lkml.org 
[lkml]   [2011]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[05/44] MIPS: MTX-1: Make au1000_eth probe all PHY addresses
2.6.32-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Florian Fainelli <florian@openwrt.org>

commit bf3a1eb85967dcbaae42f4fcb53c2392cec32677 upstream.

When au1000_eth probes the MII bus for PHY address, if we do not set
au1000_eth platform data's phy_search_highest_address, the MII probing
logic will exit early and will assume a valid PHY is found at address 0.
For MTX-1, the PHY is at address 31, and without this patch, the link
detection/speed/duplex would not work correctly.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2111/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
arch/mips/alchemy/mtx-1/platform.c | 9 +++++++++
1 file changed, 9 insertions(+)

--- a/arch/mips/alchemy/mtx-1/platform.c
+++ b/arch/mips/alchemy/mtx-1/platform.c
@@ -28,6 +28,8 @@
#include <linux/mtd/physmap.h>
#include <mtd/mtd-abi.h>

+#include <asm/mach-au1x00/au1xxx_eth.h>
+
static struct gpio_keys_button mtx1_gpio_button[] = {
{
.gpio = 207,
@@ -140,10 +142,17 @@ static struct __initdata platform_device
&mtx1_mtd,
};

+static struct au1000_eth_platform_data mtx1_au1000_eth0_pdata = {
+ .phy_search_highest_addr = 1,
+ .phy1_search_mac0 = 1,
+};
+
static int __init mtx1_register_devices(void)
{
int rc;

+ au1xxx_override_eth_cfg(0, &mtx1_au1000_eth0_pdata);
+
rc = gpio_request(mtx1_gpio_button[0].gpio,
mtx1_gpio_button[0].desc);
if (rc < 0) {



\
 
 \ /
  Last update: 2011-03-22 00:17    [W:0.130 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site