lkml.org 
[lkml]   [2011]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] MIPS: Kernel hangs occasionally during boot.
On Tue, Nov 08, 2011 at 09:59:01AM -0500, Al Cooper wrote:

> arch/mips/kernel/cevt-r4k.c | 38 +++++++++++++++++++-------------------
> 1 files changed, 19 insertions(+), 19 deletions(-)
>
> diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
> index 98c5a97..e2d8e19 100644
> --- a/arch/mips/kernel/cevt-r4k.c
> +++ b/arch/mips/kernel/cevt-r4k.c
> @@ -103,19 +103,10 @@ static int c0_compare_int_pending(void)
>
> /*
> * Compare interrupt can be routed and latched outside the core,
> - * so a single execution hazard barrier may not be enough to give
> - * it time to clear as seen in the Cause register. 4 time the
> - * pipeline depth seems reasonably conservative, and empirically
> - * works better in configurations with high CPU/bus clock ratios.
> + * so wait up to worst case number of cycle counter ticks for timer interrupt
> + * changes to propagate to the cause register.
> */
> -
> -#define compare_change_hazard() \
> - do { \
> - irq_disable_hazard(); \
> - irq_disable_hazard(); \
> - irq_disable_hazard(); \
> - irq_disable_hazard(); \
> - } while (0)
> +#define COMPARE_INT_SEEN_TICKS 50
>
> int c0_compare_int_usable(void)
> {
> @@ -126,8 +117,12 @@ int c0_compare_int_usable(void)
> * IP7 already pending? Try to clear it by acking the timer.
> */
> if (c0_compare_int_pending()) {
> - write_c0_compare(read_c0_count());
> - compare_change_hazard();
> + cnt = read_c0_count();
> + write_c0_compare(cnt);
> + back_to_back_c0_hazard();

back_to_back_c0_hazard is to separate cp0 writes from subsequent reads from
the same cp0 register. So I think no back_to_back_c0_hazard() is needed
here.

> + while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
> + if (!c0_compare_int_pending())
> + break;
> if (c0_compare_int_pending())
> return 0;
> }
> @@ -136,7 +131,7 @@ int c0_compare_int_usable(void)
> cnt = read_c0_count();
> cnt += delta;
> write_c0_compare(cnt);
> - compare_change_hazard();
> + back_to_back_c0_hazard();

Same comment as above.

> if ((int)(read_c0_count() - cnt) < 0)
> break;
> /* increase delta if the timer was already expired */
> @@ -145,12 +140,17 @@ int c0_compare_int_usable(void)
> while ((int)(read_c0_count() - cnt) <= 0)
> ; /* Wait for expiry */
>
> - compare_change_hazard();
> + while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
> + if (c0_compare_int_pending())
> + break;
> if (!c0_compare_int_pending())
> return 0;
> -
> - write_c0_compare(read_c0_count());
> - compare_change_hazard();
> + cnt = read_c0_count();
> + write_c0_compare(cnt);
> + back_to_back_c0_hazard();
> + while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
> + if (!c0_compare_int_pending())
> + break;
> if (c0_compare_int_pending())
> return 0;

I've applied your patch but we may need another hazard barrier to
replace back_to_back_c0_hazard().

Ralf


\
 
 \ /
  Last update: 2011-11-08 18:57    [W:3.876 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site