lkml.org 
[lkml]   [2011]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/14] bq27x00: Give more specific reports on battery status
Date
The current code only reports whether the battery is charging or
discharging. But the battery also reports whether it is fully charged,
furthermore by look at if the battery is supplied we can tell whether it
is discharging or not charging.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Rodolfo Giometti <giometti@linux.it>
---
drivers/power/bq27x00_battery.c | 7 ++++++-
1 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
index d2e6423..e371b01 100644
--- a/drivers/power/bq27x00_battery.c
+++ b/drivers/power/bq27x00_battery.c
@@ -54,6 +54,7 @@
#define BQ27000_REG_RSOC 0x0B /* Relative State-of-Charge */
#define BQ27000_REG_ILMD 0x76 /* Initial last measured discharge */
#define BQ27000_FLAG_CHGS BIT(7)
+#define BQ27000_FLAG_FC BIT(5)

#define BQ27500_REG_SOC 0x2c
#define BQ27500_REG_DCAP 0x3C /* Design capacity */
@@ -365,8 +366,12 @@ static int bq27x00_battery_status(struct bq27x00_device_info *di,
else
status = POWER_SUPPLY_STATUS_CHARGING;
} else {
- if (di->cache.flags & BQ27000_FLAG_CHGS)
+ if (di->cache.flags & BQ27000_FLAG_FC)
+ status = POWER_SUPPLY_STATUS_FULL;
+ else if (di->cache.flags & BQ27000_FLAG_CHGS)
status = POWER_SUPPLY_STATUS_CHARGING;
+ else if (power_supply_am_i_supplied(&di->bat))
+ status = POWER_SUPPLY_STATUS_NOT_CHARGING;
else
status = POWER_SUPPLY_STATUS_DISCHARGING;
}
--
1.7.2.3


\
 
 \ /
  Last update: 2011-02-12 20:43    [W:0.215 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site