lkml.org 
[lkml]   [2011]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 07/10] cpufreq: Add support for x86 cpuinfo auto loading
On Wed, Dec 07, 2011 at 04:41:20PM -0800, Andi Kleen wrote:
> diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c
> index bce576d..069fa86 100644
> --- a/drivers/cpufreq/powernow-k8.c
> +++ b/drivers/cpufreq/powernow-k8.c
> @@ -37,6 +37,7 @@
> #include <linux/delay.h>
>
> #include <asm/msr.h>
> +#include <asm/cpu_device_id.h>
>
> #include <linux/acpi.h>
> #include <linux/mutex.h>
> @@ -514,6 +515,20 @@ static int core_voltage_post_transition(struct powernow_k8_data *data,
> return 0;
> }
>
> +static struct x86_cpu_id powernow_k8_ids[] = {
> + { X86_VENDOR_AMD, 0xf, },
> + /* RED-PEN If HW PSTATE was a normal feature bit it could be matched here
> + * instead of a (limited) model list.
> + */
> + { X86_VENDOR_AMD, 0x10, },
> + { X86_VENDOR_AMD, 0x11, },
> + { X86_VENDOR_AMD, 0x12, },
> + { X86_VENDOR_AMD, 0x13, },
> + { X86_VENDOR_AMD, 0x14, },
> + {}

Well, there is CPUID_8000_0007_EDX[7] which denotes the presence
of the P-state registers. It probably could be added to
init_scattered_cpuid_features() but there's still special handling
needed for K8.

Can you do both a family and a feature bit test with the autoprobing
code?

--
Regards/Gruss,
Boris.

Advanced Micro Devices GmbH
Einsteinring 24, 85609 Dornach
GM: Alberto Bozzo
Reg: Dornach, Landkreis Muenchen
HRB Nr. 43632 WEEE Registernr: 129 19551


\
 
 \ /
  Last update: 2011-12-08 09:53    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site