lkml.org 
[lkml]   [2011]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] x86/PCI: Convert maintaining FW-assigned BIOS BAR values to use a list
Date
From: Myron Stowe <mstowe@redhat.com>

This patch converts the underlying maintenance aspects of FW-assigned
BIOS BAR values from a statically allocated array within struct pci_dev
to a list of temporary, stand alone, entries.

Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
---

arch/x86/pci/i386.c | 2 +-
drivers/pci/setup-res.c | 14 +++++++++-----
include/linux/pci.h | 1 -
3 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 494f2e7..99ba108 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -181,7 +181,7 @@ static void __init pcibios_allocate_resources(int pass)
idx, r, disabled, pass);
if (pci_claim_resource(dev, idx) < 0) {
/* We'll assign a new address later */
- dev->fw_addr[idx] = r->start;
+ pci_save_fw_addr(dev, idx, r->start);
r->end -= r->start;
r->start = 0;
}
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index ab45c11..7e4711e 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -231,7 +231,7 @@ static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev,
}

static int pci_revert_fw_address(struct resource *res, struct pci_dev *dev,
- int resno, resource_size_t size)
+ int resno, resource_size_t fw_addr, resource_size_t size)
{
struct resource *root, *conflict;
resource_size_t start, end;
@@ -239,7 +239,7 @@ static int pci_revert_fw_address(struct resource *res, struct pci_dev *dev,

start = res->start;
end = res->end;
- res->start = dev->fw_addr[resno];
+ res->start = fw_addr;
res->end = res->start + size - 1;

root = pci_find_parent_resource(dev, res);
@@ -322,7 +322,7 @@ int pci_reassign_resource(struct pci_dev *dev, int resno, resource_size_t addsiz
int pci_assign_resource(struct pci_dev *dev, int resno)
{
struct resource *res = dev->resource + resno;
- resource_size_t align, size;
+ resource_size_t align, fw_addr, size;
struct pci_bus *bus;
int ret;

@@ -342,8 +342,12 @@ int pci_assign_resource(struct pci_dev *dev, int resno)
* where firmware left it. That at least has a chance of
* working, which is better than just leaving it disabled.
*/
- if (ret < 0 && dev->fw_addr[resno])
- ret = pci_revert_fw_address(res, dev, resno, size);
+ if (ret < 0) {
+ fw_addr = pci_retrieve_fw_addr(dev, resno);
+ if (fw_addr)
+ ret = pci_revert_fw_address(res, dev, resno, fw_addr,
+ size);
+ }

if (!ret) {
res->flags &= ~IORESOURCE_STARTALIGN;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 14f2492..5a5d2fc 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -299,7 +299,6 @@ struct pci_dev {
*/
unsigned int irq;
struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */
- resource_size_t fw_addr[DEVICE_COUNT_RESOURCE]; /* FW-assigned addr */

/* These fields are used by common fixups */
unsigned int transparent:1; /* Transparent PCI bridge */


\
 
 \ /
  Last update: 2011-11-10 01:47    [W:0.054 / U:1.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site