lkml.org 
[lkml]   [2011]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/6] serial: ifx6x60: set SPI max_speed_hz based on platform type
Date
Platforms containing the 6260 can run up to 25Mhz.

For these platforms set max_speed_hz to 25Mhz.

Signed-off-by: Russ Gorby <russ.gorby@intel.com>
---
drivers/tty/serial/ifx6x60.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index 9161cab..766f0c3 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -722,7 +722,7 @@ static void ifx_spi_io(unsigned long data)
/* note len is BYTES, not transfers */
ifx_dev->spi_xfer.len = IFX_SPI_TRANSFER_SIZE;
ifx_dev->spi_xfer.cs_change = 0;
- ifx_dev->spi_xfer.speed_hz = 12500000;
+ ifx_dev->spi_xfer.speed_hz = ifx_dev->spi_dev->max_speed_hz;
/* ifx_dev->spi_xfer.speed_hz = 390625; */
ifx_dev->spi_xfer.bits_per_word = spi_bpw;

@@ -992,6 +992,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
ifx_dev->modem = pl_data->modem_type;
ifx_dev->use_dma = pl_data->use_dma;
ifx_dev->max_hz = pl_data->max_hz;
+ spi->max_speed_hz = ifx_dev->max_hz;

/* ensure SPI protocol flags are initialized to enable transfer */
ifx_dev->spi_more = 0;
--
1.7.3.4


\
 
 \ /
  Last update: 2011-02-07 21:01    [W:0.163 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site