lkml.org 
[lkml]   [2011]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 4/5] hwmon: (pmbus) Add support for Maxim MAX34440/MAX34441
One trivial formatting nitpick.
Dug out datasheet for this one..
I'm a little unclear how value from there map to those stored in here...
On 02/17/11 19:00, Guenter Roeck wrote:
> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

> ---
> drivers/hwmon/Kconfig | 10 +++
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/max34440.c | 198 ++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 209 insertions(+), 0 deletions(-)
> create mode 100644 drivers/hwmon/max34440.c
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 723cadd..3568a3b 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -767,6 +767,16 @@ config SENSORS_MAX16064
> This driver can also be built as a module. If so, the module will
> be called max16064.
>
> +config SENSORS_MAX34440
> + tristate "Maxim MAX34440/MAX34441"
> + default n
> + help
> + If you say yes here you get hardware monitoring support for Maxim
> + MAX34440 and MAX34441.
> +
> + This driver can also be built as a module. If so, the module will
> + be called max34440.
> +
> config SENSORS_MAX8688
> tristate "Maxim MAX8688"
> default n
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 9c83d0d..905a1f6 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -116,6 +116,7 @@ obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
> obj-$(CONFIG_PMBUS) += pmbus_core.o
> obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
> obj-$(CONFIG_SENSORS_MAX16064) += max16064.o
> +obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
> obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
>
> ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
> diff --git a/drivers/hwmon/max34440.c b/drivers/hwmon/max34440.c
> new file mode 100644
> index 0000000..6b71bcc
> --- /dev/null
> +++ b/drivers/hwmon/max34440.c
> @@ -0,0 +1,198 @@
> +/*
> + * Hardware monitoring driver for Maxim MAX34440/MAX34441
> + *
> + * Copyright (c) 2011 Ericsson AB.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include "pmbus.h"
> +
> +enum chips { max34440, max34441 };
> +
> +#define MAX34440_STATUS_OC_WARN (1 << 0)
> +#define MAX34440_STATUS_OC_FAULT (1 << 1)
> +#define MAX34440_STATUS_OT_FAULT (1 << 5)
> +#define MAX34440_STATUS_OT_WARN (1 << 6)
> +
> +static int max34440_get_status(struct i2c_client *client, int page, int reg)
> +{
> + int ret;
> + int mfg_status;
> +
> + ret = pmbus_set_page(client, page);
> + if (ret < 0)
> + return ret;
> +
> + switch (reg) {
> + case PMBUS_STATUS_IOUT:
> + mfg_status = pmbus_read_word_data(client, 0,
> + PMBUS_STATUS_MFR_SPECIFIC);
> + if (mfg_status < 0)
> + return mfg_status;
> + if (mfg_status & MAX34440_STATUS_OC_WARN)
> + ret |= PB_IOUT_OC_WARNING;
> + if (mfg_status & MAX34440_STATUS_OC_FAULT)
> + ret |= PB_IOUT_OC_FAULT;
> + break;
> + case PMBUS_STATUS_TEMPERATURE:
> + mfg_status = pmbus_read_word_data(client, 0,
> + PMBUS_STATUS_MFR_SPECIFIC);
> + if (mfg_status < 0)
> + return mfg_status;
> + if (mfg_status & MAX34440_STATUS_OT_WARN)
> + ret |= PB_TEMP_OT_WARNING;
> + if (mfg_status & MAX34440_STATUS_OT_FAULT)
> + ret |= PB_TEMP_OT_FAULT;
> + break;
> + default:
> + ret = -ENODATA;
> + break;
> + }
> + return ret;
> +}
New line here.
> +static struct pmbus_driver_info max34440_info[] = {
> + [max34440] = {
> + .pages = 14,
> + .direct[PSC_VOLTAGE_IN] = true,
> + .direct[PSC_VOLTAGE_OUT] = true,
> + .direct[PSC_TEMPERATURE] = true,
> + .direct[PSC_CURRENT_OUT] = true,
> + .m[PSC_VOLTAGE_IN] = 1,
> + .b[PSC_VOLTAGE_IN] = 0,
> + .R[PSC_VOLTAGE_IN] = 3,
> + .m[PSC_VOLTAGE_OUT] = 1,
> + .b[PSC_VOLTAGE_OUT] = 0,
> + .R[PSC_VOLTAGE_OUT] = 3,
> + .m[PSC_CURRENT_OUT] = 1,
> + .b[PSC_CURRENT_OUT] = 0,
> + .R[PSC_CURRENT_OUT] = 3,
Table 3 of datasheet says R for current is 0... I may be missing
something though!
> + .m[PSC_TEMPERATURE] = 1,
> + .b[PSC_TEMPERATURE] = 0,
> + .R[PSC_TEMPERATURE] = 2,
> + .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
> + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
> + .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
> + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
> + .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
> + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
> + .func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
> + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
> + .func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
> + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
> + .func[5] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
> + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
> + .func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
> + .func[7] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
> + .func[8] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
> + .func[9] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
> + .func[10] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
> + .func[11] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
> + .func[12] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
> + .func[13] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
> + .get_status = max34440_get_status,
> + },
> + [max34441] = {
> + .pages = 12,
> + .direct[PSC_VOLTAGE_IN] = true,
> + .direct[PSC_VOLTAGE_OUT] = true,
> + .direct[PSC_TEMPERATURE] = true,
> + .direct[PSC_CURRENT_OUT] = true,
> + .direct[PSC_FAN] = true,
> + .m[PSC_VOLTAGE_IN] = 1,
> + .b[PSC_VOLTAGE_IN] = 0,
> + .R[PSC_VOLTAGE_IN] = 3,
> + .m[PSC_VOLTAGE_OUT] = 1,
> + .b[PSC_VOLTAGE_OUT] = 0,
> + .R[PSC_VOLTAGE_OUT] = 3,
> + .m[PSC_CURRENT_OUT] = 1,
> + .b[PSC_CURRENT_OUT] = 0,
> + .R[PSC_CURRENT_OUT] = 3,
Again, table 3 seems to indicate this should be 0 not 3. Am I reading
it wrong? Please explain how these numbers are reached...

> + .m[PSC_TEMPERATURE] = 1,
> + .b[PSC_TEMPERATURE] = 0,
> + .R[PSC_TEMPERATURE] = 2,
> + .m[PSC_FAN] = 1,
> + .b[PSC_FAN] = 0,
> + .R[PSC_FAN] = 0,
> + .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
> + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
> + .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
> + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
> + .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
> + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
> + .func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
> + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
> + .func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
> + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
> + .func[5] = PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12,
> + .func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
> + .func[7] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
> + .func[8] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
> + .func[9] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
> + .func[10] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
> + .func[11] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
> + .get_status = max34440_get_status,
> + },
> +};
> +
> +static int max34440_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + return pmbus_do_probe(client, id, &max34440_info[id->driver_data]);
> +}
> +
> +static int max34440_remove(struct i2c_client *client)
> +{
> + return pmbus_do_remove(client);
> +}
> +
> +static const struct i2c_device_id max34440_id[] = {
> + {"max34440", max34440},
> + {"max34441", max34441},
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, max34440_id);
> +
> +/* This is the driver that will be inserted */
> +static struct i2c_driver max34440_driver = {
> + .driver = {
> + .name = "max34440",
> + },
> + .probe = max34440_probe,
> + .remove = max34440_remove,
> + .id_table = max34440_id,
> +};
> +
> +static int __init max34440_init(void)
> +{
> + return i2c_add_driver(&max34440_driver);
> +}
> +
> +static void __exit max34440_exit(void)
> +{
> + i2c_del_driver(&max34440_driver);
> +}
> +
> +MODULE_AUTHOR("Guenter Roeck");
> +MODULE_DESCRIPTION("PMBus driver for Maxim MAX34440/MAX34441");
> +MODULE_LICENSE("GPL");
> +module_init(max34440_init);
> +module_exit(max34440_exit);



\
 
 \ /
  Last update: 2011-02-25 21:43    [W:0.144 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site