lkml.org 
[lkml]   [2011]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] Add PRUSS UIO driver support
Date
This patch series add support for PRUSS (Programmable Real-time Unit Sub
System) UIO driver in Texas Instruments DA850, AM18xx and OMAPL1-38 processors.
PRUSS is programmable RISC core which can be used to implement Soft IPs
(eg:- DMA, CAN, UART,SmartCard) and Industrial communications data link layers
(eg:- PROFIBUS). UIO driver exposes PRUSS resources like memory and
interrupts to user space application.PRUSS UIO application API can be used
to control PRUs in PRUSS, setup PRU INTC, load firmware to PRUs and implement
IPC between Host processor and PRUs. More information on PRUSS and UIO linux
user space API available in the links below

http://processors.wiki.ti.com/index.php/Programmable_Realtime_Unit_Subsystem
http://processors.wiki.ti.com/index.php/PRU_Linux_Application_Loader
http://processors.wiki.ti.com/index.php/PRU_Linux_Application_Loader_API_Guide


Pratheesh Gangadhar (2):
PRUSS UIO driver support
Defines DA850/AM18xx/OMAPL1-38 SOC resources used by PRUSS UIO driver

arch/arm/mach-davinci/board-da850-evm.c | 4 +
arch/arm/mach-davinci/da850.c | 35 ++++
arch/arm/mach-davinci/devices-da8xx.c | 73 +++++++++
arch/arm/mach-davinci/include/mach/da8xx.h | 3 +
drivers/uio/Kconfig | 9 +
drivers/uio/Makefile | 1 +
drivers/uio/uio_pruss.c | 231 ++++++++++++++++++++++++++++
7 files changed, 356 insertions(+), 0 deletions(-)
create mode 100644 drivers/uio/uio_pruss.c



\
 
 \ /
  Last update: 2011-02-21 18:39    [W:0.488 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site