lkml.org 
[lkml]   [2011]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[46/87] USB: isp1760: Implement solution for erratum 2
2.6.37-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

commit b14e840d04dba211fbdc930247e379085623eacd upstream.

The document says:
|2.1 Problem description
| When at least two USB devices are simultaneously running, it is observed that
| sometimes the INT corresponding to one of the USB devices stops occurring. This may
| be observed sometimes with USB-to-serial or USB-to-network devices.
| The problem is not noticed when only USB mass storage devices are running.
|2.2 Implication
| This issue is because of the clearing of the respective Done Map bit on reading the ATL
| PTD Done Map register when an INT is generated by another PTD completion, but is not
| found set on that read access. In this situation, the respective Done Map bit will remain
| reset and no further INT will be asserted so the data transfer corresponding to that USB
| device will stop.
|2.3 Workaround
| An SOF INT can be used instead of an ATL INT with polling on Done bits. A time-out can
| be implemented and if a certain Done bit is never set, verification of the PTD completion
| can be done by reading PTD contents (valid bit).
| This is a proven workaround implemented in software.

Russell King run into this with an USB-to-serial converter. This patch
implements his suggestion to enable the high frequent SOF interrupt only
at the time we have ATL packages queued. It goes even one step further
and enables the SOF interrupt only if we have more than one ATL packet
queued at the same time.

Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
drivers/usb/host/isp1760-hcd.c | 22 ++++++++++++++++------
drivers/usb/host/isp1760-hcd.h | 1 +
2 files changed, 17 insertions(+), 6 deletions(-)

--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -33,6 +33,7 @@ struct isp1760_hcd {
struct inter_packet_info atl_ints[32];
struct inter_packet_info int_ints[32];
struct memory_chunk memory_pool[BLOCKS];
+ u32 atl_queued;

/* periodic schedule support */
#define DEFAULT_I_TDPS 1024
@@ -850,6 +851,11 @@ static void enqueue_an_ATL_packet(struct
skip_map &= ~queue_entry;
isp1760_writel(skip_map, hcd->regs + HC_ATL_PTD_SKIPMAP_REG);

+ priv->atl_queued++;
+ if (priv->atl_queued == 2)
+ isp1760_writel(INTERRUPT_ENABLE_SOT_MASK,
+ hcd->regs + HC_INTERRUPT_ENABLE);
+
buffstatus = isp1760_readl(hcd->regs + HC_BUFFER_STATUS_REG);
buffstatus |= ATL_BUFFER;
isp1760_writel(buffstatus, hcd->regs + HC_BUFFER_STATUS_REG);
@@ -992,6 +998,7 @@ static void do_atl_int(struct usb_hcd *u
u32 dw3;

status = 0;
+ priv->atl_queued--;

queue_entry = __ffs(done_map);
done_map &= ~(1 << queue_entry);
@@ -1054,11 +1061,6 @@ static void do_atl_int(struct usb_hcd *u
* device is not able to send data fast enough.
* This happens mostly on slower hardware.
*/
- printk(KERN_NOTICE "Reloading ptd %p/%p... qh %p read: "
- "%d of %zu done: %08x cur: %08x\n", qtd,
- urb, qh, PTD_XFERRED_LENGTH(dw3),
- qtd->length, done_map,
- (1 << queue_entry));

/* RL counter = ERR counter */
dw3 &= ~(0xf << 19);
@@ -1086,6 +1088,11 @@ static void do_atl_int(struct usb_hcd *u
priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs +
atl_regs, sizeof(ptd));

+ priv->atl_queued++;
+ if (priv->atl_queued == 2)
+ isp1760_writel(INTERRUPT_ENABLE_SOT_MASK,
+ usb_hcd->regs + HC_INTERRUPT_ENABLE);
+
buffstatus = isp1760_readl(usb_hcd->regs +
HC_BUFFER_STATUS_REG);
buffstatus |= ATL_BUFFER;
@@ -1191,6 +1198,9 @@ static void do_atl_int(struct usb_hcd *u
skip_map = isp1760_readl(usb_hcd->regs +
HC_ATL_PTD_SKIPMAP_REG);
}
+ if (priv->atl_queued <= 1)
+ isp1760_writel(INTERRUPT_ENABLE_MASK,
+ usb_hcd->regs + HC_INTERRUPT_ENABLE);
}

static void do_intl_int(struct usb_hcd *usb_hcd)
@@ -1770,7 +1780,7 @@ static irqreturn_t isp1760_irq(struct us
goto leave;

isp1760_writel(imask, usb_hcd->regs + HC_INTERRUPT_REG);
- if (imask & HC_ATL_INT)
+ if (imask & (HC_ATL_INT | HC_SOT_INT))
do_atl_int(usb_hcd);

if (imask & HC_INTL_INT)
--- a/drivers/usb/host/isp1760-hcd.h
+++ b/drivers/usb/host/isp1760-hcd.h
@@ -69,6 +69,7 @@ void deinit_kmem_cache(void);

#define HC_INTERRUPT_ENABLE 0x314
#define INTERRUPT_ENABLE_MASK (HC_INTL_INT | HC_ATL_INT | HC_EOT_INT)
+#define INTERRUPT_ENABLE_SOT_MASK (HC_INTL_INT | HC_SOT_INT | HC_EOT_INT)

#define HC_ISO_INT (1 << 9)
#define HC_ATL_INT (1 << 8)



\
 
 \ /
  Last update: 2011-03-22 00:47    [W:0.248 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site