lkml.org 
[lkml]   [2011]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] regulator: provide consumer interface for fall/rise time
Date
From: Linus Walleij <linus.walleij@linaro.org>

This exposes the functionality for rise/fall fime when setting
voltage to the consumers.

Cc: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/regulator/core.c | 45 ++++++++++++++++++++++++++++++++++++
include/linux/regulator/consumer.h | 2 +
2 files changed, 47 insertions(+), 0 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 569b198..ca398b4 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1765,6 +1765,51 @@ out:
EXPORT_SYMBOL_GPL(regulator_set_voltage);

/**
+ * regulator_set_voltage_time - get raise/fall time
+ * @regulator: regulator source
+ * @old_uV: starting voltage in microvolts
+ * @new_uV: target voltage in microvolts
+ *
+ * Provided with the starting and ending voltage, this function attempts to
+ * calculate the time in microseconds required to rise or fall to this new
+ * voltage.
+ */
+int regulator_set_voltage_time(struct regulator *regulator,
+ int old_uV, int new_uV)
+{
+ struct regulator_dev *rdev = regulator->rdev;
+ struct regulator_ops *ops = rdev->desc->ops;
+ int old_sel = -1;
+ int new_sel = -1;
+ int voltage;
+ int i;
+
+ /* Currently requires operations to do this */
+ if (!ops->list_voltage || !ops->set_voltage_time_sel
+ || !rdev->desc->n_voltages)
+ return -EINVAL;
+
+ for (i = 0; i < rdev->desc->n_voltages; i++) {
+ /* We only look for exact voltage matches here */
+ voltage = regulator_list_voltage(regulator, i);
+ if (voltage < 0)
+ return -EINVAL;
+ if (voltage == 0)
+ continue;
+ if (voltage == old_uV)
+ old_sel = i;
+ if (voltage == new_uV)
+ new_sel = i;
+ }
+
+ if (old_sel < 0 || new_sel < 0)
+ return -EINVAL;
+
+ return ops->set_voltage_time_sel(rdev, old_sel, new_sel);
+}
+EXPORT_SYMBOL_GPL(regulator_set_voltage_time);
+
+/**
* regulator_sync_voltage - re-apply last regulator output voltage
* @regulator: regulator source
*
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 7954f6b..9e87c1c 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -153,6 +153,8 @@ int regulator_list_voltage(struct regulator *regulator, unsigned selector);
int regulator_is_supported_voltage(struct regulator *regulator,
int min_uV, int max_uV);
int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV);
+int regulator_set_voltage_time(struct regulator *regulator,
+ int old_uV, int new_uV);
int regulator_get_voltage(struct regulator *regulator);
int regulator_sync_voltage(struct regulator *regulator);
int regulator_set_current_limit(struct regulator *regulator,
--
1.7.3.2


\
 
 \ /
  Last update: 2011-03-17 13:27    [W:0.033 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site