lkml.org 
[lkml]   [2011]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] drivers, char: add U-Boot bootcount driver
Hello Wolfram,

Wolfram Sang wrote:
> On Sun, Dec 04, 2011 at 10:45:21AM +0100, Heiko Schocher wrote:
>> This driver implements the Linux kernel half of the boot count feature -
>> the boot counter can only be reset after it is clear that the
>> application has been started and is running correctly, which usually
>> can only be determined by the application code itself. Thus the reset
>> of the boot counter must be done by application code, which thus needs
>> an appropriate driver.
>
> An appropriate mechanism, not necessarily a driver, see below.
>
>> Required feature by the Carrier Grade Linux Requirements Definition;
>> see for example document "Carrier Grade Linux Requirements Definition
>> Overview V3.0" at
>>
>> http://www.linuxfoundation.org/collaborate/workgroups/cgl/requirements#SMM.6.0_Boot_Cycle_Detection
>>
>> Description: OSDL CGL specifies that carrier grade Linux
>> shall provide support for detecting a repeating reboot cycle
>> due to recurring failures. This detection should happen in
>> user space before system services are started.
>
> So, technically, a flag would be enough, not necessarily a counter? Although a
> counter probably has more advantages...
>
>> This driver provides read/write access to the U-Boot bootcounter
>> through PROC FS and/or sysFS file.
>
> Why ProcFS? Why ProcFS and/or SysFS? Which has priority? Why not /dev?

I drop the ProcFS support for v2.

>> The bootcountregister gets configured via DTS.
>> for example on the enbw_cmc board:
>>
>> bootcount@0x23060 {
>> compatible = "uboot,bootcount";
>
> No. I assume you are not the vendor of what is at 0x23060, the actual device.
> Only the device must be encoded in the compatible-entry which then implies the
> bootcount functionality. Also, keep in mind that your solution should be
> generic for bootloaders.

So I should call it compatible = "generic, bootcount" ?

>> reg = <0x23060 0x20>;
>
> I assume that non-volatile memory would qualify as a boot-counter, so those
> could be tied to I2C busses etc? reg would not fit then.

Currently, mem only supported, add this to the Documentation and log
message.

> I do wonder if it makes more sense to add such functionality to the
> watchdog-core to save the additional device (CCed). Needs a second thought,
> though...

Thanks!

bye,
heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


\
 
 \ /
  Last update: 2011-12-05 15:53    [W:0.079 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site