lkml.org 
[lkml]   [2011]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/3] mtd/nand : use elbc_fcm_ctrl->oob to set FPAR_MS bit of FPAR
From
Date
On Sun, 2011-12-04 at 12:31 +0800, shuo.liu@freescale.com wrote:
> From: Liu Shuo <b35362@freescale.com>
>
> On both of large-page chip and small-page chip, we always should use
> 'elbc_fcm_ctrl->oob' to set the FPAR_LP_MS/FPAR_SP_MS bit of FPAR, don't
> use a overflowed 'column' to set it.
>
> Signed-off-by: Liu Shuo <b35362@freescale.com>
> Signed-off-by: Li Yang <leoli@freescale.com>

Pushed patches 1 and 2 to l2-mtd-2.6.git, thanks!

Artem.



\
 
 \ /
  Last update: 2011-12-05 07:53    [W:0.145 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site