lkml.org 
[lkml]   [2011]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] Input: tsc2007 - Disable irq when the irq thread is handling data
Hi Feng,

On Tue, Nov 29, 2011 at 04:12:57PM +0800, Feng Tang wrote:
> The TSC2007 data sheet say in some case the HW may fire some false
> interrrupt, which I also met during integrating one TSC2007 device.
> So add the disable_irq/enable_irq protection around data handling.

IRQF_ONESHOT should prevent IRQ from firing again while thread is
servicing it. Did you actually observe it not working?

Thanks.

>
> Signed-off-by: Feng Tang <feng.tang@intel.com>
> ---
> drivers/input/touchscreen/tsc2007.c | 8 ++++++++
> 1 files changed, 8 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
> index 1f674cb..789f216 100644
> --- a/drivers/input/touchscreen/tsc2007.c
> +++ b/drivers/input/touchscreen/tsc2007.c
> @@ -171,6 +171,13 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle)
> struct ts_event tc;
> u32 rt;
>
> + /*
> + * Disable the irq, as it may fire several other IRQs during
> + * this thread is handling data, as suggested by the TSC2007
> + * datasheet, p19, "Touch Detect" chapter
> + */
> + disable_irq_nosync(irq);
> +
> while (!ts->stopped && tsc2007_is_pen_down(ts)) {
>
> /* pen is down, continue with the measurement */
> @@ -221,6 +228,7 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle)
> if (ts->clear_penirq)
> ts->clear_penirq();
>
> + enable_irq(irq);
> return IRQ_HANDLED;
> }
>
> --
> 1.7.1
>
>

--
Dmitry


\
 
 \ /
  Last update: 2011-11-29 10:31    [W:0.081 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site