handled by SMI
[ 8974.644019] Extended CMOS year: 2000
[ 8974.644019] Enabling non-boot CPUs ...
[ 8974.644019] SMP alternatives: switching to SMP code
[ 8974.647392] Booting Node 0 Processor 1 APIC 0x1
[ 8974.639109] Initializing CPU#1
[ 8974.639109] CPU1: Thermal monitoring handled by SMI
[ 8974.736721] NMI watchdog enabled, takes one hw-pmu counter.
[ 8974.741315] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[ 8974.744151] CPU1 is up
[ 8974.744327] ACPI: Waking up from system sleep state S4
[ 8974.832470] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 8974.832972] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[ 8974.833018] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[ 8974.833199] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[ 8974.833863] PM: early restore of devices complete after 1.539 msecs
[ 8974.908690] i915 0000:00:02.0: setting latency timer to 64
[ 8974.913378] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8974.913394] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8974.913466] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[ 8974.913538] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8974.913549] pci 0000:00:1c.0: setting latency timer to 64
[ 8974.913569] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 8974.913579] pci 0000:00:1c.1: setting latency timer to 64
[ 8974.913598] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8974.913608] pci 0000:00:1c.2: setting latency timer to 64
[ 8974.913625] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 8974.913675] usb usb2: root hub lost power or was reset
[ 8974.913697] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 8974.913744] usb usb3: root hub lost power or was reset
[ 8974.913764] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 8974.913811] usb usb4: root hub lost power or was reset
[ 8974.913831] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 8974.913877] usb usb5: root hub lost power or was reset
[ 8974.913899] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 8974.913939] usb usb1: root hub lost power or was reset
[ 8974.917831] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 8974.917857] pci 0000:00:1e.0: setting latency timer to 64
[ 8974.917885] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8974.917896] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 8974.917944] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8974.917955] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 8974.917987] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8974.918208] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8974.918308] ata2: port disabled. ignoring.
[ 8974.918925] sd 2:0:0:0: [sda] Starting disk
[ 8975.137275] ata3.00: configured for UDMA/133
[ 8975.384162] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 8975.652158] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[ 8975.802704] btusb 3-2:1.0: no reset_resume for driver btusb?
[ 8975.802719] btusb 3-2:1.1: no reset_resume for driver btusb?
[ 8975.896157] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[ 8976.140118] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[ 8976.279494] PM: restore of devices complete after 1371.159 msecs
[ 8976.296205] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[ 8976.296407] Restarting tasks ... done.
[ 8976.405475] PM: Basic memory bitmaps freed
[ 8976.405494] video LNXVIDEO:00: Restoring backlight state
[ 8979.142970] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[ 8979.176466] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9648.554505] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 9648.554519] PM: Basic memory bitmaps created
[ 9648.628361] Syncing filesystems ... done.
[ 9648.631146] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 9648.648232] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 9648.667147] PM: Preallocating image memory... done (allocated 141755 pages)
[ 9648.892259] PM: Allocated 567020 kbytes in 0.22 seconds (2577.36 MB/s)
[ 9648.892265] Suspending console(s) (use no_console_suspend to debug)
[ 9648.893067] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 9648.894058] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[ 9648.894405] pci 0000:00:1f.3: PCI INT B disabled
[ 9648.894634] ata2: port disabled. ignoring.
[ 9648.900095] ata_piix 0000:00:1f.1: PCI INT B disabled
[ 9649.133320] ata_piix 0000:00:1f.2: PCI INT B disabled
[ 9650.000325] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 9650.016240] PM: freeze of devices complete after 1123.579 msecs
[ 9650.016933] PM: late freeze of devices complete after 0.678 msecs
[ 9650.016984] ACPI: Preparing to enter system sleep state S4
[ 9650.109655] PM: Saving platform NVS memory
[ 9650.109920] Disabling non-boot CPUs ...
[ 9650.212125] CPU 1 is now offline
[ 9650.212136] SMP alternatives: switching to UP code
[ 9650.220293] Extended CMOS year: 2000
[ 9650.220403] PM: Creating hibernation image:
[ 9650.224019] PM: Need to copy 113836 pages
[ 9650.224019] PM: Normal pages needed: 110771 + 1024, available pages: 142759
[ 9650.224019] PM: Restoring platform NVS memory
[ 9650.224019] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[ 9650.224019] CPU0: Thermal monitoring handled by SMI
[ 9650.224019] Extended CMOS year: 2000
[ 9650.224019] Enabling non-boot CPUs ...
[ 9650.224019] SMP alternatives: switching to SMP code
[ 9650.227334] Booting Node 0 Processor 1 APIC 0x1
[ 9650.219111] Initializing CPU#1
[ 9650.219111] CPU1: Thermal monitoring handled by SMI
[ 9650.316713] NMI watchdog enabled, takes one hw-pmu counter.
[ 9650.321316] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[ 9650.324155] CPU1 is up
[ 9650.324328] ACPI: Waking up from system sleep state S4
[ 9650.412469] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 9650.412973] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[ 9650.413018] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[ 9650.413199] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[ 9650.413863] PM: early restore of devices complete after 1.539 msecs
[ 9650.487000] i915 0000:00:02.0: setting latency timer to 64
[ 9650.491507] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9650.491523] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9650.491594] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[ 9650.491668] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9650.491679] pci 0000:00:1c.0: setting latency timer to 64
[ 9650.491698] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 9650.491708] pci 0000:00:1c.1: setting latency timer to 64
[ 9650.491727] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 9650.491738] pci 0000:00:1c.2: setting latency timer to 64
[ 9650.491754] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 9650.491804] usb usb2: root hub lost power or was reset
[ 9650.491826] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 9650.491873] usb usb3: root hub lost power or was reset
[ 9650.491894] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 9650.491941] usb usb4: root hub lost power or was reset
[ 9650.491961] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 9650.492011] usb usb5: root hub lost power or was reset
[ 9650.492065] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 9650.492105] usb usb1: root hub lost power or was reset
[ 9650.496027] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 9650.496052] pci 0000:00:1e.0: setting latency timer to 64
[ 9650.496081] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9650.496092] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 9650.496136] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9650.496147] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 9650.496179] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9650.496400] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9650.496968] sd 2:0:0:0: [sda] Starting disk
[ 9650.500173] ata2: port disabled. ignoring.
[ 9650.725181] ata3.00: configured for UDMA/133
[ 9650.964158] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 9651.232160] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[ 9651.476158] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[ 9651.720541] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[ 9651.871769] btusb 3-2:1.0: no reset_resume for driver btusb?
[ 9651.871784] btusb 3-2:1.1: no reset_resume for driver btusb?
[ 9651.872447] PM: restore of devices complete after 1385.810 msecs
[ 9651.888995] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[ 9651.889007] Restarting tasks ... done.
[ 9651.998400] PM: Basic memory bitmaps freed
[ 9651.998418] video LNXVIDEO:00: Restoring backlight state
[ 9653.227405] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[ 9653.261612] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9786.676161] usbcore: deregistering interface driver cdc_acm
[ 9786.742359] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 9786.744957] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 9786.749277] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 9786.750205] usbcore: registered new interface driver cdc_acm
[ 9786.750215] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[10167.987493] PM: Syncing filesystems ... done.
[10167.998137] PM: Preparing system for mem sleep
[10167.999000] Freezing user space processes ... (elapsed 0.01 seconds) done.
[10168.012351] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[10168.028307] PM: Entering mem sleep
[10168.028339] Suspending console(s) (use no_console_suspend to debug)
[10168.029132] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[10168.110729] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[10168.110966] pci 0000:00:1f.3: PCI INT B disabled
[10168.111700] ata_piix 0000:00:1f.1: PCI INT B disabled
[10168.131721] sd 2:0:0:0: [sda] Stopping disk
[10168.212232] HDA Intel 0000:00:1b.0: PCI INT A disabled
[10168.417787] ata_piix 0000:00:1f.2: PCI INT B disabled
[10168.432216] PM: suspend of devices complete after 403.547 msecs
[10168.448523] PM: late suspend of devices complete after 16.285 msecs
[10168.448555] ACPI: Preparing to enter system sleep state S3
[10168.541582] PM: Saving platform NVS memory
[10168.541848] Disabling non-boot CPUs ...
[10168.648118] CPU 1 is now offline
[10168.648129] SMP alternatives: switching to UP code
[10168.656235] Extended CMOS year: 2000
[10168.656235] Back to C!
[10168.656235] PM: Restoring platform NVS memory
[10168.656235] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[10168.656235] CPU0: Thermal monitoring handled by SMI
[10168.656235] Extended CMOS year: 2000
[10168.656235] Enabling non-boot CPUs ...
[10168.656235] SMP alternatives: switching to SMP code
[10168.663266] Booting Node 0 Processor 1 APIC 0x1
[10168.655102] Initializing CPU#1
[10168.752666] NMI watchdog enabled, takes one hw-pmu counter.
[10168.757266] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[10168.760157] CPU1 is up
[10168.760326] ACPI: Waking up from system sleep state S3
[10168.832447] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[10168.832485] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[10168.832537] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[10168.832549] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[10168.832591] pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x40103)
[10168.832609] pci 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xf001f001)
[10168.832619] pci 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf020f020)
[10168.832629] pci 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
[10168.832639] pci 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x20200)
[10168.832652] pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[10168.832663] pci 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[10168.832708] pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x4020b)
[10168.832726] pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf011f011)
[10168.832736] pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf030f030)
[10168.832746] pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030)
[10168.832761] pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[10168.832772] pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[10168.832817] pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40303)
[10168.832835] pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x40114001)
[10168.832845] pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xf040f040)
[10168.832855] pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040)
[10168.832870] pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[10168.832881] pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[10168.833126] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[10168.833136] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[10168.833145] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[10168.833224] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x200, writing 0x2ff)
[10168.833272] ata_piix 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
[10168.833461] tg3 0000:02:00.0: restoring config space at offset 0xf (was 0x1ef, writing 0x10b)
[10168.833487] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[10168.833532] tg3 0000:02:00.0: restoring config space at offset 0x5 (was 0xfff3ffff, writing 0x0)
[10168.833549] tg3 0000:02:00.0: restoring config space at offset 0x4 (was 0xfffe0004, writing 0xf0200004)
[10168.833565] tg3 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[10168.833586] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[10168.833923] b43-pci-bridge 0000:05:00.0: restoring config space at offset 0xf (was 0x100, writing 0x103)
[10168.833989] b43-pci-bridge 0000:05:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0400004)
[10168.834005] b43-pci-bridge 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[10168.834027] b43-pci-bridge 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[10168.834253] PM: early resume of devices complete after 1.899 msecs
[10168.834955] i915 0000:00:02.0: setting latency timer to 64
[10168.837047] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[10168.837063] HDA Intel 0000:00:1b.0: setting latency timer to 64
[10168.837135] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[10168.837205] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[10168.837216] pci 0000:00:1c.0: setting latency timer to 64
[10168.837236] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[10168.837247] pci 0000:00:1c.1: setting latency timer to 64
[10168.837267] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[10168.837277] pci 0000:00:1c.2: setting latency timer to 64
[10168.837295] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[10168.837331] usb usb2: root hub lost power or was reset
[10168.837354] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[10168.837388] usb usb3: root hub lost power or was reset
[10168.837410] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[10168.837443] usb usb4: root hub lost power or was reset
[10168.837464] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[10168.837497] usb usb5: root hub lost power or was reset
[10168.837521] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[10168.837625] pci 0000:00:1e.0: setting latency timer to 64
[10168.837653] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[10168.837664] ata_piix 0000:00:1f.1: setting latency timer to 64
[10168.837710] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[10168.837721] ata_piix 0000:00:1f.2: setting latency timer to 64
[10168.837758] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[10168.837815] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[10168.838023] ata2: port disabled. ignoring.
[10168.840391] sd 2:0:0:0: [sda] Starting disk
[10169.200166] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[10169.468155] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[10169.712149] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[10169.867148] btusb 3-2:1.0: no reset_resume for driver btusb?
[10169.867164] btusb 3-2:1.1: no reset_resume for driver btusb?
[10170.865316] ata3.00: configured for UDMA/133
[10170.868350] PM: resume of devices complete after 2033.991 msecs
[10170.869390] PM: Finishing wakeup.
[10170.869396] Restarting tasks ...
[10170.870450] usb 1-7: USB disconnect, address 5
[10170.871598] ehci_hcd 0000:00:1d.7: dma_pool_free buffer-2048, f51bf000/351bf000 (bad dma)
[10170.871835] ehci_hcd 0000:00:1d.7: dma_pool_free buffer-2048, f51bf080/351bf080 (bad dma)
[10170.871957] cdc_ether 1-7:1.7: wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-7, Mobile Broadband Network Device
[10170.903663] done.
[10170.903690] video LNXVIDEO:00: Restoring backlight state
[10171.208154] usb 1-7: new high speed USB device using ehci_hcd and address 6
[10171.343517] usb 1-7: New USB device found, idVendor=0bdb, idProduct=1900
[10171.343530] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10171.343540] usb 1-7: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
[10171.343548] usb 1-7: Manufacturer: Ericsson
[10171.343555] usb 1-7: SerialNumber: 0115650004270950
[10171.352257] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[10171.354643] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[10171.357008] cdc_wdm 1-7:1.5: cdc-wdm0: USB WDM device
[10171.358720] cdc_wdm 1-7:1.6: cdc-wdm1: USB WDM device
[10171.363473] cdc_ether 1-7:1.7: wwan0: register 'cdc_ether' at usb-0000:00:1d.7-7, Mobile Broadband Network Device, 02:80:37:ec:02:00
[10171.365065] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[10172.152820] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[10172.200970] ADDRCONF(NETDEV_UP): eth0: link is not ready
[10216.048368] usbcore: deregistering interface driver cdc_acm
[10216.118766] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[10216.120998] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[10216.123764] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[10216.128458] usbcore: registered new interface driver cdc_acm
[10216.128468] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[10255.944567] usbcore: deregistering interface driver cdc_acm
[10256.012542] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[10256.014443] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[10256.019612] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[10256.021630] usbcore: registered new interface driver cdc_acm
[10256.021640] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[11303.127484] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[11303.127498] PM: Basic memory bitmaps created
[11303.204756] Syncing filesystems ... done.
[11303.207377] Freezing user space processes ... (elapsed 0.01 seconds) done.
[11303.224208] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[11303.242919] PM: Preallocating image memory... done (allocated 141759 pages)
[11303.502556] PM: Allocated 567036 kbytes in 0.25 seconds (2268.14 MB/s)
[11303.502562] Suspending console(s) (use no_console_suspend to debug)
[11303.504567] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[11303.505564] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[11303.505922] pci 0000:00:1f.3: PCI INT B disabled
[11303.506150] ata2: port disabled. ignoring.
[11303.506256] ata_piix 0000:00:1f.1: PCI INT B disabled
[11303.608639] HDA Intel 0000:00:1b.0: PCI INT A disabled
[11303.916104] ata_piix 0000:00:1f.2: PCI INT B disabled
[11303.916147] PM: freeze of devices complete after 413.188 msecs
[11303.916837] PM: late freeze of devices complete after 0.677 msecs
[11303.916889] ACPI: Preparing to enter system sleep state S4
[11304.009801] PM: Saving platform NVS memory
[11304.010115] Disabling non-boot CPUs ...
[11304.112203] CPU 1 is now offline
[11304.112214] SMP alternatives: switching to UP code
[11304.120535] Extended CMOS year: 2000
[11304.120652] PM: Creating hibernation image:
[11304.124019] PM: Need to copy 113911 pages
[11304.124019] PM: Normal pages needed: 109366 + 1024, available pages: 141204
[11304.124019] PM: Restoring platform NVS memory
[11304.124019] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[11304.124019] CPU0: Thermal monitoring handled by SMI
[11304.124019] Extended CMOS year: 2000
[11304.124019] Enabling non-boot CPUs ...
[11304.124019] SMP alternatives: switching to SMP code
[11304.127619] Booting Node 0 Processor 1 APIC 0x1
[11304.119294] Initializing CPU#1
[11304.119294] CPU1: Thermal monitoring handled by SMI
[11304.216790] NMI watchdog enabled, takes one hw-pmu counter.
[11304.221390] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[11304.224168] CPU1 is up
[11304.224338] ACPI: Waking up from system sleep state S4
[11304.316470] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[11304.316527] pci 0000:00:1c.0: restoring config space at offset 0x7 (was 0x2020, writing 0x20002020)
[11304.316593] pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x3030, writing 0x20003030)
[11304.316659] pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x4040, writing 0x20004040)
[11304.316998] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[11304.317043] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[11304.317223] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[11304.317892] PM: early restore of devices complete after 1.567 msecs
[11304.391204] i915 0000:00:02.0: setting latency timer to 64
[11304.395809] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[11304.395825] HDA Intel 0000:00:1b.0: setting latency timer to 64
[11304.395896] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[11304.395968] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[11304.395979] pci 0000:00:1c.0: setting latency timer to 64
[11304.395998] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[11304.396048] pci 0000:00:1c.1: setting latency timer to 64
[11304.396070] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[11304.396080] pci 0000:00:1c.2: setting latency timer to 64
[11304.396098] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[11304.396148] usb usb2: root hub lost power or was reset
[11304.396170] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[11304.396217] usb usb3: root hub lost power or was reset
[11304.396237] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[11304.396284] usb usb4: root hub lost power or was reset
[11304.396303] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[11304.396350] usb usb5: root hub lost power or was reset
[11304.396372] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[11304.396411] usb usb1: root hub lost power or was reset
[11304.400311] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[11304.400337] pci 0000:00:1e.0: setting latency timer to 64
[11304.400366] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[11304.400376] ata_piix 0000:00:1f.1: setting latency timer to 64
[11304.400421] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[11304.400432] ata_piix 0000:00:1f.2: setting latency timer to 64
[11304.400464] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[11304.400685] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[11304.401275] sd 2:0:0:0: [sda] Starting disk
[11304.404493] ata2: port disabled. ignoring.
[11304.624743] ata3.00: configured for UDMA/133
[11304.868157] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[11305.136154] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[11305.290097] btusb 3-2:1.0: no reset_resume for driver btusb?
[11305.290112] btusb 3-2:1.1: no reset_resume for driver btusb?
[11305.388158] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[11305.632102] usb 1-7: reset high speed USB device using ehci_hcd and address 6
[11305.769775] PM: restore of devices complete after 1378.924 msecs
[11305.786125] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[11305.786139] Restarting tasks ... done.
[11305.878418] PM: Basic memory bitmaps freed
[11305.878435] video LNXVIDEO:00: Restoring backlight state
[11307.386478] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[11307.432843] ADDRCONF(NETDEV_UP): eth0: link is not ready
[15108.518246] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex
[15108.518263] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
[15108.519216] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[15118.536046] eth0: no IPv6 routers present
[15176.600858] tg3 0000:02:00.0: eth0: Link is down
[15181.252417] tg3 0000:02:00.0: PME# enabled
[15181.288164] tg3 0000:02:00.0: wake-up capability enabled by ACPI
[15183.421597] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[15183.421611] PM: Basic memory bitmaps created
[15183.501651] Syncing filesystems ... done.
[15183.508975] Freezing user space processes ... (elapsed 0.01 seconds) done.
[15183.524255] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[15183.543189] PM: Preallocating image memory... done (allocated 141753 pages)
[15183.900535] PM: Allocated 567012 kbytes in 0.35 seconds (1620.03 MB/s)
[15183.900541] Suspending console(s) (use no_console_suspend to debug)
[15183.901443] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[15183.902766] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[15183.903089] pci 0000:00:1f.3: PCI INT B disabled
[15183.903316] ata2: port disabled. ignoring.
[15183.903420] ata_piix 0000:00:1f.1: PCI INT B disabled
[15184.008372] HDA Intel 0000:00:1b.0: PCI INT A disabled
[15184.009939] ata_piix 0000:00:1f.2: PCI INT B disabled
[15184.024243] PM: freeze of devices complete after 123.306 msecs
[15184.024940] PM: late freeze of devices complete after 0.680 msecs
[15184.024987] ACPI: Preparing to enter system sleep state S4
[15184.117586] PM: Saving platform NVS memory
[15184.117864] Disabling non-boot CPUs ...
[15184.220099] CPU 1 is now offline
[15184.220110] SMP alternatives: switching to UP code
[15184.228292] Extended CMOS year: 2000
[15184.228403] PM: Creating hibernation image:
[15184.232018] PM: Need to copy 113859 pages
[15184.232018] PM: Normal pages needed: 103802 + 1024, available pages: 135744
[15184.232018] PM: Restoring platform NVS memory
[15184.232018] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[15184.232018] CPU0: Thermal monitoring handled by SMI
[15184.232018] Extended CMOS year: 2000
[15184.232018] Enabling non-boot CPUs ...
[15184.232018] SMP alternatives: switching to SMP code
[15184.235336] Booting Node 0 Processor 1 APIC 0x1
[15184.227119] Initializing CPU#1
[15184.227119] CPU1: Thermal monitoring handled by SMI
[15184.324763] NMI watchdog enabled, takes one hw-pmu counter.
[15184.329366] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[15184.332157] CPU1 is up
[15184.332331] ACPI: Waking up from system sleep state S4
[15184.420481] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[15184.420985] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[15184.421030] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[15184.421211] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[15184.421880] PM: early restore of devices complete after 1.546 msecs
[15184.495331] i915 0000:00:02.0: setting latency timer to 64
[15184.499670] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[15184.499687] HDA Intel 0000:00:1b.0: setting latency timer to 64
[15184.499757] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[15184.499831] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[15184.499842] pci 0000:00:1c.0: setting latency timer to 64
[15184.499862] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[15184.499872] pci 0000:00:1c.1: setting latency timer to 64
[15184.499891] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[15184.499901] pci 0000:00:1c.2: setting latency timer to 64
[15184.499918] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[15184.499968] usb usb2: root hub lost power or was reset
[15184.499990] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[15184.500078] usb usb3: root hub lost power or was reset
[15184.500100] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[15184.500147] usb usb4: root hub lost power or was reset
[15184.500167] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[15184.500214] usb usb5: root hub lost power or was reset
[15184.500236] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[15184.500275] usb usb1: root hub lost power or was reset
[15184.504161] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[15184.504187] pci 0000:00:1e.0: setting latency timer to 64
[15184.504215] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[15184.504226] ata_piix 0000:00:1f.1: setting latency timer to 64
[15184.504272] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[15184.504283] ata_piix 0000:00:1f.2: setting latency timer to 64
[15184.504315] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[15184.504537] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[15184.506271] ata2: port disabled. ignoring.
[15184.506830] sd 2:0:0:0: [sda] Starting disk
[15184.728727] ata3.00: configured for UDMA/133
[15184.972165] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[15185.240139] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[15185.484160] usb 1-7: reset high speed USB device using ehci_hcd and address 6
[15185.728129] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[15185.883614] btusb 3-2:1.0: no reset_resume for driver btusb?
[15185.883629] btusb 3-2:1.1: no reset_resume for driver btusb?
[15185.884240] PM: restore of devices complete after 1389.402 msecs
[15185.901014] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[15185.901028] Restarting tasks ... done.
[15185.978664] PM: Basic memory bitmaps freed
[15185.978680] video LNXVIDEO:00: Restoring backlight state
[15189.309386] tg3 0000:02:00.0: wake-up capability disabled by ACPI
[15189.309446] tg3 0000:02:00.0: PME# disabled
[15189.309673] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[15189.344602] ADDRCONF(NETDEV_UP): eth0: link is not ready
[15200.876157] usbcore: deregistering interface driver cdc_acm
[15200.941579] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[15200.943936] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[15200.948861] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[15200.949662] usbcore: registered new interface driver cdc_acm
[15200.949672] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[15227.636112] usbcore: deregistering interface driver cdc_acm
[15227.695975] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[15227.697956] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[15227.699128] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[15227.700113] usbcore: registered new interface driver cdc_acm
[15227.700124] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[15292.559303] usbcore: deregistering interface driver cdc_acm
[15292.618817] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[15292.621012] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[15292.622058] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[15292.622664] usbcore: registered new interface driver cdc_acm
[15292.622673] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[15511.307018] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[15511.307032] PM: Basic memory bitmaps created
[15511.377796] Syncing filesystems ... done.
[15511.388904] Freezing user space processes ... (elapsed 0.01 seconds) done.
[15511.404279] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[15511.423029] PM: Preallocating image memory... done (allocated 141753 pages)
[15512.057979] PM: Allocated 567012 kbytes in 0.63 seconds (900.01 MB/s)
[15512.057985] Suspending console(s) (use no_console_suspend to debug)
[15512.059962] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[15512.060373] pci 0000:00:1f.3: PCI INT B disabled
[15512.060585] ata2: port disabled. ignoring.
[15512.061407] ata_piix 0000:00:1f.1: PCI INT B disabled
[15512.164271] HDA Intel 0000:00:1b.0: PCI INT A disabled
[15512.260136] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[15512.260845] ata_piix 0000:00:1f.2: PCI INT B disabled
[15512.260914] PM: freeze of devices complete after 202.556 msecs
[15512.261611] PM: late freeze of devices complete after 0.676 msecs
[15512.261652] ACPI: Preparing to enter system sleep state S4
[15512.353617] PM: Saving platform NVS memory
[15512.353920] Disabling non-boot CPUs ...
[15512.456102] CPU 1 is now offline
[15512.456113] SMP alternatives: switching to UP code
[15512.464389] Extended CMOS year: 2000
[15512.464500] PM: Creating hibernation image:
[15512.468019] PM: Need to copy 110125 pages
[15512.468019] PM: Normal pages needed: 94483 + 1024, available pages: 133893
[15512.468019] PM: Restoring platform NVS memory
[15512.468019] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[15512.468019] CPU0: Thermal monitoring handled by SMI
[15512.468019] Extended CMOS year: 2000
[15512.468019] Enabling non-boot CPUs ...
[15512.468019] SMP alternatives: switching to SMP code
[15512.473437] Booting Node 0 Processor 1 APIC 0x1
[15512.463201] Initializing CPU#1
[15512.463201] CPU1: Thermal monitoring handled by SMI
[15512.564745] NMI watchdog enabled, takes one hw-pmu counter.
[15512.569327] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[15512.572164] CPU1 is up
[15512.572342] ACPI: Waking up from system sleep state S4
[15512.660477] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[15512.660979] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[15512.661025] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[15512.661206] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[15512.661875] PM: early restore of devices complete after 1.542 msecs
[15512.733342] i915 0000:00:02.0: setting latency timer to 64
[15512.737192] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[15512.737208] HDA Intel 0000:00:1b.0: setting latency timer to 64
[15512.737279] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[15512.737352] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[15512.737363] pci 0000:00:1c.0: setting latency timer to 64
[15512.737383] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[15512.737394] pci 0000:00:1c.1: setting latency timer to 64
[15512.737412] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[15512.737422] pci 0000:00:1c.2: setting latency timer to 64
[15512.737439] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[15512.737489] usb usb2: root hub lost power or was reset
[15512.737511] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[15512.737558] usb usb3: root hub lost power or was reset
[15512.737578] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[15512.737625] usb usb4: root hub lost power or was reset
[15512.737646] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[15512.737692] usb usb5: root hub lost power or was reset
[15512.737715] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[15512.737755] usb usb1: root hub lost power or was reset
[15512.741659] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[15512.741685] pci 0000:00:1e.0: setting latency timer to 64
[15512.741716] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[15512.741726] ata_piix 0000:00:1f.1: setting latency timer to 64
[15512.741772] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[15512.741783] ata_piix 0000:00:1f.2: setting latency timer to 64
[15512.741815] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[15512.742036] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[15512.742630] sd 2:0:0:0: [sda] Starting disk
[15512.745815] ata2: port disabled. ignoring.
[15512.953338] ata3.00: configured for UDMA/133
[15513.208164] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[15513.476125] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[15513.627453] btusb 3-2:1.0: no reset_resume for driver btusb?
[15513.627468] btusb 3-2:1.1: no reset_resume for driver btusb?
[15513.720157] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[15513.964157] usb 1-7: reset high speed USB device using ehci_hcd and address 6
[15514.103526] PM: restore of devices complete after 1370.507 msecs
[15514.120143] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[15514.120154] Restarting tasks ... done.
[15514.181622] PM: Basic memory bitmaps freed
[15514.181638] video LNXVIDEO:00: Restoring backlight state
[15522.573749] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[15522.607754] ADDRCONF(NETDEV_UP): eth0: link is not ready
[15903.739937] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[15903.739951] PM: Basic memory bitmaps created
[15903.798587] Syncing filesystems ... done.
[15903.799898] Freezing user space processes ... (elapsed 0.01 seconds) done.
[15903.816266] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[15903.835347] PM: Preallocating image memory... done (allocated 141755 pages)
[15904.084170] PM: Allocated 567020 kbytes in 0.24 seconds (2362.58 MB/s)
[15904.084176] Suspending console(s) (use no_console_suspend to debug)
[15904.085337] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[15904.086240] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[15904.086466] pci 0000:00:1f.3: PCI INT B disabled
[15904.086638] ata2: port disabled. ignoring.
[15904.086702] ata_piix 0000:00:1f.2: PCI INT B disabled
[15904.086727] ata_piix 0000:00:1f.1: PCI INT B disabled
[15904.188253] HDA Intel 0000:00:1b.0: PCI INT A disabled
[15904.204238] PM: freeze of devices complete after 119.670 msecs
[15904.204931] PM: late freeze of devices complete after 0.677 msecs
[15904.204978] ACPI: Preparing to enter system sleep state S4
[15904.297600] PM: Saving platform NVS memory
[15904.297897] Disabling non-boot CPUs ...
[15904.400115] CPU 1 is now offline
[15904.400126] SMP alternatives: switching to UP code
[15904.408386] Extended CMOS year: 2000
[15904.408497] PM: Creating hibernation image:
[15904.412018] PM: Need to copy 113853 pages
[15904.412018] PM: Normal pages needed: 109049 + 1024, available pages: 141003
[15904.412018] PM: Restoring platform NVS memory
[15904.412018] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[15904.412018] CPU0: Thermal monitoring handled by SMI
[15904.412018] Extended CMOS year: 2000
[15904.412018] Enabling non-boot CPUs ...
[15904.412018] SMP alternatives: switching to SMP code
[15904.415429] Booting Node 0 Processor 1 APIC 0x1
[15904.407130] Initializing CPU#1
[15904.407130] CPU1: Thermal monitoring handled by SMI
[15904.504776] NMI watchdog enabled, takes one hw-pmu counter.
[15904.509367] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[15904.512167] CPU1 is up
[15904.512340] ACPI: Waking up from system sleep state S4
[15904.604468] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[15904.604970] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[15904.605015] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[15904.605196] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[15904.605864] PM: early restore of devices complete after 1.540 msecs
[15904.679427] i915 0000:00:02.0: setting latency timer to 64
[15904.683322] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[15904.683339] HDA Intel 0000:00:1b.0: setting latency timer to 64
[15904.683409] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[15904.683482] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[15904.683493] pci 0000:00:1c.0: setting latency timer to 64
[15904.683513] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[15904.683523] pci 0000:00:1c.1: setting latency timer to 64
[15904.683542] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[15904.683552] pci 0000:00:1c.2: setting latency timer to 64
[15904.683570] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[15904.683619] usb usb2: root hub lost power or was reset
[15904.683641] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[15904.683688] usb usb3: root hub lost power or was reset
[15904.683709] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[15904.683756] usb usb4: root hub lost power or was reset
[15904.683776] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[15904.683822] usb usb5: root hub lost power or was reset
[15904.683845] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[15904.683884] usb usb1: root hub lost power or was reset
[15904.687780] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[15904.687806] pci 0000:00:1e.0: setting latency timer to 64
[15904.687835] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[15904.687845] ata_piix 0000:00:1f.1: setting latency timer to 64
[15904.687893] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[15904.687904] ata_piix 0000:00:1f.2: setting latency timer to 64
[15904.687939] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[15904.688188] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[15904.689918] ata2: port disabled. ignoring.
[15904.690658] sd 2:0:0:0: [sda] Starting disk
[15904.917354] ata3.00: configured for UDMA/133
[15905.156156] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[15905.424157] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[15905.575465] btusb 3-2:1.0: no reset_resume for driver btusb?
[15905.575480] btusb 3-2:1.1: no reset_resume for driver btusb?
[15905.668158] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[15905.912284] usb 1-7: reset high speed USB device using ehci_hcd and address 6
[15906.052173] PM: restore of devices complete after 1373.213 msecs
[15906.068584] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[15906.068597] Restarting tasks ... done.
[15906.181532] PM: Basic memory bitmaps freed
[15906.181550] video LNXVIDEO:00: Restoring backlight state
[15908.476321] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[15908.524801] ADDRCONF(NETDEV_UP): eth0: link is not ready
[15923.293573] usbcore: deregistering interface driver cdc_acm
[15923.423408] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[15923.425494] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[15923.426449] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[15923.428415] usbcore: registered new interface driver cdc_acm
[15923.428425] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[15955.979795] usbcore: deregistering interface driver cdc_acm
[15956.047827] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[15956.049337] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[15956.050469] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[15956.051344] usbcore: registered new interface driver cdc_acm
[15956.051353] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[16104.792127] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[16104.792141] PM: Basic memory bitmaps created
[16104.871311] Syncing filesystems ... done.
[16104.872899] Freezing user space processes ... (elapsed 0.01 seconds) done.
[16104.888274] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[16104.907129] PM: Preallocating image memory... done (allocated 141761 pages)
[16105.164222] PM: Allocated 567044 kbytes in 0.25 seconds (2268.17 MB/s)
[16105.164228] Suspending console(s) (use no_console_suspend to debug)
[16105.164990] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[16105.165891] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[16105.166758] pci 0000:00:1f.3: PCI INT B disabled
[16105.167527] ata2: port disabled. ignoring.
[16105.167620] ata_piix 0000:00:1f.1: PCI INT B disabled
[16105.268256] HDA Intel 0000:00:1b.0: PCI INT A disabled
[16105.819380] ata_piix 0000:00:1f.2: PCI INT B disabled
[16105.819436] PM: freeze of devices complete after 654.824 msecs
[16105.820125] PM: late freeze of devices complete after 0.678 msecs
[16105.820174] ACPI: Preparing to enter system sleep state S4
[16105.913651] PM: Saving platform NVS memory
[16105.913965] Disabling non-boot CPUs ...
[16106.016278] CPU 1 is now offline
[16106.016288] SMP alternatives: switching to UP code
[16106.024425] Extended CMOS year: 2000
[16106.024536] PM: Creating hibernation image:
[16106.028017] PM: Need to copy 113866 pages
[16106.028017] PM: Normal pages needed: 106818 + 1024, available pages: 138746
[16106.028017] PM: Restoring platform NVS memory
[16106.028017] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[16106.028017] CPU0: Thermal monitoring handled by SMI
[16106.028017] Extended CMOS year: 2000
[16106.028017] Enabling non-boot CPUs ...
[16106.028017] SMP alternatives: switching to SMP code
[16106.031699] Booting Node 0 Processor 1 APIC 0x1
[16106.023249] Initializing CPU#1
[16106.023249] CPU1: Thermal monitoring handled by SMI
[16106.120802] NMI watchdog enabled, takes one hw-pmu counter.
[16106.125406] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[16106.128169] CPU1 is up
[16106.128342] ACPI: Waking up from system sleep state S4
[16106.216472] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[16106.216974] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[16106.217019] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[16106.217199] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfeff0000)
[16106.217867] PM: early restore of devices complete after 1.541 msecs
[16106.291333] i915 0000:00:02.0: setting latency timer to 64
[16106.295881] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[16106.295897] HDA Intel 0000:00:1b.0: setting latency timer to 64
[16106.295968] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[16106.296084] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[16106.296094] pci 0000:00:1c.0: setting latency timer to 64
[16106.296114] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[16106.296124] pci 0000:00:1c.1: setting latency timer to 64
[16106.296143] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[16106.296154] pci 0000:00:1c.2: setting latency timer to 64
[16106.296170] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[16106.296220] usb usb2: root hub lost power or was reset
[16106.296242] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[16106.296289] usb usb3: root hub lost power or was reset
[16106.296310] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[16106.296356] usb usb4: root hub lost power or was reset
[16106.296376] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[16106.296423] usb usb5: root hub lost power or was reset
[16106.296444] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[16106.296484] usb usb1: root hub lost power or was reset
[16106.300390] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[16106.300415] pci 0000:00:1e.0: setting latency timer to 64
[16106.300444] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[16106.300455] ata_piix 0000:00:1f.1: setting latency timer to 64
[16106.300500] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[16106.300510] ata_piix 0000:00:1f.2: setting latency timer to 64
[16106.300543] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[16106.300764] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[16106.301162] sd 2:0:0:0: [sda] Starting disk
[16106.303158] ata2: port disabled. ignoring.
[16106.516859] ata3.00: configured for UDMA/133
[16106.768128] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[16107.036160] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[16107.190164] btusb 3-2:1.0: no reset_resume for driver btusb?
[16107.190179] btusb 3-2:1.1: no reset_resume for driver btusb?
[16107.288155] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[16107.532152] usb 1-7: reset high speed USB device using ehci_hcd and address 6
[16107.671256] PM: restore of devices complete after 1380.259 msecs
[16107.688047] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[16107.688057] Restarting tasks ... done.
[16107.834945] PM: Basic memory bitmaps freed
[16107.834960] video LNXVIDEO:00: Restoring backlight state
[16111.042374] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[16111.088875] ADDRCONF(NETDEV_UP): eth0: link is not ready
[16117.020214] usbcore: deregistering interface driver cdc_acm
[16117.082729] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[16117.084236] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[16117.085743] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[16117.086684] usbcore: registered new interface driver cdc_acm
[16117.086694] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[18335.252181] usbcore: deregistering interface driver cdc_acm
[18335.312088] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[18335.313519] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[18335.314650] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[18335.315287] usbcore: registered new interface driver cdc_acm
[18335.315297] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[18452.731604] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[18452.731617] PM: Basic memory bitmaps created
[18452.828766] Syncing filesystems ... done.
[18452.830448] Freezing user space processes ... (elapsed 0.01 seconds) done.
[18452.844260] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[18452.863128] PM: Preallocating image memory... done (allocated 141765 pages)
[18453.179081] PM: Allocated 567060 kbytes in 0.31 seconds (1829.22 MB/s)
[18453.179086] Suspending console(s) (use no_console_suspend to debug)
[18453.179917] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[18453.180883] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[18453.181239] pci 0000:00:1f.3: PCI INT B disabled
[18453.181467] ata2: port disabled. ignoring.
[18453.182187] ata_piix 0000:00:1f.1: PCI INT B disabled
[18453.284279] HDA Intel 0000:00:1b.0: PCI INT A disabled
[18453.371876] ata_piix 0000:00:1f.2: PCI INT B disabled
[18453.371929] PM: freeze of devices complete after 192.466 msecs
[18453.372637] PM: late freeze of devices complete after 0.697 msecs
[18453.372686] ACPI: Preparing to enter system sleep state S4
[18453.465628] PM: Saving platform NVS memory
[18453.465947] Disabling non-boot CPUs ...
[18453.568105] CPU 1 is now offline
[18453.568116] SMP alternatives: switching to UP code
[18453.576412] Extended CMOS year: 2000
[18453.576523] PM: Creating hibernation image:
[18453.580018] PM: Need to copy 113766 pages
[18453.580018] PM: Normal pages needed: 104511 + 1024, available pages: 136639
[18453.580018] PM: Restoring platform NVS memory
[18453.580018] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[18453.580018] CPU0: Thermal monitoring handled by SMI
[18453.580018] Extended CMOS year: 2000
[18453.580018] Enabling non-boot CPUs ...
[18453.580018] SMP alternatives: switching to SMP code
[18453.583455] Booting Node 0 Processor 1 APIC 0x1
[18453.575163] Initializing CPU#1
[18453.575163] CPU1: Thermal monitoring handled by SMI
[18453.672755] NMI watchdog enabled, takes one hw-pmu counter.
[18453.677353] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[18453.680146] CPU1 is up
[18453.680322] ACPI: Waking up from system sleep state S4
[18453.768473] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[18453.768976] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[18453.769022] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[18453.769202] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[18453.769874] PM: early restore of devices complete after 1.545 msecs
[18453.843256] i915 0000:00:02.0: setting latency timer to 64
[18453.847601] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[18453.847617] HDA Intel 0000:00:1b.0: setting latency timer to 64
[18453.847688] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[18453.847760] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[18453.847771] pci 0000:00:1c.0: setting latency timer to 64
[18453.847791] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[18453.847801] pci 0000:00:1c.1: setting latency timer to 64
[18453.847820] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[18453.847831] pci 0000:00:1c.2: setting latency timer to 64
[18453.847847] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[18453.847897] usb usb2: root hub lost power or was reset
[18453.847920] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[18453.847967] usb usb3: root hub lost power or was reset
[18453.847988] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[18453.848019] usb usb4: root hub lost power or was reset
[18453.848085] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[18453.848133] usb usb5: root hub lost power or was reset
[18453.848156] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[18453.848195] usb usb1: root hub lost power or was reset
[18453.852089] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[18453.852115] pci 0000:00:1e.0: setting latency timer to 64
[18453.852144] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[18453.852155] ata_piix 0000:00:1f.1: setting latency timer to 64
[18453.852199] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[18453.852210] ata_piix 0000:00:1f.2: setting latency timer to 64
[18453.852244] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[18453.852465] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[18453.853049] sd 2:0:0:0: [sda] Starting disk
[18453.856233] ata2: port disabled. ignoring.
[18454.080657] ata3.00: configured for UDMA/133
[18454.320162] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[18454.564162] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[18454.832163] usb 1-7: reset high speed USB device using ehci_hcd and address 6
[18455.076136] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[18455.228749] btusb 3-2:1.0: no reset_resume for driver btusb?
[18455.228758] btusb 3-2:1.1: no reset_resume for driver btusb?
[18455.229252] PM: restore of devices complete after 1386.364 msecs
[18455.246534] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[18455.246547] Restarting tasks ... done.
[18455.322673] PM: Basic memory bitmaps freed
[18455.322692] video LNXVIDEO:00: Restoring backlight state
[18458.701580] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[18458.735201] ADDRCONF(NETDEV_UP): eth0: link is not ready
[18486.776756] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex
[18486.776773] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
[18486.777727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[18491.612264] usbcore: deregistering interface driver cdc_acm
[18491.676237] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[18491.677515] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[18491.684815] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[18491.687515] usbcore: registered new interface driver cdc_acm
[18491.687525] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[18496.928074] eth0: no IPv6 routers present
[19131.171479] ssh[18954]: segfault at 18f ip b754b3c0 sp bfd53570 error 4 in libcrypto.so.1.0.0[b74d8000+18a000]
[19134.928546] ssh[18960]: segfault at 18f ip b75933c0 sp bf9d5220 error 4 in libcrypto.so.1.0.0[b7520000+18a000]
[19147.885766] ssh[18966]: segfault at 18f ip b76993c0 sp bf995ff0 error 4 in libcrypto.so.1.0.0[b7626000+18a000]
[19152.380887] ssh[18969]: segfault at 18f ip b75863c0 sp bf9017f0 error 4 in libcrypto.so.1.0.0[b7513000+18a000]
[19219.360255] ssh[18989]: segfault at 18f ip b769a3c0 sp bf857950 error 4 in libcrypto.so.1.0.0[b7627000+18a000]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.37.4-17-vanilla (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP 2011-03-15 00:05:21 +0100
[ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6d0000 - 000000003f6e2000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f6e2000 - 000000003f6e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f6e3000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: LENOVO 4329A11 /Kuril , BIOS 14CN88WW 03/20/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3f6d0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f7b70] f7b70
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ b1f000-c00000
[ 0.000000] RAMDISK: 37580000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 36b10000 - 3757f5fd
[ 0.000000] Move RAMDISK from 0000000037580000 - 0000000037fef5fc to 36b10000 - 3757f5fc
[ 0.000000] ACPI: RSDP 000f7a60 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 3f6da15b 0007C (v01 PTLTD ? XSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 3f6e1d4d 000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 3f6db355 06984 (v01 INTEL CALISTGA 06040000 INTL 20061109)
[ 0.000000] ACPI: FACS 3f6e2fc0 00040
[ 0.000000] ACPI: HPET 3f6e1e41 00038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 3f6e1e79 0003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TCPA 3f6e1eb5 00032 (v01 PTLTD CALISTGA 06040000 PTL 00000001)
[ 0.000000] ACPI: TMOR 3f6e1ee7 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: APIC 3f6e1f0d 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 3f6e1f75 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: ASF! 3f6e1f9d 00063 (v16 CETP CETP 06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 3f6da773 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3f6da6cd 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3f6da1d7 004F6 (v02 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f6d0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f6d0
[ 0.000000] On node 0 totalpages: 259679
[ 0.000000] free_area_init_node: node 0, pgdat c07d0700, node_mem_map f6320200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 254 pages used for memmap
[ 0.000000] HighMem zone: 32212 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f77df000 s27200 r0 d21952 u49152
[ 0.000000] pcpu-alloc: s27200 r0 d21952 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257649
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD1600BEVS-08VAT2_WD-WXE309PV6424-part1 resume=/dev/disk/by-id/ata-WDC_WD1600BEVS-08VAT2_WD-WXE309PV6424-part2 splash=silent quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5195520 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f6d0)
[ 0.000000] Memory: 1005564k/1039168k available (4024k kernel code, 33152k reserved, 1987k data, 428k init, 129864k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd35000 - 0xfffff000 (2856 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07e0000 - 0xc084b000 ( 428 kB)
[ 0.000000] .data : 0xc05ee0dc - 0xc07df028 (1987 kB)
[ 0.000000] .text : 0xc0200000 - 0xc05ee0dc (4024 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.038 MHz processor.
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.07 BogoMIPS (lpj=6384152)
[ 0.004021] pid_max: default: 32768 minimum: 301
[ 0.004109] Security Framework initialized
[ 0.004134] AppArmor: AppArmor initialized
[ 0.004257] Mount-cache hash table entries: 512
[ 0.004472] Initializing cgroup subsys ns
[ 0.004482] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.004488] Initializing cgroup subsys cpuacct
[ 0.004497] Initializing cgroup subsys memory
[ 0.004513] Initializing cgroup subsys devices
[ 0.004518] Initializing cgroup subsys freezer
[ 0.004523] Initializing cgroup subsys net_cls
[ 0.004527] Initializing cgroup subsys blkio
[ 0.004583] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.004592] CPU: Physical Processor ID: 0
[ 0.004596] CPU: Processor Core ID: 0
[ 0.004601] mce: CPU supports 5 MCE banks
[ 0.004614] CPU0: Thermal monitoring enabled (TM1)
[ 0.004621] using mwait in idle threads.
[ 0.004634] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.004649] ... version: 3
[ 0.004653] ... bit width: 40
[ 0.004656] ... generic registers: 2
[ 0.004661] ... value mask: 000000ffffffffff
[ 0.004665] ... max period: 000000007fffffff
[ 0.004669] ... fixed-purpose events: 3
[ 0.004673] ... event mask: 0000000700000003
[ 0.008122] ACPI: Core revision 20101013
[ 0.024120] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024533] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064547] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.068000] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.068000] CPU 1 irqstacks, hard=f58cc000 soft=f58ce000
[ 0.068000] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.160056] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.160139] Brought up 2 CPUs
[ 0.160147] Total of 2 processors activated (6384.00 BogoMIPS).
[ 0.160473] devtmpfs: initialized
[ 0.160473] regulator: core version 0.5
[ 0.160473] regulator: dummy:
[ 0.160473] Time: 17:03:34 Date: 03/23/11
[ 0.160545] NET: Registered protocol family 16
[ 0.160931] ACPI: bus type pci registered
[ 0.161107] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.161116] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.161120] PCI: Using MMCONFIG for extended config space
[ 0.161126] PCI: Using configuration type 1 for base access
[ 0.164192] bio: create slab <bio-0> at 0
[ 0.167060] ACPI: EC: Look up EC in DSDT
[ 0.177308] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.179515] ACPI: SSDT 3f6db03c 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.180343] ACPI: Dynamic OEM Table Load:
[ 0.180352] ACPI: SSDT (null) 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.181045] ACPI: SSDT 3f6da9d2 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.181788] ACPI: Dynamic OEM Table Load:
[ 0.181796] ACPI: SSDT (null) 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.182742] ACPI: SSDT 3f6db281 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.183518] ACPI: Dynamic OEM Table Load:
[ 0.183527] ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.183871] ACPI: SSDT 3f6dafb7 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.184639] ACPI: Dynamic OEM Table Load:
[ 0.184647] ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.188331] ACPI: Interpreter enabled
[ 0.188346] ACPI: (supports S0 S3 S4 S5)
[ 0.188398] ACPI: Using IOAPIC for interrupt routing
[ 0.211472] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.211954] ACPI: No dock devices found.
[ 0.211965] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.213415] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.216259] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.216267] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.216274] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.216282] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.216288] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.216296] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff]
[ 0.216326] pci 0000:00:00.0: [8086:27ac] type 0 class 0x000600
[ 0.216395] pci 0000:00:02.0: [8086:27ae] type 0 class 0x000300
[ 0.216413] pci 0000:00:02.0: reg 10: [mem 0xf0500000-0xf057ffff]
[ 0.216424] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.216436] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.216447] pci 0000:00:02.0: reg 1c: [mem 0xf0600000-0xf063ffff]
[ 0.216498] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
[ 0.216513] pci 0000:00:02.1: reg 10: [mem 0xf0580000-0xf05fffff]
[ 0.216639] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.216670] pci 0000:00:1b.0: reg 10: [mem 0xf0640000-0xf0643fff 64bit]
[ 0.216772] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.216782] pci 0000:00:1b.0: PME# disabled
[ 0.216822] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.216928] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.216937] pci 0000:00:1c.0: PME# disabled
[ 0.216982] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.217087] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.217096] pci 0000:00:1c.1: PME# disabled
[ 0.217138] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.217242] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.217251] pci 0000:00:1c.2: PME# disabled
[ 0.217300] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.217371] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.217427] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.217498] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.217562] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.217632] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.217688] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.217758] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.217829] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.217863] pci 0000:00:1d.7: reg 10: [mem 0xf0844000-0xf08443ff]
[ 0.217976] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.217985] pci 0000:00:1d.7: PME# disabled
[ 0.218020] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.218128] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[ 0.218246] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.218255] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.218268] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0380 (mask 0007)
[ 0.218322] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[ 0.218346] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.218364] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.218382] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.218400] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.218418] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
[ 0.218482] pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
[ 0.218509] pci 0000:00:1f.2: reg 10: [io 0x18c8-0x18cf]
[ 0.218526] pci 0000:00:1f.2: reg 14: [io 0x18c0-0x18c3]
[ 0.218543] pci 0000:00:1f.2: reg 18: [io 0x18a8-0x18af]
[ 0.218561] pci 0000:00:1f.2: reg 1c: [io 0x180c-0x180f]
[ 0.218577] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf]
[ 0.218595] pci 0000:00:1f.2: reg 24: [mem 0xf0844400-0xf08447ff]
[ 0.218639] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.218647] pci 0000:00:1f.2: PME# disabled
[ 0.218674] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.218752] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff]
[ 0.218988] pci 0000:02:00.0: [14e4:1713] type 0 class 0x000200
[ 0.219064] pci 0000:02:00.0: reg 10: [mem 0xf0200000-0xf020ffff 64bit]
[ 0.219385] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.219400] pci 0000:02:00.0: PME# disabled
[ 0.219553] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.219562] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.219572] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.219586] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.219664] pci 0000:00:1c.1: PCI bridge to [bus 03-04]
[ 0.219672] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.219682] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.219695] pci 0000:00:1c.1: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.220037] pci 0000:05:00.0: [14e4:4315] type 0 class 0x000280
[ 0.220114] pci 0000:05:00.0: reg 10: [mem 0xf0400000-0xf0403fff 64bit]
[ 0.220420] pci 0000:05:00.0: supports D1 D2
[ 0.220426] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.220441] pci 0000:05:00.0: PME# disabled
[ 0.220624] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.220634] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
[ 0.220644] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.220657] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.220762] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.220772] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.220781] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.220794] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.220802] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.220808] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.220815] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.220822] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.220829] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.220836] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[ 0.220873] pci_bus 0000:00: on NUMA node 0
[ 0.220885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.221323] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.221482] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.221635] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.221849] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.235488] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.235679] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15)
[ 0.235863] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.236066] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.236258] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.236446] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.236635] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.236821] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.236902] HEST: Table is not found!
[ 0.237066] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.237088] vgaarb: loaded
[ 0.237506] SCSI subsystem initialized
[ 0.237614] PCI: Using ACPI for IRQ routing
[ 0.237614] PCI: pci_cache_line_size set to 64 bytes
[ 0.237614] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.237614] reserve RAM buffer: 000000003f6d0000 - 000000003fffffff
[ 0.237614] NetLabel: Initializing
[ 0.237614] NetLabel: domain hash size = 128
[ 0.237614] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.237614] NetLabel: unlabeled traffic allowed by default
[ 0.237614] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.237614] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.237614] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.244066] Switching to clocksource tsc
[ 0.246476] AppArmor: AppArmor Filesystem Enabled
[ 0.246514] pnp: PnP ACPI init
[ 0.246573] ACPI: bus type pnp registered
[ 0.250673] pnp 00:00: [bus 00-ff]
[ 0.250683] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.250689] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.250695] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.250702] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.250708] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.250714] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.250720] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.250726] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.250732] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.250738] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.250744] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.250750] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.250756] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.250763] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.250769] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.250775] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.250781] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.250787] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[ 0.250793] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.250957] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.251047] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.251053] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.251059] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.251065] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.251070] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.251076] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.251081] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.251087] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.251205] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.251823] pnp 00:02: [io 0x0000-0x001f]
[ 0.251830] pnp 00:02: [io 0x0081-0x0091]
[ 0.251836] pnp 00:02: [io 0x0093-0x009f]
[ 0.251841] pnp 00:02: [io 0x00c0-0x00df]
[ 0.251847] pnp 00:02: [dma 4]
[ 0.251957] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.252212] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.252349] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.252391] pnp 00:04: [io 0x00f0]
[ 0.252411] pnp 00:04: [irq 13]
[ 0.252513] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.252552] pnp 00:05: [io 0x0061]
[ 0.252558] pnp 00:05: [io 0x0063]
[ 0.252563] pnp 00:05: [io 0x0065]
[ 0.252568] pnp 00:05: [io 0x0067]
[ 0.252576] pnp 00:05: [io 0x0070]
[ 0.252581] pnp 00:05: [io 0x0080]
[ 0.252586] pnp 00:05: [io 0x0092]
[ 0.252591] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.252597] pnp 00:05: [io 0x0800-0x080f]
[ 0.252602] pnp 00:05: [io 0x1000-0x107f]
[ 0.252607] pnp 00:05: [io 0x1180-0x11bf]
[ 0.252612] pnp 00:05: [io 0x1640-0x164f]
[ 0.252617] pnp 00:05: [io 0xfe00]
[ 0.252622] pnp 00:05: [io 0x0380-0x0384]
[ 0.252628] pnp 00:05: [io 0x0386-0x0387]
[ 0.252789] pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.252873] pnp 00:06: [io 0x06a0-0x06af]
[ 0.252879] pnp 00:06: [io 0x06b0-0x06ff]
[ 0.253011] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.253044] pnp 00:07: [io 0x0070-0x0077]
[ 0.253058] pnp 00:07: [irq 8]
[ 0.253160] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.253242] pnp 00:08: [io 0x0060]
[ 0.253248] pnp 00:08: [io 0x0064]
[ 0.253260] pnp 00:08: [irq 1]
[ 0.253366] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.253405] pnp 00:09: [irq 12]
[ 0.253521] pnp 00:09: Plug and Play ACPI device, IDs SYN1024 SYN1000 SYN0002 PNP0f13 (active)
[ 0.253599] pnp: PnP ACPI: found 10 devices
[ 0.253604] ACPI: ACPI bus type pnp unregistered
[ 0.253612] PnPBIOS: Disabled by ACPI PNP
[ 0.253642] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.253650] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.253657] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.253665] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.253672] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.253679] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.253687] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.253694] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.253708] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.253723] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.253731] system 00:05: [io 0x1000-0x107f] has been reserved
[ 0.253738] system 00:05: [io 0x1180-0x11bf] has been reserved
[ 0.253745] system 00:05: [io 0x1640-0x164f] has been reserved
[ 0.253752] system 00:05: [io 0xfe00] has been reserved
[ 0.253758] system 00:05: [io 0x0380-0x0384] has been reserved
[ 0.253765] system 00:05: [io 0x0386-0x0387] has been reserved
[ 0.253778] system 00:06: [io 0x06a0-0x06af] has been reserved
[ 0.253784] system 00:06: [io 0x06b0-0x06ff] has been reserved
[ 0.294081] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.294095] pci 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.294102] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.294110] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.294121] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.294131] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.294144] pci 0000:00:1c.1: PCI bridge to [bus 03-04]
[ 0.294152] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.294163] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.294172] pci 0000:00:1c.1: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.294186] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.294193] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.294204] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.294213] pci 0000:00:1c.2: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.294227] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.294231] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.294241] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.294250] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.294296] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.294307] pci 0000:00:1c.0: setting latency timer to 64
[ 0.294327] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.294337] pci 0000:00:1c.1: setting latency timer to 64
[ 0.294357] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.294366] pci 0000:00:1c.2: setting latency timer to 64
[ 0.294382] pci 0000:00:1e.0: setting latency timer to 64
[ 0.294391] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.294397] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.294404] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.294410] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.294416] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.294423] pci_bus 0000:00: resource 9 [mem 0x40000000-0xfebfffff]
[ 0.294430] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.294436] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.294443] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.294450] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.294456] pci_bus 0000:03: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.294462] pci_bus 0000:03: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.294469] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.294475] pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.294482] pci_bus 0000:05: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.294489] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.294495] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.294501] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.294508] pci_bus 0000:06: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.294514] pci_bus 0000:06: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.294521] pci_bus 0000:06: resource 9 [mem 0x40000000-0xfebfffff]
[ 0.294670] NET: Registered protocol family 2
[ 0.294832] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.295497] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.296527] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.297029] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.297036] TCP reno registered
[ 0.297048] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.297069] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.297404] NET: Registered protocol family 1
[ 0.297451] pci 0000:00:02.0: Boot video device
[ 0.297861] PCI: CLS 64 bytes, default 64
[ 0.297979] Unpacking initramfs...
[ 0.771691] Freeing initrd memory: 10688k freed
[ 0.782931] Simple Boot Flag at 0x36 set to 0x1
[ 0.783750] Scanning for low memory corruption every 60 seconds
[ 0.784144] audit: initializing netlink socket (disabled)
[ 0.784178] type=2000 audit(1300899814.780:1): initialized
[ 0.814128] highmem bounce pool size: 64 pages
[ 0.814141] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.814544] VFS: Disk quotas dquot_6.5.2
[ 0.814620] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.814937] msgmni has been set to 1731
[ 0.815361] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.815423] io scheduler noop registered
[ 0.815430] io scheduler deadline registered
[ 0.815477] io scheduler cfq registered (default)
[ 0.816149] intel_idle: MWAIT substates: 0x20220
[ 0.816172] intel_idle: v0.4 model 0x1C
[ 0.816177] intel_idle: lapic_timer_reliable_states 0x2
[ 0.816194] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.816281] ERST: Table is not found!
[ 0.816322] isapnp: Scanning for PnP cards...
[ 1.170241] isapnp: No Plug & Play device found
[ 1.170789] Switching to clocksource hpet
[ 1.171083] Non-volatile memory driver v1.3
[ 1.171089] Linux agpgart interface v0.103
[ 1.171301] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.171492] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.171656] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.175389] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.175574] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.217692] Fixed MDIO Bus: probed
[ 1.217814] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.229855] Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 1.229861] If AUX port is really absent please use the 'i8042.noaux' option.
[ 1.243745] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.243762] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.244059] mice: PS/2 mouse device common for all mice
[ 1.246308] cpuidle: using governor ladder
[ 1.246582] cpuidle: using governor menu
[ 1.247166] TCP cubic registered
[ 1.247321] NET: Registered protocol family 10
[ 1.248126] lo: Disabled Privacy Extensions
[ 1.248637] Registering the dns_resolver key type
[ 1.248781] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5)
[ 1.248817] Using IPI No-Shortcut mode
[ 1.249101] PM: Checking hibernation image partition /dev/disk/by-id/ata-WDC_WD1600BEVS-08VAT2_WD-WXE309PV6424-part2
[ 1.266181] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.293847] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
[ 2.364606] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
[ 2.372168] PM: Hibernation image not present or could not be loaded.
[ 2.372217] registered taskstats version 1
[ 2.372985] Magic number: 3:27:88
[ 2.373271] Freeing unused kernel memory: 428k freed
[ 2.373635] Write protecting the kernel text: 4028k
[ 2.373707] Write protecting the kernel read-only data: 1732k
[ 2.472556] ACPI: acpi_idle yielding to intel_idle
[ 2.489850] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.489858] ACPI: Thermal Zone [TZ00] (58 C)
[ 2.508757] udev[70]: starting version 166
[ 2.597201] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 2.597383] ACPI: Power Button [PWRB]
[ 2.597587] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 2.597736] ACPI: Sleep Button [SLPB]
[ 2.597937] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 2.864495] usbcore: registered new interface driver usbfs
[ 2.864639] usbcore: registered new interface driver hub
[ 2.864779] usbcore: registered new device driver usb
[ 2.865256] libata version 3.00 loaded.
[ 2.896645] ACPI: Lid Switch [LID]
[ 2.896922] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 2.897092] ACPI: Power Button [PWRF]
[ 2.959673] acpi device:04: registered as cooling_device2
[ 2.960178] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 2.960353] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.996834] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.996938] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.997002] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.997013] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.997081] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.035058] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 3.035086] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.038997] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 3.039050] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0844000
[ 3.052073] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.052141] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.052151] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.052160] usb usb1: Product: EHCI Host Controller
[ 3.052167] usb usb1: Manufacturer: Linux 2.6.37.4-17-vanilla ehci_hcd
[ 3.052175] usb usb1: SerialNumber: 0000:00:1d.7
[ 3.052627] hub 1-0:1.0: USB hub found
[ 3.052644] hub 1-0:1.0: 8 ports detected
[ 3.053823] ata_piix 0000:00:1f.1: version 2.13
[ 3.053878] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.054020] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.055780] scsi0 : ata_piix
[ 3.056378] scsi1 : ata_piix
[ 3.058043] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 3.058053] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 3.058133] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.058147] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 3.058835] ata2: port disabled. ignoring.
[ 3.084706] rtc_cmos 00:07: RTC can wake from S4
[ 3.096929] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.104343] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.104403] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.212130] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.213693] scsi2 : ata_piix
[ 3.214112] scsi3 : ata_piix
[ 3.214303] ata3: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b0 irq 19
[ 3.214313] ata4: SATA max UDMA/133 cmd 0x18a8 ctl 0x180c bmdma 0x18b8 irq 19
[ 3.214725] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.214748] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.214757] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.214786] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.228173] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 3.228333] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.228341] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.228347] usb usb2: Product: UHCI Host Controller
[ 3.228352] usb usb2: Manufacturer: Linux 2.6.37.4-17-vanilla uhci_hcd
[ 3.228358] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.228729] hub 2-0:1.0: USB hub found
[ 3.228748] hub 2-0:1.0: 2 ports detected
[ 3.228983] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.229001] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.229009] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.229030] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.229133] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 3.229224] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.229231] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.229237] usb usb3: Product: UHCI Host Controller
[ 3.229242] usb usb3: Manufacturer: Linux 2.6.37.4-17-vanilla uhci_hcd
[ 3.229247] usb usb3: SerialNumber: 0000:00:1d.1
[ 3.229586] hub 3-0:1.0: USB hub found
[ 3.229604] hub 3-0:1.0: 2 ports detected
[ 3.229815] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.229831] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.229839] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.229858] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.229985] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 3.230074] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.230081] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.230087] usb usb4: Product: UHCI Host Controller
[ 3.230092] usb usb4: Manufacturer: Linux 2.6.37.4-17-vanilla uhci_hcd
[ 3.230098] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.230443] hub 4-0:1.0: USB hub found
[ 3.230460] hub 4-0:1.0: 2 ports detected
[ 3.230678] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 3.230694] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.230701] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.230721] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.230843] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 3.230931] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.230938] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.230944] usb usb5: Product: UHCI Host Controller
[ 3.230949] usb usb5: Manufacturer: Linux 2.6.37.4-17-vanilla uhci_hcd
[ 3.230954] usb usb5: SerialNumber: 0000:00:1d.3
[ 3.231297] hub 5-0:1.0: USB hub found
[ 3.231314] hub 5-0:1.0: 2 ports detected
[ 3.364160] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 3.425458] ata3.00: ATA-8: WDC WD1600BEVS-08VAT2, 14.01A14, max UDMA/133
[ 3.425476] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.433107] ata3.00: configured for UDMA/133
[ 3.433507] scsi 2:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 14.0 PQ: 0 ANSI: 5
[ 3.434413] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 3.434674] sd 2:0:0:0: [sda] Write Protect is off
[ 3.434687] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.434796] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.463876] sda: sda1 sda2 sda3
[ 3.465350] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.537330] [drm] Initialized drm 1.1.0 20060810
[ 3.617233] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.617248] i915 0000:00:02.0: setting latency timer to 64
[ 3.682515] usb 1-3: New USB device found, idVendor=5986, idProduct=0241
[ 3.682525] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 3.682534] usb 1-3: Product: Lenovo EasyCamera
[ 3.682540] usb 1-3: Manufacturer: BISON Corporation
[ 3.729004] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.729516] [drm] initialized overlay support
[ 3.936160] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 4.031280] Console: switching to colour frame buffer device 128x36
[ 4.037971] fb0: inteldrmfb frame buffer device
[ 4.037976] drm: registered panic notifier
[ 4.038242] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.079408] usb 1-5: New USB device found, idVendor=0bda, idProduct=0158
[ 4.079421] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.079431] usb 1-5: Product: USB2.0-CRW
[ 4.079438] usb 1-5: Manufacturer: Generic
[ 4.079446] usb 1-5: SerialNumber: 20071114173400000
[ 4.133918] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 4.133929] PM: Basic memory bitmaps created
[ 4.148437] PM: Basic memory bitmaps freed
[ 4.148450] video LNXVIDEO:00: Restoring backlight state
[ 4.196140] usb 1-7: new high speed USB device using ehci_hcd and address 5
[ 4.237880] PM: Starting manual resume from disk
[ 4.237888] PM: Hibernation image partition 8:2 present
[ 4.237892] PM: Looking for hibernation image.
[ 4.238285] PM: Image not found (code -22)
[ 4.238294] PM: Hibernation image not present or could not be loaded.
[ 4.332290] usb 1-7: New USB device found, idVendor=0bdb, idProduct=1900
[ 4.332308] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.332321] usb 1-7: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
[ 4.332333] usb 1-7: Manufacturer: Ericsson
[ 4.332343] usb 1-7: SerialNumber: 0115650004270950
[ 4.584121] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 4.642875] EXT3-fs: barriers not enabled
[ 4.643403] kjournald starting. Commit interval 5 seconds
[ 4.644000] EXT3-fs (sda1): using internal journal
[ 4.644060] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 4.755266] usb 3-2: New USB device found, idVendor=0a5c, idProduct=2150
[ 4.755285] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.755300] usb 3-2: Product: BCM2046 Bluetooth Device
[ 4.755310] usb 3-2: Manufacturer: Broadcom Corp
[ 4.755323] usb 3-2: SerialNumber: 00242CF78FB9
[ 8.673217] udev[420]: starting version 166
[ 9.217188] intel_rng: FWH not detected
[ 9.281938] ACPI: Battery Slot [BAT0] (battery present)
[ 9.290286] ACPI: AC Adapter [ACAD] (on-line)
[ 9.359656] wmi: Mapper loaded
[ 9.398903] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 9.413620] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.435267] Bluetooth: Core ver 2.15
[ 9.435343] NET: Registered protocol family 31
[ 9.435349] Bluetooth: HCI device and connection manager initialized
[ 9.435357] Bluetooth: HCI socket layer initialized
[ 9.516823] iTCO_vendor_support: vendor-support=0
[ 9.567103] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 9.567361] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[ 9.567550] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.760444] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.770170] Linux video capture interface: v2.00
[ 9.865579] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 9.866096] usbcore: registered new interface driver btusb
[ 9.881291] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9.881309] ACPI: resource 0000:00:1f.3 [io 0x18e0-0x18ff] conflicts with ACPI region SMBI [??? 0x000018e0-0x000018ef flags 0x49]
[ 9.881319] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.946580] leds_ss4200: no LED devices found
[ 9.952514] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0241)
[ 9.957164] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input8
[ 9.957425] usbcore: registered new interface driver uvcvideo
[ 9.957433] USB Video Class driver (v1.0.0)
[ 10.299764] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 10.299901] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[ 10.299965] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.301050] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 10.307940] tg3.c:v3.115 (October 14, 2010)
[ 10.308118] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.308183] tg3 0000:02:00.0: setting latency timer to 64
[ 10.388134] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:23:8b:95:a7:20
[ 10.388146] tg3 0000:02:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
[ 10.388154] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
[ 10.388162] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 10.442886] ALSA patch_realtek.c:1521: SKU: Nid=0x1d sku_cfg=0x4015812d
[ 10.442900] ALSA patch_realtek.c:1523: SKU: port_connectivity=0x1
[ 10.442910] ALSA patch_realtek.c:1524: SKU: enable_pcbeep=0x1
[ 10.442919] ALSA patch_realtek.c:1525: SKU: check_sum=0x00000005
[ 10.442928] ALSA patch_realtek.c:1526: SKU: customization=0x00000081
[ 10.442937] ALSA patch_realtek.c:1527: SKU: external_amp=0x5
[ 10.442945] ALSA patch_realtek.c:1528: SKU: platform_type=0x1
[ 10.442954] ALSA patch_realtek.c:1529: SKU: swap=0x0
[ 10.442962] ALSA patch_realtek.c:1530: SKU: override=0x1
[ 10.446264] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 10.446535] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.544772] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.544803] b43-pci-bridge 0000:05:00.0: setting latency timer to 64
[ 10.564646] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[ 10.564676] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[ 10.564702] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[ 10.564727] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[ 10.612432] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0
[ 10.691070] cfg80211: Calling CRDA to update world regulatory domain
[ 11.113407] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[ 11.676649] cfg80211: World regulatory domain updated:
[ 11.676657] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.676666] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.676672] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.676679] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.676685] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.676692] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.798120] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.800213] Registered led device: b43-phy0::tx
[ 11.800332] Registered led device: b43-phy0::rx
[ 11.800436] Registered led device: b43-phy0::radio
[ 11.800488] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
[ 11.812485] usb 1-5: selecting invalid altsetting 1
[ 11.815076] usbcore: registered new interface driver uas
[ 11.908541] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 11.910489] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 11.911819] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 11.912865] usbcore: registered new interface driver cdc_acm
[ 11.912874] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 11.933950] Initializing USB Mass Storage driver...
[ 11.934606] cdc_wdm 1-7:1.5: cdc-wdm0: USB WDM device
[ 11.934773] cdc_wdm 1-7:1.6: cdc-wdm1: USB WDM device
[ 11.934854] usbcore: registered new interface driver cdc_wdm
[ 11.935952] scsi4 : usb-storage 1-5:1.0
[ 11.936573] usbcore: registered new interface driver usb-storage
[ 11.936581] USB Mass Storage support registered.
[ 11.960502] cdc_ether 1-7:1.7: wwan0: register 'cdc_ether' at usb-0000:00:1d.7-7, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 11.960608] usbcore: registered new interface driver cdc_ether
[ 12.004820] usbcore: registered new interface driver zaurus
[ 12.681425] Adding 1566332k swap on /dev/sda2. Priority:-1 extents:1 across:1566332k
[ 12.938692] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 12.939342] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 12.949153] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 13.278409] device-mapper: uevent: version 1.0.3
[ 13.278969] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[ 16.272262] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x20a
[ 16.546890] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x20a
[ 16.551325] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 17.476012] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[ 17.483696] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[ 17.528920] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.786419] nf_conntrack version 0.5.0 (15885 buckets, 63540 max)
[ 17.830830] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 25.461579] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 27.023678] Bluetooth: L2CAP ver 2.15
[ 27.023686] Bluetooth: L2CAP socket layer initialized
[ 27.237758] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 27.237767] Bluetooth: BNEP filters: protocol multicast
[ 27.326177] Bluetooth: SCO (Voice Link) ver 0.6
[ 27.326186] Bluetooth: SCO socket layer initialized
[ 27.650142] Bluetooth: RFCOMM TTY layer initialized
[ 27.650159] Bluetooth: RFCOMM socket layer initialized
[ 27.650165] Bluetooth: RFCOMM ver 1.11
[ 29.311852] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[ 29.349857] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.976681] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 30.976692] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
[ 30.977358] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 31.512767] NET: Registered protocol family 17
[ 41.744019] eth0: no IPv6 routers present
[ 43.639081] padlock: VIA PadLock Hash Engine not detected.
[ 43.752108] device-mapper: ioctl: unable to remove open device temporary-cryptsetup-2114
[ 45.259732] EXT3-fs: barriers not enabled
[ 45.277717] kjournald starting. Commit interval 5 seconds
[ 45.277871] EXT3-fs (dm-0): warning: maximal mount count reached, running e2fsck is recommended
[ 45.278675] EXT3-fs (dm-0): using internal journal
[ 45.278694] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[ 47.686946] start_kdeinit (2263): /proc/2263/oom_adj is deprecated, please use /proc/2263/oom_score_adj instead.
[ 71.667968] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 242.427514] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:23:8b:95:a7:20:00:1d:7d:d2:c3:3d:08:00 SRC=192.168.0.2 DST=192.168.0.13 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=22579 DF PROTO=TCP SPT=49475 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A004EAB470000000001030307)
[unhandled content-type:application/octet-stream]
\
 
 \ /
  Last update: 2011-03-23 17:33    [W:0.146 / U:8.944 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site