Messages in this thread | | | Date | Mon, 5 Dec 2011 13:22:57 +0000 | Subject | PCTV452e unable to tune in Kernel 3.2 RC3 / RC4 | From | Neil Sutton <> |
| |
Hi all,
I'm trying to make my TT S2-3600 work with Kernel 3.2 - Tried RC3 and RC4 - (I believe it now supports this adapter via PCTV452e) So, I enabled the PCTV452e module in the kernel config and the device detects ok;
[ 12.075239] dvb-usb: found a 'Technotrend TT Connect S2-3600' in warm state. [ 12.076620] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 12.080767] dvb-usb: MAC address: 00:d0:5c:64:54:95 [ 13.298383] dvb-usb: Technotrend TT Connect S2-3600 successfully initialized and connected.
But when I try to make any tuning with the device I get no picture and the following get put to syslog;
Dec 2 01:01:26 MicroServer kernel: [ 1535.331468] dvb-usb: could not submit URB no. 0 - get them all back Dec 2 01:01:26 MicroServer kernel: [ 1535.372388] pctv452e: I2C error -121; AA 97 CC 00 01 -> 55 97 CC 00 00. Dec 2 01:01:26 MicroServer kernel: [ 1535.385003] pctv452e: I2C error -121; AA AE CC 00 01 -> 55 AE CC 00 00. Dec 2 01:01:26 MicroServer kernel: [ 1535.444992] pctv452e: I2C error -121; AA C9 CC 00 01 -> 55 C9 CC 00 00.
The 'URB' errors appear each time the card moves to a new transponder, the I2C errors appear to be when the card is attempting to lock a channel within the current transponder.
Does anyone have any thoughts on what might be causing this ? - I've had a search around but can't really find the problem mentioned anywhere... the device works fine under the latest liplianin drivers.
I posted this a few days back at the linuxdvb list, but I'm not entirely sure where this falls, so apologies if this is not the correct place to report this!
Many Thanks Neil
| |