lkml.org 
[lkml]   [2011]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: CIFS mount: 3.2.0-rc3 suspend crash
On 12/02/2011 12:29 AM, Jeff Layton wrote:

> On Thu, 01 Dec 2011 23:47:01 +0530
> "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> wrote:
>
>> On 12/01/2011 11:00 PM, Srivatsa S. Bhat wrote:
>>
>>> On 12/01/2011 10:41 PM, Srivatsa S. Bhat wrote:
>>>
>>>> On 12/01/2011 05:03 PM, Jeff Layton wrote:
>>>>
>>>>> On Wed, 30 Nov 2011 17:34:35 -0500
>>>>> Woody Suwalski <terraluna977@gmail.com> wrote:
>>>>>
>>>>>> Jeff Layton wrote:
>>>>>>> On Wed, 30 Nov 2011 11:03:59 +0530
>>>>>>> "Srivatsa S. Bhat"<srivatsa.bhat@linux.vnet.ibm.com> wrote:
>>>>>>>
>>>>>>>> Adding linux-pm, Jeff Layton and others to CC.
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>> Srivatsa S. Bhat
>>>>>>>>
>>>>>>>> On 11/30/2011 05:04 AM, Woody Suwalski wrote:
>>>>>>>>
>>>>>>>>> With CIFS mount present, suspend2ram seems to be failing on 3.2.0-rc3.
>>>>>>>>> It may be similar to recent NFS suspend issues?
>>>>>>>>>
>>>>>>>>> I have done couple of suspends, then did mount.cifs (at 555 seconds),
>>>>>>>>> and then tried suspend again. The problem is easy to duplicate.
>>>>>>>>>
>>>>>>>>> The hardware is a netbook Asus EeePC.
>>>>>>>>> I guess will find out if:
>>>>>>>>> - cifs for real 3.2 fixes the problem
>>>>>>>>> - NFS fix for -rc4 work for CIFS as well...
>>>>>>>>>
>>>>>>>>> Thanks, Woody
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> [ 153.974532] uhci_hcd 0000:00:1d.1: PCI INT B disabled
>>>>>>>>> [ 153.974578] uhci_hcd 0000:00:1d.0: PCI INT A disabled
>>>>>>>>> [ 153.975774] i915 0000:00:02.0: PCI INT A disabled
>>>>>>>>> [ 153.977210] ACPI handle has no context!
>>>>>>>>> [ 153.977302] atl2 0000:03:00.0: PCI INT A disabled
>>>>>>>>> [ 153.977316] ACPI handle has no context!
>>>>>>>>> [ 154.277181] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
>>>>>>>>> [ 154.288119] PM: suspend of devices complete after 414.210 msecs
>>>>>>>>> [ 154.299212] ehci_hcd 0000:00:1d.7: PME# enabled
>>>>>>>>> [ 154.299257] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>>>>>>>>> [ 154.310114] uhci_hcd 0000:00:1d.3: wake-up capability enabled by ACPI
>>>>>>>>> [ 154.310178] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>>>>>>>>> [ 154.310235] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>>>>>>>>> [ 154.310293] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>>>>>>>>> [ 154.310418] PM: late suspend of devices complete after 22.283 msecs
>>>>>>>>> [ 154.310451] ACPI: Preparing to enter system sleep state S3
>>>>>>>>> [ 154.311671] PM: Saving platform NVS memory
>>>>>>>>> [ 154.312968] Disabling non-boot CPUs ...
>>>>>>>>> [ 154.312968] ACPI: Low-level resume complete
>>>>>>>>> [ 154.312968] PM: Restoring platform NVS memory
>>>>>>>>> [ 154.312968] Force enabled HPET at resume
>>>>>>>>> [ 154.313366] ACPI: Waking up from system sleep state S3
>>>>>>>>> [ 154.341485] snd_hda_intel 0000:00:1b.0: restoring config space at
>>>>>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>>>>>> [ 154.341550] pcieport 0000:00:1c.0: restoring config space at offset
>>>>>>>>> 0x9 (was 0x1fff1, writing 0x10511041)
>>>>>>>>> [ 154.341566] pcieport 0000:00:1c.0: restoring config space at offset
>>>>>>>>> 0x8 (was 0xfff0, writing 0x10301020)
>>>>>>>>> [ 154.341580] pcieport 0000:00:1c.0: restoring config space at offset
>>>>>>>>> 0x7 (was 0xf0, writing 0x3030)
>>>>>>>>> [ 154.341603] pcieport 0000:00:1c.0: restoring config space at offset
>>>>>>>>> 0x1 (was 0x100104, writing 0x100507)
>>>>>>>>> [ 154.341689] pcieport 0000:00:1c.1: restoring config space at offset
>>>>>>>>> 0x9 (was 0x1fff1, writing 0x10111001)
>>>>>>>>> [ 154.341705] pcieport 0000:00:1c.1: restoring config space at offset
>>>>>>>>> 0x7 (was 0xf0, writing 0x2020)
>>>>>>>>> [ 154.341728] pcieport 0000:00:1c.1: restoring config space at offset
>>>>>>>>> 0x1 (was 0x100106, writing 0x100507)
>>>>>>>>> [ 154.341812] pcieport 0000:00:1c.2: restoring config space at offset
>>>>>>>>> 0x7 (was 0xf0, writing 0x1010)
>>>>>>>>> [ 154.341834] pcieport 0000:00:1c.2: restoring config space at offset
>>>>>>>>> 0x1 (was 0x100106, writing 0x100507)
>>>>>>>>> [ 154.341920] uhci_hcd 0000:00:1d.0: restoring config space at offset
>>>>>>>>> 0x1 (was 0x2800005, writing 0x2800001)
>>>>>>>>> [ 154.341958] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>>>>>>>>> [ 154.342004] uhci_hcd 0000:00:1d.1: restoring config space at offset
>>>>>>>>> 0x1 (was 0x2800005, writing 0x2800001)
>>>>>>>>> [ 154.342086] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>>>>>>>>> [ 154.342137] uhci_hcd 0000:00:1d.2: restoring config space at offset
>>>>>>>>> 0x1 (was 0x2800005, writing 0x2800001)
>>>>>>>>> [ 154.342166] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>>>>>>>>> [ 154.342211] uhci_hcd 0000:00:1d.3: restoring config space at offset
>>>>>>>>> 0x1 (was 0x2800005, writing 0x2800001)
>>>>>>>>> [ 154.342239] uhci_hcd 0000:00:1d.3: wake-up capability disabled by ACPI
>>>>>>>>> [ 154.342296] ehci_hcd 0000:00:1d.7: restoring config space at offset
>>>>>>>>> 0x1 (was 0x2900006, writing 0x2900002)
>>>>>>>>> [ 154.342335] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>>>>>>>>> [ 154.342349] ehci_hcd 0000:00:1d.7: PME# disabled
>>>>>>>>> [ 154.342374] pci 0000:00:1e.0: restoring config space at offset 0xf
>>>>>>>>> (was 0x60000, writing 0x600ff)
>>>>>>>>> [ 154.342606] atl2 0000:03:00.0: restoring config space at offset 0x1
>>>>>>>>> (was 0x100006, writing 0x100406)
>>>>>>>>> [ 154.343209] PM: early resume of devices complete after 1.941 msecs
>>>>>>>>> [ 154.343454] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) ->
>>>>>>>>> IRQ 16
>>>>>>>>> [ 154.343470] i915 0000:00:02.0: setting latency timer to 64
>>>>>>>>> [ 154.347098] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level,
>>>>>>>>> low) -> IRQ 16
>>>>>>>>> [ 154.347117] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
>>>>>>>>> [ 154.347218] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>>>>>>>>> [ 154.347424] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
>>>>>>>>> -> IRQ 23
>>>>>>>>> [ 154.347442] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>>>>>>>>> [ 154.347479] usb usb2: root hub lost power or was reset
>>>>>>>>> [ 154.347543] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
>>>>>>>>> -> IRQ 19
>>>>>>>>> [ 154.347559] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>>>>>>>>> [ 154.347593] usb usb3: root hub lost power or was reset
>>>>>>>>> [ 154.347653] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
>>>>>>>>> -> IRQ 18
>>>>>>>>> [ 154.347670] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>>>>>>>>> [ 154.347702] usb usb4: root hub lost power or was reset
>>>>>>>>> [ 154.347760] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low)
>>>>>>>>> -> IRQ 16
>>>>>>>>> [ 154.347776] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>>>>>>>>> [ 154.347808] usb usb5: root hub lost power or was reset
>>>>>>>>> [ 154.347867] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
>>>>>>>>> -> IRQ 23
>>>>>>>>> [ 154.347884] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>>>>>>>>> [ 154.347988] pci 0000:00:1e.0: setting latency timer to 64
>>>>>>>>> [ 154.348125] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low)
>>>>>>>>> -> IRQ 19
>>>>>>>>> [ 154.348140] ata_piix 0000:00:1f.2: setting latency timer to 64
>>>>>>>>> [ 154.354172] atl2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) ->
>>>>>>>>> IRQ 17
>>>>>>>>> [ 154.354192] atl2 0000:03:00.0: setting latency timer to 64
>>>>>>>>> [ 154.354309] atl2 0000:03:00.0: irq 44 for MSI/MSI-X
>>>>>>>>> [ 154.354722] sd 1:0:0:0: [sda] Starting disk
>>>>>>>>> [ 154.525453] ata2.00: ACPI cmd ef/03:44:00:00:00:a0 (SET FEATURES)
>>>>>>>>> filtered out
>>>>>>>>> [ 154.525470] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES)
>>>>>>>>> filtered out
>>>>>>>>> [ 154.531325] ata2.00: configured for UDMA/66
>>>>>>>>> [ 154.591089] usb 1-5: reset high-speed USB device number 2 using ehci_hcd
>>>>>>>>> [ 154.805066] PM: resume of devices complete after 461.739 msecs
>>>>>>>>> [ 154.805801] Restarting tasks ... done.
>>>>>>>>> [ 154.832376] video LNXVIDEO:00: Restoring backlight state
>>>>>>>>> [ 155.964388] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
>>>>>>>>> [ 265.377852] PM: Syncing filesystems ... done.
>>>>>>>>> [ 265.427397] Freezing user space processes ... (elapsed 0.01 seconds)
>>>>>>>>> done.
>>>>>>>>> [ 265.438118] Freezing remaining freezable tasks ... (elapsed 0.01
>>>>>>>>> seconds) done.
>>>>>>>>> [ 265.449211] Suspending console(s) (use no_console_suspend to debug)
>>>>>>>>> [ 265.451744] sd 1:0:0:0: [sda] Stopping disk
>>>>>>>>> [ 265.555169] ata_piix 0000:00:1f.2: PCI INT B disabled
>>>>>>>>> [ 265.555281] ehci_hcd 0000:00:1d.7: PCI INT A disabled
>>>>>>>>> [ 265.555336] uhci_hcd 0000:00:1d.3: PCI INT D disabled
>>>>>>>>> [ 265.555384] uhci_hcd 0000:00:1d.2: PCI INT C disabled
>>>>>>>>> [ 265.555432] uhci_hcd 0000:00:1d.1: PCI INT B disabled
>>>>>>>>> [ 265.555479] uhci_hcd 0000:00:1d.0: PCI INT A disabled
>>>>>>>>> [ 265.555639] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
>>>>>>>>> [ 265.556302] i915 0000:00:02.0: PCI INT A disabled
>>>>>>>>> [ 265.558207] ACPI handle has no context!
>>>>>>>>> [ 265.558302] atl2 0000:03:00.0: PCI INT A disabled
>>>>>>>>> [ 265.558316] ACPI handle has no context!
>>>>>>>>> [ 265.569117] PM: suspend of devices complete after 119.214 msecs
>>>>>>>>> [ 265.580216] ehci_hcd 0000:00:1d.7: PME# enabled
>>>>>>>>> [ 265.580261] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>>>>>>>>> [ 265.591121] uhci_hcd 0000:00:1d.3: wake-up capability enabled by ACPI
>>>>>>>>> [ 265.591186] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>>>>>>>>> [ 265.591244] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>>>>>>>>> [ 265.591302] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>>>>>>>>> [ 265.591581] PM: late suspend of devices complete after 22.446 msecs
>>>>>>>>> [ 265.591615] ACPI: Preparing to enter system sleep state S3
>>>>>>>>> [ 265.592832] PM: Saving platform NVS memory
>>>>>>>>> [ 265.594133] Disabling non-boot CPUs ...
>>>>>>>>> [ 265.594133] ACPI: Low-level resume complete
>>>>>>>>> [ 265.594133] PM: Restoring platform NVS memory
>>>>>>>>> [ 265.594133] Force enabled HPET at resume
>>>>>>>>> [ 265.594133] ACPI: Waking up from system sleep state S3
>>>>>>>>> [ 265.621463] snd_hda_intel 0000:00:1b.0: restoring config space at
>>>>>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>>>>>> [ 265.621528] pcieport 0000:00:1c.0: restoring config space at offset
>>>>>>>>> 0x9 (was 0x1fff1, writing 0x10511041)
>>>>>>>>> [ 265.621544] pcieport 0000:00:1c.0: restoring config space at offset
>>>>>>>>> 0x8 (was 0xfff0, writing 0x10301020)
>>>>>>>>> [ 265.621559] pcieport 0000:00:1c.0: restoring config space at offset
>>>>>>>>> 0x7 (was 0xf0, writing 0x3030)
>>>>>>>>> [ 265.621582] pcieport 0000:00:1c.0: restoring config space at offset
>>>>>>>>> 0x1 (was 0x100104, writing 0x100507)
>>>>>>>>> [ 265.621667] pcieport 0000:00:1c.1: restoring config space at offset
>>>>>>>>> 0x9 (was 0x1fff1, writing 0x10111001)
>>>>>>>>> [ 265.621684] pcieport 0000:00:1c.1: restoring config space at offset
>>>>>>>>> 0x7 (was 0xf0, writing 0x2020)
>>>>>>>>> [ 265.621706] pcieport 0000:00:1c.1: restoring config space at offset
>>>>>>>>> 0x1 (was 0x100106, writing 0x100507)
>>>>>>>>> [ 265.621791] pcieport 0000:00:1c.2: restoring config space at offset
>>>>>>>>> 0x7 (was 0xf0, writing 0x1010)
>>>>>>>>> [ 265.621813] pcieport 0000:00:1c.2: restoring config space at offset
>>>>>>>>> 0x1 (was 0x100106, writing 0x100507)
>>>>>>>>> [ 265.621899] uhci_hcd 0000:00:1d.0: restoring config space at offset
>>>>>>>>> 0x1 (was 0x2800005, writing 0x2800001)
>>>>>>>>> [ 265.621938] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>>>>>>>>> [ 265.621983] uhci_hcd 0000:00:1d.1: restoring config space at offset
>>>>>>>>> 0x1 (was 0x2800005, writing 0x2800001)
>>>>>>>>> [ 265.622057] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>>>>>>>>> [ 265.622111] uhci_hcd 0000:00:1d.2: restoring config space at offset
>>>>>>>>> 0x1 (was 0x2800005, writing 0x2800001)
>>>>>>>>> [ 265.622139] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>>>>>>>>> [ 265.622183] uhci_hcd 0000:00:1d.3: restoring config space at offset
>>>>>>>>> 0x1 (was 0x2800005, writing 0x2800001)
>>>>>>>>> [ 265.622210] uhci_hcd 0000:00:1d.3: wake-up capability disabled by ACPI
>>>>>>>>> [ 265.622267] ehci_hcd 0000:00:1d.7: restoring config space at offset
>>>>>>>>> 0x1 (was 0x2900006, writing 0x2900002)
>>>>>>>>> [ 265.622305] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>>>>>>>>> [ 265.622320] ehci_hcd 0000:00:1d.7: PME# disabled
>>>>>>>>> [ 265.622344] pci 0000:00:1e.0: restoring config space at offset 0xf
>>>>>>>>> (was 0x60000, writing 0x600ff)
>>>>>>>>> [ 265.622575] atl2 0000:03:00.0: restoring config space at offset 0x1
>>>>>>>>> (was 0x100006, writing 0x100406)
>>>>>>>>> [ 265.623172] PM: early resume of devices complete after 1.925 msecs
>>>>>>>>> [ 265.623416] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) ->
>>>>>>>>> IRQ 16
>>>>>>>>> [ 265.623432] i915 0000:00:02.0: setting latency timer to 64
>>>>>>>>> [ 265.627096] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level,
>>>>>>>>> low) -> IRQ 16
>>>>>>>>> [ 265.627115] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
>>>>>>>>> [ 265.627215] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>>>>>>>>> [ 265.627429] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
>>>>>>>>> -> IRQ 23
>>>>>>>>> [ 265.627448] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>>>>>>>>> [ 265.627485] usb usb2: root hub lost power or was reset
>>>>>>>>> [ 265.627548] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
>>>>>>>>> -> IRQ 19
>>>>>>>>> [ 265.627564] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>>>>>>>>> [ 265.627597] usb usb3: root hub lost power or was reset
>>>>>>>>> [ 265.627659] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
>>>>>>>>> -> IRQ 18
>>>>>>>>> [ 265.627675] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>>>>>>>>> [ 265.627707] usb usb4: root hub lost power or was reset
>>>>>>>>> [ 265.627766] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low)
>>>>>>>>> -> IRQ 16
>>>>>>>>> [ 265.627781] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>>>>>>>>> [ 265.627814] usb usb5: root hub lost power or was reset
>>>>>>>>> [ 265.627873] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
>>>>>>>>> -> IRQ 23
>>>>>>>>> [ 265.627889] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>>>>>>>>> [ 265.627993] pci 0000:00:1e.0: setting latency timer to 64
>>>>>>>>> [ 265.628130] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low)
>>>>>>>>> -> IRQ 19
>>>>>>>>> [ 265.628145] ata_piix 0000:00:1f.2: setting latency timer to 64
>>>>>>>>> [ 265.634153] atl2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) ->
>>>>>>>>> IRQ 17
>>>>>>>>> [ 265.634173] atl2 0000:03:00.0: setting latency timer to 64
>>>>>>>>> [ 265.634290] atl2 0000:03:00.0: irq 44 for MSI/MSI-X
>>>>>>>>> [ 265.634712] sd 1:0:0:0: [sda] Starting disk
>>>>>>>>> [ 265.796709] ata2.00: ACPI cmd ef/03:44:00:00:00:a0 (SET FEATURES)
>>>>>>>>> filtered out
>>>>>>>>> [ 265.796726] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES)
>>>>>>>>> filtered out
>>>>>>>>> [ 265.803326] ata2.00: configured for UDMA/66
>>>>>>>>> [ 265.880091] usb 1-5: reset high-speed USB device number 2 using ehci_hcd
>>>>>>>>> [ 266.091960] PM: resume of devices complete after 468.673 msecs
>>>>>>>>> [ 266.092731] Restarting tasks ... done.
>>>>>>>>> [ 266.112098] video LNXVIDEO:00: Restoring backlight state
>>>>>>>>> [ 267.219459] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
>>>>>>>>> [ 554.912659] FS-Cache: Loaded
>>>>>>>>> [ 554.950749] FS-Cache: Netfs 'cifs' registered for caching
>>>>>>>>> [ 555.047550] CIFS VFS: default security mechanism requested. The
>>>>>>>>> default security mechanism will be upgraded from ntlm to ntlmv2 in
>>>>>>>>> kernel release 3.2
>>>>>>>>> [ 2094.090461] PM: Syncing filesystems ... done.
>>>>>>>>> [ 2094.155385] Freezing user space processes ... (elapsed 0.01 seconds)
>>>>>>>>> done.
>>>>>>>>> [ 2094.166113] Freezing remaining freezable tasks ...
>>>>>>>>> [ 2114.175108] Freezing of tasks failed after 20.00 seconds (1 tasks
>>>>>>>>> refusing to freeze, wq_busy=0):
>>>>>>>>> [ 2114.175586] cifsd S ccb50b40 0 2219 2 0x00800000
>>>>>>>>> [ 2114.175611] cc6cc000 00000046 00000000 ccb50b40 cc776b40 cc41d000
>>>>>>>>> cc776780 cc61d960
>>>>>>>>> [ 2114.175635] cc4d81c0 c178ec40 c178ec40 ccb50980 00000000 ccb50980
>>>>>>>>> c1031e88 00000001
>>>>>>>>> [ 2114.175660] c1031f9f c10230f5 c1559ee1 c17a7140 c1031e88 00000001
>>>>>>>>> c1031f9f c10230f5
>>>>>>>>> [ 2114.175684] Call Trace:
>>>>>>>>> [ 2114.175710] [<c1031e88>] ? get_parent_ip+0x8/0x20
>>>>>>>>> [ 2114.175723] [<c1031f9f>] ? add_preempt_count+0x5f/0xa0
>>>>>>>>> [ 2114.175747] [<c10230f5>] ? default_spin_lock_flags+0x5/0x10
>>>>>>>>> [ 2114.175770] [<c1559ee1>] ? _raw_spin_lock_irqsave+0x31/0x50
>>>>>>>>> [ 2114.175782] [<c1031e88>] ? get_parent_ip+0x8/0x20
>>>>>>>>> [ 2114.175794] [<c1031f9f>] ? add_preempt_count+0x5f/0xa0
>>>>>>>>> [ 2114.175807] [<c10230f5>] ? default_spin_lock_flags+0x5/0x10
>>>>>>>>> [ 2114.175820] [<c1559ee1>] ? _raw_spin_lock_irqsave+0x31/0x50
>>>>>>>>> [ 2114.175832] [<c1031e88>] ? get_parent_ip+0x8/0x20
>>>>>>>>> [ 2114.175846] [<c15588c1>] ? schedule_timeout+0x111/0x1d0
>>>>>>>>> [ 2114.175860] [<c1512500>] ? tcp_rcv_established+0x170/0x760
>>>>>>>>> [ 2114.175878] [<c1041fa0>] ? usleep_range+0x40/0x40
>>>>>>>>> [ 2114.175897] [<c14cb6e7>] ? sk_wait_data+0xa7/0xb0
>>>>>>>>> [ 2114.175920] [<c104ffc0>] ? abort_exclusive_wait+0x90/0x90
>>>>>>>>> [ 2114.175943] [<c1509948>] ? tcp_recvmsg+0x588/0xb80
>>>>>>>>> [ 2114.175956] [<c1001c0a>] ? __switch_to+0xea/0x1d0
>>>>>>>>> [ 2114.175976] [<c1008e97>] ? native_sched_clock+0x27/0x90
>>>>>>>>> [ 2114.175993] [<c152685f>] ? inet_recvmsg+0x6f/0xb0
>>>>>>>>> [ 2114.176063] [<c14c7f70>] ? sock_recvmsg+0xe0/0x120
>>>>>>>>> [ 2114.176086] [<c1242df8>] ? timerqueue_add+0x58/0xb0
>>>>>>>>> [ 2114.176098] [<c1031e88>] ? get_parent_ip+0x8/0x20
>>>>>>>>> [ 2114.176112] [<c1031e88>] ? get_parent_ip+0x8/0x20
>>>>>>>>> [ 2114.176123] [<c1031f07>] ? sub_preempt_count+0x67/0xa0
>>>>>>>>> [ 2114.176145] [<c1559d1b>] ? _raw_spin_unlock_irqrestore+0x1b/0x40
>>>>>>>>> [ 2114.176165] [<c1053a43>] ? hrtimer_try_to_cancel+0x43/0xa0
>>>>>>>>> [ 2114.176178] [<c1053ab1>] ? hrtimer_cancel+0x11/0x20
>>>>>>>>> [ 2114.176191] [<c155934c>] ? schedule_hrtimeout_range_clock+0xcc/0x170
>>>>>>>>> [ 2114.176206] [<c10536c0>] ? update_rmtp+0x80/0x80
>>>>>>>>> [ 2114.176219] [<c14c7fe7>] ? kernel_recvmsg+0x37/0x50
>>>>>>>>> [ 2114.176268] [<d0611228>] ? cifs_readv_from_socket+0x148/0x2b0 [cifs]
>>>>>>>>> [ 2114.176283] [<c1031e88>] ? get_parent_ip+0x8/0x20
>>>>>>>>> [ 2114.176309] [<d06113ac>] ? cifs_read_from_socket+0x1c/0x20 [cifs]
>>>>>>>>> [ 2114.176333] [<d0611522>] ? cifs_demultiplex_thread+0x112/0xc20 [cifs]
>>>>>>>>> [ 2114.176348] [<c1031e88>] ? get_parent_ip+0x8/0x20
>>>>>>>>> [ 2114.176370] [<d0611410>] ? dequeue_mid+0x60/0x60 [cifs]
>>>>>>>>> [ 2114.176391] [<c104f9c9>] ? kthread+0x69/0x70
>>>>>>>>> [ 2114.176406] [<c104f960>] ? kthread_worker_fn+0x150/0x150
>>>>>>>>> [ 2114.176420] [<c155af76>] ? kernel_thread_helper+0x6/0xd
>>>>>>>>> [ 2114.176466]
>>>>>>>>> [ 2114.176473] Restarting tasks ... done.
>>>>>>>>> [ 2114.201577] video LNXVIDEO:00: Restoring backlight state
>>>>>>>>> [ 2114.210975] lxpanel[1452]: segfault at 0 ip b6ead703 sp bfea8924
>>>>>>>>> error 4 in libc-2.13.so[b6e39000+13e000]
>>>>>>>>> --
>>>>>>> Thanks for reporting this. Does the following patch fix it?
>>>>>>>
>>>>>>> -----------------------[snip]------------------------
>>>>>>>
>>>>>>> cifs: attempt to freeze while looping on a receive attempt
>>>>>>>
>>>>>>> In the recent overhaul of the demultiplex thread receive path, we
>>>>>>> neglected to ensure that we attempt to freeze on each pass through the
>>>>>>> loop.
>>>>>>>
>>>>>>> Reported-by: Woody Suwalski<terraluna977@gmail.com>
>>>>>>> Signed-off-by: Jeff Layton<jlayton@redhat.com>
>>>>>>> ---
>>>>>>> fs/cifs/connect.c | 2 ++
>>>>>>> 1 files changed, 2 insertions(+), 0 deletions(-)
>>>>>>>
>>>>>>> diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
>>>>>>> index bf82f88..d166e3a 100644
>>>>>>> --- a/fs/cifs/connect.c
>>>>>>> +++ b/fs/cifs/connect.c
>>>>>>> @@ -441,6 +441,8 @@ cifs_readv_from_socket(struct TCP_Server_Info *server, struct kvec *iov_orig,
>>>>>>> smb_msg.msg_controllen = 0;
>>>>>>>
>>>>>>> for (total_read = 0; to_read; total_read += length, to_read -= length) {
>>>>>>> + try_to_freeze();
>>>>>>> +
>>>>>>> if (server_unresponsive(server)) {
>>>>>>> total_read = -EAGAIN;
>>>>>>> break;
>>>>>> Jeff, I have tested on a similar EeePC box - the same cifsd crash.
>>>>>> The patch did not help...
>>>>>>
>>>>>> Woody
>>>>>>
>>>>>
>>>>> Well, that is odd then...
>>>>>
>>>>> First, we should clarify here: This is not a crash. The above stack
>>>>> trace is just telling us that the freezer wasn't able to freeze the
>>>>> cifs kthread that handles the receive codepath. It's possible that the
>>>>> userspace code wasn't able to deal with that and you had to reboot your
>>>>> machine after this, but that's really a separate problem if so.
>>>>>
>>>>> cifsd does blocking receives. When it creates a socket, it does this:
>>>>>
>>>>> socket->sk->sk_rcvtimeo = 7 * HZ;
>>>>>
>>>>> ...so the maximum amount of time that this code ought to sit in
>>>>> kernel_recvmsg is ~7s. If kernel_recvmsg returns certain error codes
>>>>> (like -EAGAIN), it'll sleep for another second or two before going
>>>>> around the loop again. So the max time that a loop iteration takes
>>>>> should always be less than ~10s.
>>>>>
>>>>> With the above patch, cifsd will try_to_freeze() on each pass through
>>>>> the loop. If that didn't fix the problem, and you got the same stack
>>>>> trace, then that suggests that the time being spent in kernel_recvmsg
>>>>> is more than 20s. Perhaps this is due to some lower-level networking
>>>>> problem?
>>>>>
>>>>
>>>>
>>>> Hey, looking at the error logs again, I see that cifsd is in "S" state,
>>>> meaning it is sleeping in TASK_INTERRUPTIBLE state. And, in fs/cifs/connect.c,
>>>> in cifs_demultiplex_thread() function, I see set_freezable(), which is
>>>> more than enough to allow the freezer to freeze this kernel thread if it
>>>> is sleeping interruptibly.
>>>> In other words, we should not be getting freezing failures here at all!
>>>>
>>>> Not sure what could be going wrong here...
>>>>
>>>
>>>
>>> Sorry, interruptible sleep + set_freezable() only ensures that the freezer
>>> can wake the kernel thread from sleep. Calling try_to_freeze() after waking
>>> up is still the kernel thread's job, and without doing that soon enough the
>>> kernel thread won't get frozen and freezing failures will occur.
>>>
>>> So Jeff's patch should have solved the issue IMO, but ...
>>>
>>
>>
>> I see usleep_range() in the call stack. And that sleeps uninterruptibly (though
>> usually it is used to sleep for small intervals)..
>>
>
> I'm not sure how much we can trust that stack trace. It's hard to see
> what's actually happening there. Maybe it's worth turning on
> CONFIG_FRAME_POINTER?
>
> FWIW, There is a call to usleep_range in cifs_readv_from_socket:
>
> usleep_range(1000, 2000);
>
> ...which should only sleep for 1-2ms though.


Yeah, I saw that. The addition of try_to_freeze() after kernel_recvmsg() must
take care of that too, since a fresh 1-2ms sleep (i.e., after a try_to_freeze)
definitely wont hurt the freezer. However I saw a number of usleep_range()
calls in the networking code, so I felt the problem could really be in
kernel_recvmsg and hence added the try_to_freeze() immediately after it.
But again, its not much more than a guess.

> A pass through the
> entire loop shouldn't take more than 8s or so.
>
>> To see if we can solve this issue without touching the networking code, I have
>> written the patch below. Woody, could you please give it a shot?
>> If it does fix your issue, I'll write it up as a formal patch.
>>
>> The idea here is kind of obvious: if the freezer was unlucky and tried to freeze
>> when the task was in uninterruptible sleep... cooperate with the freezer ASAP.
>> So add the try_to_freeze() immediately after kernel_recvmsg, since we have a good
>> hunch that kernel_recvmsg is the culprit.
>>
>> ---
>>
>> fs/cifs/connect.c | 2 ++
>> 1 files changed, 2 insertions(+), 0 deletions(-)
>>
>> diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
>> index d6a972d..773bad0 100644
>> --- a/fs/cifs/connect.c
>> +++ b/fs/cifs/connect.c
>> @@ -451,6 +451,8 @@ cifs_readv_from_socket(struct TCP_Server_Info *server, struct kvec *iov_orig,
>> length = kernel_recvmsg(server->ssocket, &smb_msg,
>> iov, segs, to_read, 0);
>>
>> + try_to_freeze();
>> +
>> if (server->tcpStatus == CifsExiting) {
>> total_read = -ESHUTDOWN;
>> break;
>>
>
> That's probably worth a shot since it should tell us something either
> way. If it doesn't work, what may be interesting is a debug patch that
> prints timestamps before and after the kernel_recvmsg call, so we can
> see whether this is spending more time in that call than it should.
>


Right, I agree.

Regards,
Srivatsa S. Bhat



\
 
 \ /
  Last update: 2011-12-01 21:13    [from the cache]
©2003-2011 Jasper Spaans