lkml.org 
[lkml]   [2011]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] linux-next:et131x: Revert changes from previous commit
On 12/06/2011 03:23 PM, Mark Einon wrote:
> In commit 834d0ee317b (uintxy_t removal) not all changes were trival text replacements, some converted u64 -> dma_addr_t.
> In some configurations dma_addr_t is a u32, meaning that some bit operations cause build warnings. From Randy Dunlap:
>
> ----------------
> on i386 (X86_32) builds:
>
> drivers/staging/et131x/et131x.c:2483:8: warning: right shift count >= width of type
> drivers/staging/et131x/et131x.c:2531:8: warning: right shift count >= width of type
> ----------------
>
> Removed these by reverting dma_addr_t back to u64 types, as well as reverting some other non-trivial changes from the aforementioned commit.
>
> Reported-by: Randy Dunlap <rdunlap@xenotime.net>
> Signed-off-by: Mark Einon <mark.einon@gmail.com>

Acked-by: Randy Dunlap <rdunlap@xenotime.net>

Thanks.

> ---
> drivers/staging/et131x/et131x.c | 28 +++++++++++++---------------
> 1 files changed, 13 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
> index 7ae3e53..2c4069f 100644
> --- a/drivers/staging/et131x/et131x.c
> +++ b/drivers/staging/et131x/et131x.c
> @@ -299,8 +299,8 @@ struct fbr_lookup {
> dma_addr_t ring_physaddr;
> void *mem_virtaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS];
> dma_addr_t mem_physaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS];
> - dma_addr_t real_physaddr;
> - u32 offset;
> + u64 real_physaddr;
> + u64 offset;
> u32 local_full;
> u32 num_entries;
> u32 buffsize;
> @@ -1902,10 +1902,9 @@ static void et131x_config_rx_dma_regs(struct et131x_adapter *adapter)
> /* Set the address and parameters of Free buffer ring 1 (and 0 if
> * required) into the 1310's registers
> */
> - writel(((u64) rx_local->fbr[0]->real_physaddr) >> 32,
> + writel((u32) (rx_local->fbr[0]->real_physaddr >> 32),
> &rx_dma->fbr1_base_hi);
> - writel(((u64) rx_local->fbr[0]->real_physaddr) & DMA_BIT_MASK(32),
> - &rx_dma->fbr1_base_lo);
> + writel((u32) rx_local->fbr[0]->real_physaddr, &rx_dma->fbr1_base_lo);
> writel(rx_local->fbr[0]->num_entries - 1, &rx_dma->fbr1_num_des);
> writel(ET_DMA10_WRAP, &rx_dma->fbr1_full_offset);
>
> @@ -1927,10 +1926,9 @@ static void et131x_config_rx_dma_regs(struct et131x_adapter *adapter)
> fbr_entry++;
> }
>
> - writel(((u64) rx_local->fbr[1]->real_physaddr) >> 32,
> + writel((u32) (rx_local->fbr[1]->real_physaddr >> 32),
> &rx_dma->fbr0_base_hi);
> - writel(((u64) rx_local->fbr[1]->real_physaddr) & DMA_BIT_MASK(32),
> - &rx_dma->fbr0_base_lo);
> + writel((u32) rx_local->fbr[1]->real_physaddr, &rx_dma->fbr0_base_lo);
> writel(rx_local->fbr[1]->num_entries - 1, &rx_dma->fbr0_num_des);
> writel(ET_DMA10_WRAP, &rx_dma->fbr0_full_offset);
>
> @@ -2275,10 +2273,10 @@ static inline u32 bump_free_buff_ring(u32 *free_buff_ring, u32 limit)
> * @mask: correct mask
> */
> static void et131x_align_allocated_memory(struct et131x_adapter *adapter,
> - dma_addr_t *phys_addr, u32 *offset,
> - u32 mask)
> + u64 *phys_addr, u64 *offset,
> + u64 mask)
> {
> - dma_addr_t new_addr = *phys_addr & ~mask;
> + u64 new_addr = *phys_addr & ~mask;
>
> *offset = 0;
>
> @@ -2430,8 +2428,8 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
> rx_ring->fbr[1]->offset);
> #endif
> for (i = 0; i < (rx_ring->fbr[0]->num_entries / FBR_CHUNKS); i++) {
> - dma_addr_t fbr1_tmp_physaddr;
> - u32 fbr1_offset;
> + u64 fbr1_tmp_physaddr;
> + u64 fbr1_offset;
> u32 fbr1_align;
>
> /* This code allocates an area of memory big enough for N
> @@ -2496,8 +2494,8 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
> #ifdef USE_FBR0
> /* Same for FBR0 (if in use) */
> for (i = 0; i < (rx_ring->fbr[1]->num_entries / FBR_CHUNKS); i++) {
> - dma_addr_t fbr0_tmp_physaddr;
> - u32 fbr0_offset;
> + u64 fbr0_tmp_physaddr;
> + u64 fbr0_offset;
>
> fbr_chunksize =
> ((FBR_CHUNKS + 1) * rx_ring->fbr[1]->buffsize) - 1;


--
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***


\
 
 \ /
  Last update: 2011-12-07 19:01    [W:0.200 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site