lkml.org 
[lkml]   [2011]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RESEND 0/8] serial: 8250: support hw-based RS485 direction control
Il 09/12/2011 18:07, Wolfram Sang ha scritto:
> Some 8250-variants control the direction pin for RS485 in hardware. Linux has
> RS485 support these days, so update the 8250-driver to adhere to that.
>
> Code is based on 3.2-rc4, tested on a OMAP-based custom board with a 16V2750.
> A git tree can be found here:
>
> git://git.pengutronix.de/git/wsa/linux-2.6.git 8250_rs485
>
> There is no code change since the initial post of this series. I updated some
> of the patch descriptions, though. A kind-of-ack from Claudio can be found here
> [1]. Please consider for inclusion.


Hi Wolfram,

since the code has not been changed, my opinion remains that it is fine
and it should enter mainline.

Best regards,

Claudio


\
 
 \ /
  Last update: 2011-12-12 15:45    [W:0.766 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site