lkml.org 
[lkml]   [2011]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled.
Date
There is no need to have the clock enabled all the time the driver is
loaded.
It will be enabled anyway in mxs_dma_alloc_chan_resources() when a
channel is actually going to be used.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
drivers/dma/mxs-dma.c | 7 ++-----
1 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
index f228f55..c7574e8 100644
--- a/drivers/dma/mxs-dma.c
+++ b/drivers/dma/mxs-dma.c
@@ -580,7 +580,7 @@ static int __init mxs_dma_init(struct mxs_dma_engine *mxs_dma)

ret = clk_enable(mxs_dma->clk);
if (ret)
- goto err_out;
+ return ret;

ret = mxs_reset_block(mxs_dma->base);
if (ret)
@@ -604,11 +604,8 @@ static int __init mxs_dma_init(struct mxs_dma_engine *mxs_dma)
writel(MXS_DMA_CHANNELS_MASK << MXS_DMA_CHANNELS,
mxs_dma->base + HW_APBHX_CTRL1 + MXS_SET_ADDR);

- clk_disable(mxs_dma->clk);
-
- return 0;
-
err_out:
+ clk_disable(mxs_dma->clk);
return ret;
}

--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2011-12-08 09:19    [W:0.210 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site