lkml.org 
[lkml]   [2011]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] spi-topcliff-pch: Fix issue for transmitting over 4KByte
Date
Currently, when spi-topcliff-pch receives transmit request over 4KByte,
this driver can't process correctly. This driver needs to divide the data
into 4Kbyte unit.
This patch fixes the issue.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
---
drivers/spi/spi-topcliff-pch.c | 66 +++++++++++++++++++++++++++++++++-------
1 files changed, 55 insertions(+), 11 deletions(-)
diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index fcd9462..7339765 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -194,6 +194,7 @@ struct pch_spi_data {
struct pch_spi_dma_ctrl dma;
int use_dma;
u8 irq_reg_sts;
+ int save_total_len;
};

/**
@@ -819,11 +820,13 @@ static void pch_spi_copy_rx_data_for_dma(struct pch_spi_data *data, int bpw)
rx_dma_buf = data->dma.rx_buf_virt;
for (j = 0; j < data->bpw_len; j++)
*rx_buf++ = *rx_dma_buf++ & 0xFF;
+ data->cur_trans->rx_buf = rx_buf;
} else {
rx_sbuf = data->cur_trans->rx_buf;
rx_dma_sbuf = data->dma.rx_buf_virt;
for (j = 0; j < data->bpw_len; j++)
*rx_sbuf++ = *rx_dma_sbuf++;
+ data->cur_trans->rx_buf = rx_sbuf;
}
}

@@ -849,6 +852,9 @@ static int pch_spi_start_transfer(struct pch_spi_data *data)
rtn = wait_event_interruptible_timeout(data->wait,
data->transfer_complete,
msecs_to_jiffies(2 * HZ));
+ if (!rtn)
+ dev_err(&data->master->dev,
+ "%s wait-event timeout\n", __func__);

dma_sync_sg_for_cpu(&data->master->dev, dma->sg_rx_p, dma->nent,
DMA_FROM_DEVICE);
@@ -985,6 +991,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
int i;
int size;
int rem;
+ int head;
unsigned long flags;
struct pch_spi_dma_ctrl *dma;

@@ -1013,6 +1020,11 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
}
data->bpw_len = data->cur_trans->len / (*bpw / 8);

+ if (data->bpw_len > PCH_BUF_SIZE) {
+ data->bpw_len = PCH_BUF_SIZE;
+ data->cur_trans->len -= PCH_BUF_SIZE;
+ }
+
/* copy Tx Data */
if (data->cur_trans->tx_buf != NULL) {
if (*bpw == 8) {
@@ -1027,10 +1039,17 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
*tx_dma_sbuf++ = *tx_sbuf++;
}
}
+
+ /* Calculate Rx parameter for DMA transmitting */
if (data->bpw_len > PCH_DMA_TRANS_SIZE) {
- num = data->bpw_len / PCH_DMA_TRANS_SIZE + 1;
+ if (data->bpw_len % PCH_DMA_TRANS_SIZE) {
+ num = data->bpw_len / PCH_DMA_TRANS_SIZE + 1;
+ rem = data->bpw_len % PCH_DMA_TRANS_SIZE;
+ } else {
+ num = data->bpw_len / PCH_DMA_TRANS_SIZE;
+ rem = PCH_DMA_TRANS_SIZE;
+ }
size = PCH_DMA_TRANS_SIZE;
- rem = data->bpw_len % PCH_DMA_TRANS_SIZE;
} else {
num = 1;
size = data->bpw_len;
@@ -1090,15 +1109,23 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
dma->nent = num;
dma->desc_rx = desc_rx;

- /* TX */
- if (data->bpw_len > PCH_DMA_TRANS_SIZE) {
- num = data->bpw_len / PCH_DMA_TRANS_SIZE;
+ /* Calculate Tx parameter for DMA transmitting */
+ if (data->bpw_len > PCH_MAX_FIFO_DEPTH) {
+ head = PCH_MAX_FIFO_DEPTH - PCH_DMA_TRANS_SIZE;
+ if (data->bpw_len % PCH_DMA_TRANS_SIZE > 4) {
+ num = data->bpw_len / PCH_DMA_TRANS_SIZE + 1;
+ rem = data->bpw_len % PCH_DMA_TRANS_SIZE - head;
+ } else {
+ num = data->bpw_len / PCH_DMA_TRANS_SIZE;
+ rem = data->bpw_len % PCH_DMA_TRANS_SIZE +
+ PCH_DMA_TRANS_SIZE - head;
+ }
size = PCH_DMA_TRANS_SIZE;
- rem = 16;
} else {
num = 1;
size = data->bpw_len;
rem = data->bpw_len;
+ head = 0;
}

dma->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
@@ -1108,11 +1135,17 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
for (i = 0; i < num; i++, sg++) {
if (i == 0) {
sg->offset = 0;
+ sg_set_page(sg, virt_to_page(dma->tx_buf_virt), size + head,
+ sg->offset);
+ sg_dma_len(sg) = size + head;
+ } else if (i == (num - 1)) {
+ sg->offset = head + size * i;
+ sg->offset = sg->offset * (*bpw / 8);
sg_set_page(sg, virt_to_page(dma->tx_buf_virt), rem,
sg->offset);
sg_dma_len(sg) = rem;
} else {
- sg->offset = rem + size * (i - 1);
+ sg->offset = head + size * i;
sg->offset = sg->offset * (*bpw / 8);
sg_set_page(sg, virt_to_page(dma->tx_buf_virt), size,
sg->offset);
@@ -1200,6 +1233,7 @@ static void pch_spi_process_messages(struct work_struct *pwork)
data->current_msg->spi->bits_per_word);
pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL);
do {
+ int cnt;
/* If we are already processing a message get the next
transfer structure from the message otherwise retrieve
the 1st transfer request from the message. */
@@ -1219,11 +1253,20 @@ static void pch_spi_process_messages(struct work_struct *pwork)
}
spin_unlock(&data->lock);

+ if (!data->cur_trans->len)
+ goto out;
+ cnt = (data->cur_trans->len - 1) / PCH_BUF_SIZE + 1;
+ data->save_total_len = data->cur_trans->len;
if (data->use_dma) {
- pch_spi_handle_dma(data, &bpw);
- if (!pch_spi_start_transfer(data))
- goto out;
- pch_spi_copy_rx_data_for_dma(data, bpw);
+ int i;
+ char *save_rx_buf = data->cur_trans->rx_buf;
+ for (i = 0; i < cnt; i ++) {
+ pch_spi_handle_dma(data, &bpw);
+ if (!pch_spi_start_transfer(data))
+ goto out;
+ pch_spi_copy_rx_data_for_dma(data, bpw);
+ }
+ data->cur_trans->rx_buf = save_rx_buf;
} else {
pch_spi_set_tx(data, &bpw);
pch_spi_set_ir(data);
@@ -1234,6 +1277,7 @@ static void pch_spi_process_messages(struct work_struct *pwork)
data->pkt_tx_buff = NULL;
}
/* increment message count */
+ data->cur_trans->len = data->save_total_len;
data->current_msg->actual_length += data->cur_trans->len;

dev_dbg(&data->master->dev,
--
1.7.4.4


\
 
 \ /
  Last update: 2011-12-09 05:17    [from the cache]
©2003-2011 Jasper Spaans