lkml.org 
[lkml]   [2011]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectIntel ICH9 bug : sata / serial_usb conflict
Hello,

I have encountered a big bug (system unusable) when using newer hardware
(Intel ICH9) here, so I have decided to try a newer kernel, namely
2.6.37-20-desktop (opensuse 11.4 rc1), but the problem remains.

I have a perfectly running linux kernel and applications, but when I
start listening to a USB GPS receiver, access to my sata disk stops working :(
until a reboot.

Is that a known (an fixed) problem ?

Here is a console log excerpt showing the messages appearing after I start
listening to my GPS USB receiver, recorded using netconsole :

ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:08:88:40:01/00:00:00:00:00/e2 tag 0 dma 4096 in
res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: hard resetting link
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: qc timeout (cmd 0x27)
ata1.00: failed to read native max address (err_mask=0x4)
ata1.00: revalidation failed (errno=-5)
ata1: hard resetting link
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: qc timeout (cmd 0x27)
ata1.00: failed to read native max address (err_mask=0x4)
ata1.00: revalidation failed (errno=-5)
ata1: limiting SATA link speed to 1.5 Gbps
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: qc timeout (cmd 0x27)
ata1.00: failed to read native max address (err_mask=0x4)
ata1.00: revalidation failed (errno=-5)
ata1.00: disabled
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1: EH complete
sd 0:0:0:0: [sda] Unhandled error code
sd 0:0:0:0: [sda] 10.1.40.199 : Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 0:0:0:0: [sda] CDB: 10.1.40.199 : Read(10)10.1.40.199 : :10.1.40.199 : 2810.1.40.199 : 0010.1.40.199 : 0210.1.40.199 : 0110.1.40.199 : 4010.1.40.199 : 8810.1.40.199 : 0010.1.40.199 : 0010.1.40.199 : 0810.1.40.199 : 0010.1.40.199 :
end_request: I/O error, dev sda, sector 33636488
sd 0:0:0:0: [sda] Unhandled error code
sd 0:0:0:0: [sda] 10.1.40.199 : Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 0:0:0:0: [sda] CDB: 10.1.40.199 : Write(10)10.1.40.199 : :10.1.40.199 : 2a10.1.40.199 : 0010.1.40.199 : 0010.1.40.199 : 4110.1.40.199 : 6710.1.40.199 : d810.1.40.199 : 0010.1.40.199 : 0010.1.40.199 : 0810.1.40.199 : 0010.1.40.199 :
end_request: I/O error, dev sda, sector 4286424
quiet_error: 45 callbacks suppressed
Buffer I/O error on device sda2, logical block 9723
lost page write due to I/O error on sda2
sd 0:0:0:0: [sda] Unhandled error code
sd 0:0:0:0: [sda] 10.1.40.199 : Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 0:0:0:0: [sda] CDB: 10.1.40.199 : Write(10)10.1.40.199 : :10.1.40.199 : 2a10.1.40.199 : 0010.1.40.199 : 0110.1.40.199 : 8410.1.40.199 : 5e10.1.40.199 : 3010.1.40.199 : 0010.1.40.199 : 0410.1.40.199 : 0010.1.40.199 : 0010.1.40.199 :
end_request: I/O error, dev sda, sector 25452080
Buffer I/O error on device sda2, logical block 2655430
lost page write due to I/O error on sda2
sd 0:0:0:0: [sda] Unhandled error code
sd 0:0:0:0: [sda] 10.1.40.199 : Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 0:0:0:0: [sda] CDB: 10.1.40.199 : Write(10)10.1.40.199 : :10.1.40.199 : 2a10.1.40.199 : 0010.1.40.199 : 0110.1.40.199 : 8410.1.40.199 : 6210.1.40.199 : 3010.1.40.199 : 0010.1.40.199 : 0010.1.40.199 : c810.1.40.199 : 0010.1.40.199 :
end_request: I/O error, dev sda, sector 25453104
JBD2: Detected IO errors while flushing file data on sda2-8
Aborting journal on device sda2-8.
EXT4-fs (sda2): 10.1.40.199 : delayed block allocation failed for inode 793538 at logical offset 0 with max blocks 1 with error -3010.1.40.199 :
EXT4-fs (sda2): 10.1.40.199 : This should not happen!! Data will be lost
10.1.40.199 : [ 150.577419]
EXT4-fs error (device sda2) in ext4_da_writepages:3074: Journal has aborted

and here are some hardware info's :

tmp199:~ # lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.5 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03)
02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
06:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev 46)
tmp199:~ #

Ask for more info if needed.

Thanks in advance

Philippe

--
Philippe De Muyter +32 2 6101532 Macq SA rue de l'Aeronef 2 B-1140 Bruxelles


\
 
 \ /
  Last update: 2011-02-26 12:37    [W:0.028 / U:0.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site