lkml.org 
[lkml]   [2011]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/10] TTY: serial, fill uart_port_shutdown
Date
Let's fill the port_ops->shutdown. We will need this for hangup and
close port helpers.

We don't need to touch DTR/RTS registers in uart_port_shutdown. They
are set to off from port_close_start properly already.

Also we don't need to pin the TTY_IO_ERROR bit. This will be done in
close/hangup paths.

We leave uart_shutdown as is, because it is used (and will be) from
several paths now. Like from suspend.

The point is to not touch ASYNC_INITIALIZED bit. It will be set (and
checked) properly by the tty port helpers.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Alan Cox <alan@linux.intel.com>
---
drivers/tty/serial/serial_core.c | 42 +++++++++++++++++++++----------------
1 files changed, 24 insertions(+), 18 deletions(-)

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index d7e8a5e..68763c0 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -61,6 +61,8 @@ static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
static void uart_change_pm(struct uart_state *state, int pm_state);

+static void uart_port_shutdown(struct tty_port *port);
+
/*
* This routine is used by the interrupt handler to schedule processing in
* the software interrupt portion of the driver.
@@ -228,24 +230,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
if (!tty || (tty->termios->c_cflag & HUPCL))
uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);

- /*
- * clear delta_msr_wait queue to avoid mem leaks: we may free
- * the irq here so the queue might never be woken up. Note
- * that we won't end up waiting on delta_msr_wait again since
- * any outstanding file descriptors should be pointing at
- * hung_up_tty_fops now.
- */
- wake_up_interruptible(&port->delta_msr_wait);
-
- /*
- * Free the IRQ and disable the port.
- */
- uport->ops->shutdown(uport);
-
- /*
- * Ensure that the IRQ handler isn't running on another CPU.
- */
- synchronize_irq(uport->irq);
+ uart_port_shutdown(port);
}

/*
@@ -1411,6 +1396,27 @@ static int uart_port_activate(struct tty_port *port, struct tty_struct *tty)

static void uart_port_shutdown(struct tty_port *port)
{
+ struct uart_state *state = container_of(port, struct uart_state, port);
+ struct uart_port *uport = state->uart_port;
+
+ /*
+ * clear delta_msr_wait queue to avoid mem leaks: we may free
+ * the irq here so the queue might never be woken up. Note
+ * that we won't end up waiting on delta_msr_wait again since
+ * any outstanding file descriptors should be pointing at
+ * hung_up_tty_fops now.
+ */
+ wake_up_interruptible(&port->delta_msr_wait);
+
+ /*
+ * Free the IRQ and disable the port.
+ */
+ uport->ops->shutdown(uport);
+
+ /*
+ * Ensure that the IRQ handler isn't running on another CPU.
+ */
+ synchronize_irq(uport->irq);
}

static int uart_carrier_raised(struct tty_port *port)
--
1.7.7



\
 
 \ /
  Last update: 2011-11-09 21:37    [W:0.099 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site